• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.259-260
• /
• 2006

City Train Technology that is large and complex system and consists of mechanical, electronic, electric, materials, computer, communication, civil/track etc. is very important area of railway industry, national fundamental industry. The standardization of city train system as a public transportation method and foundation of national economy is very important in order to do effective operation and to get fundamental technology, and the information system of the standards is required to operate the city train system effectively. By building data base of city train system design knowledge using computer-aided system engineering tool-Cradle, the system development issues and the design solutions are used by all engaged persons, and are managed by modeling and documentation. And this system will support architecture design consistently and effectively by applying this system to formalize early development process, to system requirements and configuration management, to system interface analysis and management and to system behavior analysis etc.. This study is for construction of data base of system design knowledge through making data base of many kinds of standards using CASE tool based on System Engineering Process, and introduces a model to support concurrent engineering for all engineers involved in system development allowing access to standard DB through Web from anywhere and at anytime.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.1093-1094
• /
• 2006

City Train Technology that is large and complex system and consists of mechanical, electronic, electric, materials, computer, communication, civil/track etc. is very important area of railway industry, national fundamental industry. The standardization of city train system as a public transportation method and foundation of national economy is very important in order to do effective operation and to get fundamental technology, and the information system of the standards is required to operate the city train system effectively. By building data base of city train system design knowledge using computer-aided system engineering tool-Cradle, the system development issues and the design solutions are used by all engaged persons, and are managed by modeling and documentation. And this system will support architecture design consistently and effectively by applying this system to formalize early development process, to system requirements and configuration management, to system interface analysis and management and to system behavior analysis etc.. This study is for construction of data base of system design knowledge through making data base of many kinds of standards using CASE tool based on System Engineering Process, and introduces a model to support concurrent engineering for all engineers involved in system development allowing access to standard DB through Web from anywhere and at anytime.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1996년도 가을 학술발표회 논문집
• /
• pp.337-344
• /
• 1996

Reinforced concrete deep beams with conpressive strengths in the range of 500kg/$\textrm{cm}^3$~750kg/$\textrm{cm}^3$ were tested under two-point loding. All the beams were singly reinforced with main steel percent $\rho$=1.29% and with nominal percentage of vertical shear reinflrcements $\rho_v$=0.26%. According to shear-span to depth ratio a/d. The beams were tested for four horizontal shear reinforcement ratio $\rho_h$, ranging from$\rho_h$=0.0 to $\rho_h$=0.53. The results indicate that the horizontal shear reinforcements of beams have an effect on failure load and on ductile behavior of deep beams. The test results are compared with predictions based on the current ACI Building Code. The computated reports in the paper will have designers assured for design of high strength concrete deep beam. Though ACI Code is relatively conservative and tend to non-economical, ACI Code has the merit that is easy to use.

• International Journal of Computer Science & Network Security
• /
• 제23권8호
• /
• pp.63-76
• /
• 2023

Identity and access management in cloud computing is one of the leading significant issues that require various security countermeasures to preserve user privacy. An authentication mechanism is a leading solution to authenticate and verify the identities of cloud users while accessing cloud applications. Building a secured and flexible authentication mechanism in a cloud computing platform is challenging. Authentication techniques can be combined with other security techniques such as intrusion detection systems to maintain a verifiable layer of security. In this paper, we provide an interactive, flexible, and reliable multi-factor authentication mechanisms that are primarily based on a proposed Authentication Method Selector (AMS) technique. The basic idea of AMS is to rely on the user's previous authentication information and user behavior which can be embedded with additional authentication methods according to the organization's requirements. In AMS, the administrator has the ability to add the appropriate authentication method based on the requirements of the organization. Based on these requirements, the administrator will activate and initialize the authentication method that has been added to the authentication pool. An intrusion detection component has been added to apply the users' location and users' default web browser feature. The AMS and intrusion detection components provide a security enhancement to increase the accuracy and efficiency of cloud user identity verification.

• International Journal of Concrete Structures and Materials
• /
• 제6권2호
• /
• pp.65-78
• /
• 2012

An experimental study was carried out to evaluate fresh properties of a moderately high-strength (high-flowing) self-compacting concrete (SCC) and to investigate shear behavior and performance of deep beams made with SCC. Fresh and hardened properties of normal concrete (NC) and SCC were evaluated. The workability and compacting ability were observed based on casting time and number of surface cavities, respectively. Four-point loading tests on four deep beams (two made with SCC and two with NC) were then conducted to investigate their shear behavior and performance. Shear behavior and performance of beams having two different web reinforcements in shear were systematically investigated in terms of crack pattern, failure mode, and load-deflection response. It was found from the tests that the SCC specimen having a normal shear reinforcement condition exhibited a slightly higher load carrying capacity than the corresponding NC specimen, while the SCC specimen having congested shear reinforcement condition showed a similar load carrying capacity to the corresponding NC specimen. In addition, a comparative study between the present experimental results and theoretical results in accordance with ACI 318 (Building Code Requirements for Reinforced Concrete (ACI 318-89) and Commentary-ACI 318R-89, 1999), Hsu-Mau's explicit method (Hsu, Cem Concr Compos 20:419-435, 1998; Mau and Hsu, Struct J Am Concr Inst 86:516-523, 1989) and strut-and-tie model suggested by Uribe and Alcocer (2002) based on ACI 318 Appendix A (2008) was carried out to assess the applicability of the aforementioned methods to predict the shear strength of SCC specimens.

• 콘크리트학회논문집
• /
• 제17권6호
• /
• pp.963-974
• /
• 2005

본 논문은 고강도 콘크리트로 타설된 2개의 대형 프리스트레스트 콘크리트 보로부터 얻어진 4개의 전단실험 결과를 고찰하였다. 특히 경사진 프리스트레싱 긴장재가 부재의 전단거동에 미치는 영향을 세밀히 분석하였다. 본 실험에서 경사진 프리스트레싱 긴장재를 사용한 부재는 직선 프리스트레싱 긴장재를 사용한 부재에 비해 높은 초기전단균열강도와 전단강도를 가졌다. 또한 실험 결과는 경사진 프리스트레싱 긴장재의 사용이 부재 단부에서 긴장재의 미끄러짐을 감소시켜주는 것으로 관찰되어 부재 단부에서 크게 요구되는 단부 정착력을 분산시키는데 효과적임을 보여주었다. 실험 결과로부터 얻어진 부재의 전단강도는 ACI 318-02와 AASHTO LRFD의 전단설계기준에 의하여 계산된 값과 비교 분석되었다. 두 전단설계기준은 모든 시험체에 대해 안정적인 전단강도를 제공하였으며, 특히 경사진 프리스트레싱 긴장재를 가진 부재들에 대해서 실험결과에 비해 매우 낮은 전단강도를 제공하였다.

• Structural Engineering and Mechanics
• /
• 제40권1호
• /
• pp.65-84
• /
• 2011

In this paper a simple mathematical model for approximate static analysis of combined system of framed tube, shear core and two outrigger-belt truss structures subjected to lateral loads is presented. In the proposed methodology, framed tube is modeled as a cantilevered beam with a box section and interaction between shear core and outrigger-belt truss system with framed tube is modeled using torsional springs placed at location of outrigger-belt truss; these torsional springs act in a direction opposite to rotation generated by lateral loads. The effect of shear lag on axial deformation in flange is quadratic and in web it is a cubic function of geometry. Here the total energy of the combined system is minimized with respect to lateral deflection and rotation in plane section. Solution of the resulting equilibrium equations yields the unknown coefficients of shear lag along with the stress and displacement distributions. The results of a numerical example, 50 storey building subjected to three different types of lateral loading obtained from SAP2000 are compared to those of the proposed method and the differences are found to be reasonable. The proposed method can be used during the preliminary design stages of a tall building and can provide a better understanding of the effects of various parameters on the overall structural behavior.

• 한국건설순환자원학회논문집
• /
• 제5권3호
• /
• pp.282-289
• /
• 2017

압축강도 160MPa와 길이 15.4m를 가진 초고강도 섬유보강 분절 박스거더에 대한 휨거동 실험을 수행하였다. 실험 변수로는 PS강재의 면적, 강섬유 혼입률과 복부와 상부 플랜지의 종방향 철근이다. 하부플랜지의 두 개 텐던에 16개, 12개, 7개씩을 배치하고, 강섬유 혼입률은 2.0%, 1.5%, 1%를 사용하였다. 하부에 32개의 강연선을 배근한 박스거더는 과보강 강재 거동을 보였으며, 24개의 강연선을 배근한 거더는 강연선 32개를 설치한 거더와 비슷한 최대하중을 보이면서 처짐이 많은 저보강 강재 거동을 보였다. 강연선을 14개 설치한 박스거더는 24개 설치한 거더 내하력의 1/2정도 최대하중을 보이며, 연성거동을 보이고 있다. 설계기준의 강재지수에 따른 보 파괴거동의 분류에 대한 식의 유효성을 검토한 결과 지수 판별식은 초고강도 박스거더의 거동을 정확하게 반영하지 못하고 있으며, 박스거더의 기하학적 형태를 세부적으로 고려하고, 강재의 변형률 0.005에 해당하는 기준값을 새로 산정해야할 것으로 판단된다.

• 컴퓨터교육학회논문지
• /
• 제9권1호
• /
• pp.71-80
• /
• 2006

전자상거래가 급속도로 발전함에 따라 고객들의 행동 패턴을 어떻게 발견하느냐와 웹 마이닝 기술을 사용하는 것에 의해 어떻게 상거래를 지능화 할 것인가에 대한 연구가 진행되고 있다. 현재까지 개인화와 상품 추천 시스템을 만들기 위해 가장 성공적이고 가장 넓게 사용되는 기술은 협업필터링 방법이다. 그러나 협업 필터링 방법은 특정 수 이상의 아이템에 대한 평가가 필요하다는 문제를 가지고 있다. 또한, 기존의 연관 규칙 기법은 개인별 사용자의 성향을 반영하지 못하는 단점을 가지고 있다. 본 논문에서는 개선된 Apriori 알고리즘을 이용하고, 아이템들 간에 상호 관계를 가진 협업 필터링 방법을 사용하여 사용자 성향이 반영된 상품 추천 시스템을 개발하였다.

• International Journal of Knowledge Content Development & Technology
• /
• 제10권4호
• /
• pp.65-82
• /
• 2020

This study examined information sharing and evaluation as determinants of the spread of fake news among Nigerian youths on social media using experience from COVID-19 pandemic. A descriptive survey design was adopted for the study and a Web-based questionnaire (Google Forms) was used to collect data for the study. The total responses of 278 were collected from the participants, which represents the unit of analysis. The finding of the study revealed that most Nigerian youths used Facebook, Twitter, WhatsApp and Instagram to share information on COVID-19. However, only a few Nigerians used Linkedln and other types of social media to share information on COVID-19. It was also found that building a relationship with social media communities, enjoyment and risk taking, and political inclination influence the sharing behavior of Nigerian youths during the COVID-19 pandemic. Results show that social media handle/page found sharing of fake news on COVID-19 especially on the treatment, vaccines numbers of cases and symptoms. The study concludes that there is a positive relationship between information evaluation and the spreading of fake news on COVID-19 among Nigerians. Information sharing and evaluation should be done with the utmost level of objectivity and sincerity.