• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.936-938
• /
• 2011

This paper suggests the slot wedge shape for reducing the cogging torque of a gearless type direct-drive permanent magnet synchronous generator with open slot shape. To achieve this, we are designed the appropriate specifications of the permanent magnet synchronous generator by selected the appropriate material of slot wedge and various slot wedge shapes. The PMSG models were analyzed by finite element method. Finally, we have suggested appropriate material of slot wedges and its shape which has benefit to further reducing cogging torque and preventing decreasing of the generating power.

• 한국전산유체공학회지
• /
• 제16권1호
• /
• pp.14-21
• /
• 2011

Super-cavitating flows around under-water bodies are being studied for drag reduction and dramatic speed increase. In this paper, high speed super-cavitating flow around a two-dimensional symmetric wedge-shaped body were studied using an unsteady Reynolds-averaged Navier-Stokes equations solver based on a cell-centered finite volume method. To verify the computational method, flow over a hemispherical head-form body was simulated and validated against existing experimental data. Various computational conditions, such as different wedge angles and caviation numbers, were considered for the super-cavitating flow around the wedge-shaped body. Super-cavity begins to form in the low pressure region and propagates along the wedge body. The computed cavity lengths and velocities on the cavity boundary with varying cavitation number were validated by comparing with analytic solution.

• 대한수학회보
• /
• 제54권1호
• /
• pp.265-276
• /
• 2017

Let K be a fan-like simplicial sphere of dimension n-1 such that its associated complete fan is strongly polytopal, and let v be a vertex of K. Let K(v) be the simplicial wedge complex obtained by applying the simplicial wedge operation to K at v, and let $v_0$ and $v_1$ denote two newly created vertices of K(v). In this paper, we show that there are infinitely many strongly polytopal fans ${\Sigma}$ over such K(v)'s, different from the canonical extensions, whose projected fans ${Proj_v}_i{\Sigma}$ (i = 0, 1) are also strongly polytopal. As a consequence, it can be also shown that there are infinitely many projective toric varieties over such K(v)'s such that toric varieties over the underlying projected complexes $K_{{Proj_v}_i{\Sigma}}$ (i = 0, 1) are also projective.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.249-249
• /
• 2006

We have prepared an amphiphilic wedge-coil molecule consisting of a hydrophobic wedge-like segment and a hydrophilic poly(ethylene oxide) (PEO) segment. The wedge-coil block molecule self-assembles into cylindrical nanofibers in both polar as well as nonpolar solvents. Remarkably, the resulting nanofibers, as solvent polarity change from water to n-hexane, change from highly flexible coil-like to stiff rod-like characteristics. This dynamic switching in the stiffness of the nanofibers in response to solvent polarity is attributed to the structural inversion of cylindrical core from bulky dendritic segments with amorphous nature to crystallizable linear PEO segments.

• Kyungpook Mathematical Journal
• /
• 제52권4호
• /
• pp.405-412
• /
• 2012

The purpose of the present paper is towards working out a unified version of the study of certain weak forms of generalized open sets and their neighbouring forms, as are already available in the literature. In terms of an operation, as initiated by $\acute{A}$. Cs$\acute{a}$sz$\acute{a}$r, we introduce unified definitions of ${\wedge}_{\psi}$-sets, ${\vee}_{\psi}$-sets, $g{\cdot}{\wedge}_{\psi}$-sets and $g{\cdot}{\vee}_{\psi}$-sets and derive results concerning them.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 춘계학술대회 논문집
• /
• pp.400-403
• /
• 2004

A non-heat기leafed steel does not need quenching and tempering processes that are called a heat treatment differently from conventional steel. Since the tensile strength of this steel is higher than 900MPa, a conventional forming process should be changed to incremental forming process such as a cross wedge rolling that requires lower load capacity than conventional ones. In this paper, the cold cross wedge rolling (CWR) die has been designed using CAD/CAE In order to produce near-net-shaped component of ball stud of non-heat-treated cold steel. Finite element analyses were applied in order to investigate process parameters of CWR. Results provide that the stretching angle and the forming angie at knifing zone in CWR process is important parameter to be the stable process under the low friction coefficient condition.

• Journal of the Optical Society of Korea
• /
• 제18권6호
• /
• pp.679-684
• /
• 2014

Enhanced analysis is performed to design a wedge projection system with a slab structure that increases the projected image size. The specification values of the system such as the length of the slab structure and the imaging region are calculated and investigated using an optical simulation tool. We also propose a split imaging region method to represent a large tiled scene using the thin wedge waveguide structure. Experiments are performed to verify the feasibility of the proposed method.

• 대한전자공학회논문지
• /
• 제25권8호
• /
• pp.874-883
• /
• 1988

A complete form of physical optics solution to the diffraction of electromagnetic waves by a dielectric wedge with arbitrary dielectric constant and general wedge angle is obtained for an incident plane wave with any angle. Based on the formulation of dual integral equation in the spectral domain, the physical optics solution is constructed by sum of geometrical optics term including multiple reflection inside the wedge and the edge diffracted field, of which diffraction functions are represented in a quite simple form as series of cotangent functions weighted by the Fresnel reflection coefficients. Since diffraction patterns of physical optics are discontinous at dielectric interfaces, Part II and III of these three companion papers will be concerned with correction to the error of the physical optics approximation.

• 전자공학회논문지D
• /
• 제36D권1호
• /
• pp.22-28
• /
• 1999

H-분극된 평면파가 입사되는 완전도체쇄기에 대해 급수형태의 정확한 경계면 전자파를 파수영억역에서의 쌍적분 방정식에 대힙하여 해석적으로 적분함으로써 검근해를 유도하였다. 가상공간에서 적분 결과가 0이 되는 것을 보임으로써 적분 과정의 타당성을 보였다. 완전도체쇄기의 점근해 유도과정에 쌍적분 방정식을 이동함으로써 얻은 잇점에 대해 살펴보았다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.240-247
• /
• 2010

The soil nailing system is becoming common as reinforcement method of slope face in soil. It has application to obtain slope stability method and scaffolding system. It has some troubles when the soil nailing system is applied to the downtown because it could be invaded someone's private area. Thus, in this paper, wedge type removable soil nailing system which can easily remove deformed bar in final excavation step is developed. Field pull-out test is performed to evaluate deformed bars removal and pullout resistance characteristics. According to this result, application of Wedge Type Removable Soil Nailing System is performed.