• 한국치위생학회지
• /
• 제17권5호
• /
• pp.827-840
• /
• 2017

Objectives: The purpose of this study was to investigate the relationship between demographic characteristics, health factors, oral health factors and subjective body shape perception of adolescents in order to provide basic data for adolescents health management. Methods: This study was analyzed using Korea Youth Risk Behavior Web-Based Survey in 2015, where 68,043 adolescents in total participated. Data were analyzed by SPSS Ver. 21.0. Multiple regression analysis was used to analyze the relationships among health factors and oral health factors related to subjective body shape perception. Results: The analysis of the factors influencing the body shape perception of male adolescents showed that they tend to be low in school performance, low in family economic level, and high school students. The worse they perceive their subjective health to be, the more they feel stress, and the less frequently they brush their teeth per day. They had bad breath. The analysis of the factors influencing the body shape perception of female adolescents showed that they tend to be low in school performance, low in family economic level, and high school students. The worse they feel their subjective health is, the more they feel unhappy, and stressful, and the less frequently they brush their teeth per day. They feel pain during chewing, and have bad breath. Conclusions: In conclusion, it is necessary to consider educational intervention in adolescent life that will make them have proper perception of their body shape for proper health management of it. To make the intervention effective, we need to consider various factors such as health factors and oral health factors.

• Advances in concrete construction
• /
• 제15권5호
• /
• pp.321-331
• /
• 2023

The effect of fibre-reinforced polymer (FRP) strengthening on the behaviour of reinforced concrete (RC) beams with web openings is studied. It has been observed that the load-carrying capacity and deflection in the presence of an opening reduced by approximately 50% and 75%, respectively. Three-dimensional nonlinear finite models are first validated with the results obtained from experimental data. Thereafter, a series of parametric studies are conducted for the beam with an opening. In the study, it is observed that a square opening shape is critical in comparison to the elliptical and circular-shaped opening. The web opening located near the support is found to be critically compared to the opening in the middle of the beam. Given the critical opening shape situated at the critical location, the increase in FRP layers enhances the load-deformation behaviour of the FRP-wrapped RC beam. However, the load-deformation responses are not significantly improved beyond a certain threshold value of FRP layers.

• 한국공간구조학회논문집
• /
• 제1권1호
• /
• pp.135-142
• /
• 2001

This paper proposes structural analysis on the World Wide Web to form a part of the architectural design project. It purposes modeling space frames and a structural analysis program on the internet only by inputting basic data for forming a shape in the whole phase of space frame analysis. The analysis data is conducted by Oracle DBMS(DataBase Management System), GUI(Graphic User Internet) by Java Applet and connection with server and database by Java Servlet respectively. The result from modeling and analysis is provided as graphic and text file forms by web browsers. Programs can be executed irrespective of user's OS by using internet and highly-secured system is constructed taking advantage of Java. Of great efficiency is maintaining and recycling data as the whole is dealt by database from the beginning to the end of program.

• 한국강구조학회 논문집
• /
• 제18권1호
• /
• pp.81-91
• /
• 2006

파형 강판은 파형 형상으로 가공한 강판으로 교량, 건축물, 암거 등의 구조물에 많이 사용된다. 파형강판을 이용한 거더의 구조물 적용시 국부적인 면내 압축하중에 의해 크리플링현상이 발생할 수 있는데 높은 면외방향의 강성을 갖는 파형강판의 특성 때문에 보강재를 사용하지 않는 경우가 많이 있고 파형형상에 따라 지압하중의 경계조건이 달라진다. 몇 연구자들이 제형파형강판의 지압강도에 대한 연구를 하였으나 파형형상이 지압강도에 미치는 영향이 크게 고려되지 않았다. 따라서 본 연구에서는 이에 따른 영향을 유한 요소해석법을 통하여 여러 가지 파형형상에 대한 변수해석을 하고 지압강도를 복부판 내하력과 플랜지 내하력으로 나누어 파형 형상과 지압강도와의 상관관계를 파악하였다.

• 한국정밀공학회지
• /
• 제17권12호
• /
• pp.107-114
• /
• 2000

Rollers and rolls in the continuous process systems are noes of key components that determine the quality of web products. The condition of rollers and rolls(ex. eccentricity wear) should be consistently monitored in order to maintain the process conditions (ex. tension, edge position) within a required specification. In this paper, a new diagnosis technique is suggested to detect the defect of rollers/rolls (ex. eccentricity, wear) based on frequency domain analysis of web tension signal. The kernel of this technique is to use the spectrum amplitude of tension signal which allows to identify the fault rollers/rolls and to also diagnose the degree of fault in corresponding rollers and rolls. The experimental results proved that the suggested diagnosis technique can be successfully used to identify the defect rollers and rolls as well as to diagnose the degree of the defect of those rollers. The suggested technique can be applied to monitor and diagnose the shape of rollers and rolls in various multi-span web transport systems.

• 한국식생활문화학회지
• /
• 제35권6호
• /
• pp.538-552
• /
• 2020

Tis study was an attempt to systematically analyze the characteristics of modern Korean food styling using the menu image photos of the Michelin Guide Seoul 2020 restaurants. The first sampling was conducted on the 27th of March 2020 and the second on the 27th of October 2020. A collection of images on the web and 442 photographic cases obtained by a search through theoretical background literature and research papers were studied by a qualitative analysis method. First, the food styling contents were analyzed and based on that, the food styling characteristics of the menus of 11 restaurants in Korea including the contemporary restaurants were considered. The analysis revealed several aspects of Korean food styling. First, food styling appeared to have three major characteristics: color, shape, and container styling. Color styling was further subdivided into single color/similar color, color contrast, source type, and accent color type. The shape/formative styling was classified into figure type, shape type, accessory type, and garnish type, and container styling was categorized as container color type, container shape type, and container material type. Second, the modern Korean food color styling characteristics of Michelin restaurants were categorized in the order of monochromatic/similar type, sauce type, accent color type, and color contrast. In the formative styling category, it was categorized in the order of shape type, small piece type, garnish/garnish type, and figure type. In container styling, container material type and formative type accounted for the major portion of the category. The food styling characteristics of the modern Korean menu were systematized and image examples were presented visually. Please use it as food styling educational material or personal food styling skill.

• EDISON SW 활용 경진대회 논문집
• /
• 제4회(2015년)
• /
• pp.217-222
• /
• 2015

In this paper, a study was conducted for the optimization through shear web of shape the Edison program in wind power blade. We measured the displacement and stress distribution through two optimization methods to select the model with the smallest displacement and stress values. Before running the analysis, We try to find the inflection point through the shear web of the model and then analyze by introducing the geometric nonlinearity. The first optimization variables are introduced by the pitch angle and three web shapes. Third model such a honeycomb structure is good way to get an advantage for bending test. According to a method of previous optimization, third model is chosen and then the thickness of the web and blade as a variable is introduced, it is extracted as a result of displacement and the maximum stress per mass.

• Journal of Mechanical Science and Technology
• /
• 제16권12호
• /
• pp.1604-1612
• /
• 2002

Rollers in the continuous process systems are ones of key components that determine the quality of web products. The condition of rollers (e.g. eccentricity, runout) should be consistently monitored in order to maintain the process conditions (e.g. tension, edge position) within a required specification. In this paper, a new diagnosis algorithm is suggested to detect the defective rollers based on the frequency analysis of web tension signals. The kernel of this technique is to use the characteristic features (RMS, Peak value, Power spectral density) of tension signals which allow the identification of the faulty rollers and the diagnosis of the degree of fault in the rollers. The characteristic features could be used to train an artificial neural network which could classify roller conditions into three groups (normal, warning, and faulty conditions) The simulation and experimental results showed that the suggested diagnosis algorithm can be successfully used to identify the defective rollers as well as to diagnose the degree of the defect of those rollers.

• Steel and Composite Structures
• /
• 제43권2호
• /
• pp.271-278
• /
• 2022

Buckling is one of the most critical phoneme in the design of steel structures. Lateral torsional buckling (LTB) is particularly significant for slender beams generally subjected to loading in plane. The web distortion effects on LTB are not addressed explicitly in standards for flexural design of steel I-section members. Hence, the present study is focused to predict the influence of the web distortion on the elastic (L_r) limiting lengths given in American Institute of Steel Construction (AISC) code for the lateral torsional buckling (LTB) behavior of steel beams due to no provision in the code for consideration of web distortion. For this aim, the W44x335 beam is adopted in the buckling analysis carried out by the ABAQUS finite element (FE) program since it is one of the most critical sections in terms of lateral torsional buckling (LTB). The strain results at mid-height of the web at mid-span of the beam are taken into account as the monitoring parameters. The web strain results are found to be relatively greater than the yield strain value when L/L_r is equal to 1.0. In other words, the ratio of L/L_r is estimated from the numerical analysis to be about 1.5 when the beam reaches its first yielding at mid-span of the beam at mid-height of the section. Due to the effect of web distortion, the elastic limiting length (L_r) from the numerical analysis is obtained to be considered as greater than the calculated length from the code formulation. It is suggested that the formulations of the limiting length proposed in the code can be corrected considering the influence of the web distortion. This correction can be a modification factor or a shape factor that reduces sectional slenderness for the LTB formulation in the code.

• 한국콘텐츠학회논문지
• /
• 제10권3호
• /
• pp.44-52
• /
• 2010

인터넷에서 가장 많이 사용하고 있는 월드 와이드 웹(world wide web) 트래픽은 트랜스포트 계층 프로토콜로 TCP를 사용하고 있다. TCP는 단일 경로를 사용하므로 경로상의 링크가 다운(down)된 후 다시업(up)될 때까지의 시간동안 통신할 수 없다. 이에 비해 SCTP는 다중 경로를 사용하므로 1차 경로가 다운되어도 대체 경로를 이용하여 통신이 가능하다. TCP와 SCTP의 성능을 비교하는 기존 연구들은 주로 파일 전송을 사용하여 수행되었고, 링크다운 환경에서 웹 트래픽을 다룬 연구는 없었다. 자기-유사성의 특징을 갖는 웹 트래픽은 웹 파일의 크기에 영향을 주는 파레토 분포의 형태(shape) 파라미터와 평균 도착 시간간격에 의해 특징지어지므로 이 두 개의 파라미터에 따른 성능 비교가 필요하다. 따라서 본 연구에서는 링크다운 환경에서 웹 트래픽의 특성을 반영하는 두 개의 파라미터를 변화시키면서 TCP와 SCTP의 처리율을 비교하였다. NS-2 시뮬레이션을 사용한 웹 트래픽의 실험 결과는 멀티호밍을 사용한 SCTP의 처리율이 TCP의 처리율보다 우수함을 보여주었다. 특히 웹 트래픽의 특성과 관련해서는 TCP가 SCTP에 비해 평균 도착시간 간격과 형태 파라미터에 더 많은 영향을 받았다. 이 연구의 결과는 링크의 다운기간에 따른 웹 트래픽의 성능변화를 예측하는 데 이용될 수 있다.