• Journal of Korean Society on Water Environment
• /
• v.31 no.1
• /
• pp.55-66
• /
• 2015

It has been well known that it is not easy to quantify pollutant loads driven by non-point source pollution due to various factors affecting generation and transport mechanism of it. Especially pollutant loads through baseflow have been investigated by limited number of researchers. Thus in this study, the Web-based WAPLE (WHAT-Pollutant Load Estimation) system was developed and applied at study watersheds to quantify baseflow contribution of pollutant. In YbB watershed, baseflow contribution with WWTP discharge is responsible for 49.5% of total pollutant loads at the watershed. Among these, pollutant loads through baseflow (excluding any WWTP discharge) is responsible for 61.7% of it. In GbA watershed, it was found that 58.4% is contributed by baseflow with WWTP discharge 2.9% and 97.1% is by baseflow. For NbB watershed (without WWTP discharge), 52.3% of pollutant load is transported through baseflow. As shown in this study, it was found that over 50.0% of TN (Total Nitrogen) pollutant loads are contributed by non-direct runoff. Thus pollutant loads contributed by baseflow and WWTP discharge as well as direct runoff contribution should be quantified to develop and implement watershed-specific Best Management Practices during dry period.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.27 no.3
• /
• pp.459-466
• /
• 2017

One of the most widely-used open source project; OpenSSL is a cryptography library that is used to secure most web sites, servers and clients. One can secure the communication with the Secure Socket Layer (SSL) or its successor, Transport Layer Security (TLS) protocols by using the OpenSSL library. Since cryptography protocols will be updated and enhanced in order to keep the system protected, the library was written in such a way that simplifies the integration of new cryptographic methods, especially for the symmetric cryptography protocols. However, it gets a lot more complicated in adding an asymmetric cryptography protocol and no guide can be found for the integration of the asymmetric cryptography protocol. In this paper, we explained the architecture of the OpenSSL library and provide a simple tutorial to modify the OpenSSL library in order to accommodate custom protocols of both symmetric and asymmetric cryptography.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.4
• /
• pp.559-569
• /
• 2022

Infrastructure engineering is a field that supports construction (assembly) as a representative industry that creates high added value and jobs by combining science and technology with knowledge, though its importance is underestimated. According to a report from the Ministry of Land, Infrastructure and Transport (Korea), the value-added rate (65.3%) of the engineering industry and the employment inducement coefficient (14 employees per billion won) are three times higher than in manufacturing. In particular,the forward value chain (such as project management and basic design) accounts for less than 10~15% of the total project cost but determines the overall price and quality of the infrastructure facilities. In this study, a work break-down system, design support module and database development method for road design projects for design platform development is presented. Based on the presented development method, a cloud-based infrastructure design platform's prototype is developed. The developed infrastructure engineering platform is expected to provide a web-based design work environment without time/space restrictions and greatly contribute to winning overseas business orders and securing competitiveness.

• Korea Trade Review
• /
• v.46 no.5
• /
• pp.65-81
• /
• 2021

The technological development in the era of the 4th industrial revolution is changing the paradigm of various industries. Various technologies such as big data, cloud, artificial intelligence, virtual reality, and the Internet of Things are used, creating synergy effects with existing industries, creating radical development and value creation. Among them, the logistics sector has been greatly influenced by quantitative data from the past and has been continuously accumulating and managing data, so it is highly likely to be linked with big data analysis and has a high utilization effect. The modern advanced technology has developed together with the data mining technology to discover hidden patterns and new correlations in such big data, and through this, meaningful results are being derived. Therefore, data mining occupies an important part in big data analysis, and this study tried to analyze data mining techniques that can contribute to the logistics field and common logistics using these data mining technologies. Therefore, by using the AHP technique, it was attempted to derive priorities for each type of efficient data mining for logisticalization, and R program and R Studio were used as tools to analyze this. Criteria of AHP method set association analysis, cluster analysis, decision tree method, artificial neural network method, web mining, and opinion mining. For the alternatives, common transport and delivery, common logistics center, common logistics information system, and common logistics partnership were set as factors.

• Journal of Korea Multimedia Society
• /
• v.7 no.1
• /
• pp.12-26
• /
• 2004

In the past, geographic data is constructed and serviced through independent formats of its own according to each GIS(Geographic Information System). Recently the provision of interoperability in GIS is important to efficiently apply the various geographic data between conventional GIS's. Whereupon OGC(Open GIS Consortium) proposed GML(Geography Markup Language) to offer the interoperability between heterogeneous GISs in distributed environments. The GML is an XML encoding for the transport and storage of geographic information, including both the spatial and non-spatial properties of geographic features. Also, the GML includes Web Map Server Implementation Specification to service the GML documents. Accordingly the prototype to provide the reciprocal interchange of geographic information between conventional GIS's and GML documents is widely studied. In this paper, we propose a mapping method of geographic in formation between spatial database and GML for the prototype to support the interoperability between heterogeneous geographic information. For this method, firstly the scheme of converting geographic in Formation of the conventional spatial database into the GML document according to the GML specification is explained, and secondly the scheme to transform geographic information of GML documents to geographic data of spatial database is showed. Consequently, the proposed method is applicable to the framework for integrated geographic information services based on Web by making an offer the interoperability between already built geographic information of conventional GIS's using a mapping method of geographic information between spatial database and GML.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.23 no.4
• /
• pp.173-183
• /
• 2020

In the midst of the aging of underground facilities in urban areas and anxiety about road excavation safety accidents, the Ministry of Land, Infrastructure and Transport began to build Underground Geospatial Infomation Map from 2015 as part of the 「ground subsidence prevention measures」 and efficient use of underground spaces. So, the scope is spreading every year. The current Underground Geospatial Infomation Map information is web-based and is operated in a desktop environment, so it is true that there are some limitations in its use in a field environment such as an excavation construction site. The Underground Geospatial Infomation Map, built and operated in a web-based environment, is a large-scale 3D data. Therefore, in order to service by transmitting data to the field without delay, it is necessary to lighten the Underground Geospatial Infomation Map data. In addition, the current Underground Geospatial Infomation Map is not unified in data formats such as 3DS and COLLADA, and the coordinate system method is also different in relative coordinates and absolute coordinates. In this study, by analyzing domestic and overseas prior research and technical use cases, a mobile Underground Geospatial Infomation Map data format and a lightweight method were presented, and a technology development was conducted to create a mobile underground space integration map in the presented format. In addition, the weight reduction rate was tested by applying 3D data compression technology so that data can be transmitted quickly in the field, and technology was developed that can be used by decompressing 3D data compressed in the field. finally, it aims to supplement the technology experimentally developed in this study and conduct additional research to produce it as software that can be used in the excavation site and use it.

• Spatial Information Research
• /
• v.20 no.3
• /
• pp.83-93
• /
• 2012

Recent environmental concerns have made interest in environment-friendly transportation means such as walking, biking, and public transportation. However, since it is difficult to move long distance by walking or biking, their scope of application is rather limited. On the other hand, public transportation can solve traffic congestion, a recent social issue, though its usability may depend on its time schedule. Currently available information services on public transportation in the Web do not reflect well such traits of the public transportation; thus, in some cases, they may provide wrong information to end users. To solve such problems and provide information based on timetable of public transportations, this paper proposes a STP(Space Time Point) data model. Unlike existing space-time data models, this model recognizes the bottommost element of an object as a point and structures these points in hierarchical way to define an object. In particular, It can make it possible to implement a variety of dynamic spatial objects changing object information according to time. An objective of this study is to design a STP model for bus and subway based on timetables of public transportation in Daejeon area and builds a system to provide path navigation. With the designed navigation function, a path from the Daejeon National Cemetery to Hannam University was searched by time slot. The result showed that the system provided different paths by time, as the system guided different paths when bus operation was limited in midnight. As existing data model could not provide such results, it is confirmed that the system can provide path navigation based on real-time traffic information. It is expected that based on such functionality, it is possible to provide additional functionalities by applying diverse data models such as real-time transport information or traffic history information.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.3
• /
• pp.651-660
• /
• 2021

This study examined the trend of standards established in the United States and to find points that can be applied to Korean defense standards. The titles of various United States defense standard documents registered on the web were selected for this research. The wordcloud was created after analyzing the frequency of words appearing in the title using text mining. The trend of words appearing in MIL-STD by era was obtained. This study identified words that appear often due to the format of the document itself, words that appear regularly throughout the era, words that are used frequently in the past but are not used much in the present, and words that did not receive attention in the past but appeared recurrently in the present. In addition, the characteristics of each document were derived through the wordcloud produced for various defense documents. In conclusion, Korean defense standards also require a consideration of safe and efficient management, transport, and load design of hazardous materials. Furthermore, the quality of defense standards can be expected to improve if the defense standard document system can be established, focusing on efficient management.

• The Korean Journal of Air & Space Law and Policy
• /
• v.30 no.1
• /
• pp.207-244
• /
• 2015

Aviation safety is the stage in which the risk of harm to persons or of property damage is reduced to, and maintained at or below, an acceptable level through a continuing process of hazard identification and risk management. Many accidents and incidents have been taking place since 2014, while there had been relatively safer skies before 2014. International civil aviation community has been exerting great efforts to deal with these emerging issues, thus enhancing and ensuring safety throughout the world over the years. The Preamble of the Chicago Convention emphasizes safety and order of international air transport, and so many Articles in the Convention are related to the safety. Furthermore, most of the Annexes to the Convention are International Standards and Recommended Practices pertaining to the safety. In particular, Annex 19, which was promulgated in Nov. 2013, dealing with safety management system. ICAO, as law-making body, has Air Navigation Commission, Council, Assembly to deliberate and make decisions regarding safety issues. It is also implementing USOAP and USAP to supervise safety functions of member States. After MH 370 disappeared in 2014, ICAO is developing Global Tracking System whereby there should be no loophole in tracking the location of aircraft anywhere in world with the information provided by many stakeholders concerned. MH 17 accident drove ICAO to install web-based repository where information relating to the operation in conflict zones is provided and shared. In addition, ICAO has been initiating various solutions to emerging issues such as ebola outbreak and operation under extreme meteorological conditions. Considering the necessity of protection and sharing of safety data and information to enhance safety level, ICAO is now suggesting enhanced provisions to do so, and getting feedback from member States. It has been observed that ICAO has been approaching issues towards problem-solving from four different dimensions. First regarding time, it analyses past experiences and best practices, and make solutions in short, mid and long terms. Second, from space perspective, ICAO covers States, region and the world as a whole. Third, regarding stakeholders it consults with and hear from as many entities as it could, including airlines, airports, community, consumers, manufacturers, air traffic control centers, air navigation service providers, industry and insurers. Last not but least, in terms of regulatory changes, it identifies best practices, guidance materials and provisions which could become standards and recommended practices.