• Title/Summary/Keyword: wearing assessment

Search Result 102, Processing Time 0.024 seconds

A Comparative Analysis of Bilateral Hand Movement Using Accelerometer : A Pilot Study (가속도계를 이용한 양손 움직임 비교분석: 예비연구)

  • Lee, Joo-Hyun;Yang, No-Yul
    • Therapeutic Science for Rehabilitation
    • /
    • v.2 no.2
    • /
    • pp.61-66
    • /
    • 2013
  • Objective : The purpose of this study was to analysis of disparity between bilateral hand movement when performing activity of daily living using accelerometer. Methods : The subjects of this study included 6 healthy adults. The assessment tool used Jebsen Hand Function Test and accelerometer. The subjects performed 7 sub-tests after wearing accelerometer around wrist. Results : Among sub-tests, writing was the only significantly correlated with difference between dominant and non-dominant hand(t=-2.394, p<.05). Further, non-dominant hand (M=2476.2, SD=802.2) showed more movement than dominant hand(M=1456.2, SD=667.6). Conclusion : This results indicated that accelerometer is useful tool for assessment of bilateral hand movement. Considering demographic characteristics, various subject group, further study is needed.

Assessment of the Wear Comfort of Outdoorwear by ECG and EEG Analyses (아웃도어웨어의 착용 쾌적성 평가를 위한 심전도 및 뇌파 분석)

  • Jeong, Jeong-Rim;Kim, Hee-Eun
    • Journal of the Korean Society of Clothing and Textiles
    • /
    • v.33 no.10
    • /
    • pp.1665-1672
    • /
    • 2009
  • This study examines the comfort of outdoorwear by electrocardiogram (ECG) and electroencephalogram (EEG) analyses. An experiment that consisted of rest (30 min), exercise (30 min), and recovery (20 min) periods was administered in a climate chamber with 10 healthy male participants. Two kinds of outdoorwear made of 100% cotton fabrics ('Control') and specially engineered fabrics having the feature of quick sweat absorbency and high speed drying fabric ('Functional') are evaluated in the experiment. ECG and EEG signals were obtained during the rest and recovery periods for the two outdoorwear conditions. The ECG analysis identified a smaller decrement of high frequency (HF) power for the 'Functional' when compared with the 'Control' during the recovery period. Next, the EEG analysis showed that the relative band powers of slow $\alpha$ and mid $\alpha$ increased for the 'Functional' while they decreased for the 'Control' and that the ratio of $\alpha$ power to high $\beta$ power was higher for the 'Functional'. The evaluation results indicate that the participants could remain relaxed more with less stress while wearing the functional outdoorwear that demonstrated the positive effects on autonomic nervous system (ANS) activities. The present study is significant in regard that use of ECG and EEG for the assessment of wear comfort is the first in the field of clothing and textile.

Influence of Clothing Pressure on Blood Flow and Subjective Sensibility of Commercial Sports Compression Wear (시판 스포츠 컴프레션 웨어의 의복압이 혈류 및 주관적 감성에 미치는 영향)

  • Kim, Nam Yim;Lee, Hyojeong
    • Fashion & Textile Research Journal
    • /
    • v.21 no.4
    • /
    • pp.459-467
    • /
    • 2019
  • Compression wear provides clothing pressure and affects how blood flows. Facilitating a blood flow is one of the most important functions of compression wear. The wearer's sensibility should be considered when designing compression wear. This study instructed participants to put on 5 types of sport compression wear with different pressure levels (CP-1 to CP-5), measured clothing pressure, blood flow level, blood flow rate, and surface temperature, and examined the pressure level that influenced blood flow through a subjective sensibility assessment. An experiment measured the clothing pressure of compression wear available in the market and found that the pressure ranged 0.6-1.1 kPa for the ankle, 0.7-2.3 kPa for the calf, and 0.9-1.9 kPa for the thigh. Meanwhile, blood flow levels and rates significantly increased when participants wore CP-1, which had the highest clothing pressure level, and CP-2 and CP-4 with middle-level pressure. After exercise, CP-2's surface temperature was the highest and revealed that wearing CP-2 facilitated blood flow. CP-2 was evaluated as most positive in the sensibility assessment and showed a clothing pressure of 0.67-1.82 kPa; its pressure for the calf did not surpass 2.0 kPa. Considering positive physical effect of compression wear on blood flow and subjective psychological effect on participants, CP-2 (0.67-1.82 kPa) would have the most suitable clothing pressure level among other types of the wear in this study.

A Study on EMS Protective Gear Design and Its Effects for Elite Badminton Players with Knee Pain (무릎 통증이 있는 엘리트 배드민턴 선수를 위한 건식 E-textile 전극의 EMS(Electirc muscle stimulation) 보호대 설계 및 효과)

  • JuIl Lee;Jinhee Park;Jooyong Kim
    • Journal of Fashion Business
    • /
    • v.27 no.5
    • /
    • pp.93-107
    • /
    • 2023
  • This study aimed to design a knee brace with dry electrode EMS (Electrical Muscle Stimulation) for elite badminton players suffering from knee pain and assess its effectiveness in relieving pain and improving mobility. The assessment measured knee joint range of motion (ROM), Sargent jump height, and pain perception using a visual analog scale (VAS). Four experimental groups were established: stability, pain induction after 100 squats, muscle soreness induction with a regular knee brace, and muscle soreness induction with the EMS knee brace. The most suitable knee brace was selected from four samples to design the EMS knee brace. The conductive fabric was integrated into the inner surface of the knee brace to enhance EMS conductivity for the quadriceps muscles. Tensile strength tests showed that the dry electrode did not significantly affect the physical functionality of the knee brace.Regarding knee joint ROM and Sargent jump height, the EMS knee brace outperformed muscle soreness induction with a regular knee brace and wearing a standard knee brace. VAS measurements demonstrated that the EMS braces effectively alleviated pain perception in most cases. The results indicate the potential for developing EMS braces to alleviate pain and prevent injuries for athletes across various sports.

The Relationship Between Chewing Ability and Health Status in the Long-lived Elderly of Kyungpook Area (경북지역 장수노인의 저작능력과 건강상태)

  • Lee, Hee-Kyung;Lee, Young-Kwon
    • Journal of Yeungnam Medical Science
    • /
    • v.16 no.2
    • /
    • pp.200-207
    • /
    • 1999
  • Background: The objective of this study is to evaluate the effect of the dental and general health in relation to the state of dentition and chewing ability by surveying oral condition and anthropometric measure in order to provide primary statistics for the development of a program which may lead to an improvement in the long-lived elderly health status in a rural community. Materials and Methods: The subjects of this study were 97 rural long-lived elderly(27 males and 70 females) who were over 85 years-old (average age of subjects are $88.14{\pm}3.20$ year old) in Sungju-Gun, Kyungpook Province. Data were collected by using questionnaires and direct measurement of anthropometrics, and oral examination from all 97 subjects on July, 1999. Results: The following results were obtained: 1. 53.6% of all subjects believe that they are healthy. The average values of height, weight, BMI, body fat, lean body fat and total water were $148.8{\pm}11.2cm$, $46.9{\pm}10.5kg$, $21.2{\pm}3.5kg/m^2$, $26.7{\pm}6.9%$, $73.0{\pm}7.1%$, and $53.4{\pm}5.2%$, respectively. 2. The average number of teeth remaining in the subjects were $3.50{\pm}5.71$; the number of maxillary teeth remaining were $1.08{\pm}2.88$; and the number of mandibular teeth remaining were $2.41{\pm}3.76$. The maximum number of teeth remaining among subjects were 22 teeth, and the fully edentulous(no natural teeth) people were 76.3%. The oral conditions of the subjects were 52.6% using denture, 23.7% using natural teeth, and 23.7% masticating edentulous ridge without denture. 3. In terms of oral condition in self-assessment of health, digestive ability, and chewing ability ; On self-assessment of health, 47.1% of those wearing denture group responded as feeling good, 56.5% of those in the group of edentulous without denture, and 65.2% in group of natural teeth only. On self-assessment of digestive ability, 82.4% of those in group of denture responded as feeling good, 65.2% of those in group of no teeth and no denture, and 73.9% of those in group of natural teeth only. On self-assessment of chewing ability, 90.2% of those in the group wearing a denture, 60. 9% of those in the group of no teeth and no denture, and 65.2% of those in the group of natural teeth only. 4. In terms of oral condition in anthropometric measurements; The height, weight, body fat, lean body mass, and total water according to oral conditions were $150.0{\pm}10.7cm$, $49.0{\pm}10.9kg$, $26.9{\pm}6.6%$, $72.7{\pm}7.0%$, $53.2{\pm}5.1%$, respectively, in group wearing a denture, $142.7{\pm}6.0cm$, $43.2{\pm}5.5kg$, $29.5{\pm}7.2%$, $70.8{\pm}6.9%$, $51.8{\pm}5.0%$, respectively, in the group of no teeth and no denture, and $152.3{\pm}14.1cm$, $45.9{\pm}12.6kg$, $23.4{\pm}6.0%$, $75.9{\pm}6.9%$, $55.6{\pm}5.1%$, respectively, in the group of natural teeth only. Conclusion: The subjective measurements of good health were higher denture user, and natural teeth.

  • PDF

A Study on Middle & High School Girls’ Satisfaction and Appropriateness of the Current Sizing System for Their Fall and Winter School Uniform (중ㆍ고 여학생의 교복 만족도와 치수적합성에 관한 연구 - 동복을 중심으로 -)

  • 이혜주
    • Journal of the Korea Fashion and Costume Design Association
    • /
    • v.6 no.2
    • /
    • pp.21-33
    • /
    • 2004
  • The purpose of this study was to provide information on how to improve both the satisfaction and the current sizing system for the school uniform focused on middle and high school girls' students. For the satisfaction of their school uniform, there were statistical significance by the academic year in jacket design, blouse color, and skirt design in the case of middle school girls'. On the other hand, high school girls' evaluation of school uniform was significantly different in jacket color, jacket design, blouse color, textile of blouse, skirt color, and skirt design by the academic year. For the assessment of wearing motion, there was no significant difference by the grade in both middle school and high school girls'. However, it was shown more frequency of discomfort than that of comfort. For the evaluation of sizing fitness, the breadth of sleeve in jacket and the width of blouse were statistical significance in middle school girls' by the grade while the width of jacket, he breadth of sleeve in jacket, the length of blouse, the width of blouse and length of sleeve in blouse were different in high school students by the grade.

  • PDF

A Case Study on Manufacturing Processes for Virtual Garment Sample

  • Choi, Young Lim
    • Fashion & Textile Research Journal
    • /
    • v.19 no.5
    • /
    • pp.595-601
    • /
    • 2017
  • Advances in 3D garment simulation technology contribute greatly to consumers becoming more immersed in movies and games by realistically expressing the garments the characters in the movie or game are wearing. The fashion industry has reached a point where it needs to maximize efficiency in production and distribution to go beyond time and space in order to compete on the global market. The processes of design and product development in the fashion industry require countless hours of work and consume vast resources in terms of materials and energy to repeat sample production and assessment. Therefore, the design and product development tools and techniques must aim to reduce the sample making process. Therefore, this study aims to study a case for comparing the real garment sample making process to the virtual garment sample making process. In this study, we have analysed the differences between the real and virtual garment making processes by choosing designated patterns. As we can see from the study results, the real and virtual garments generally are made through similar processes in manufacturing, while the time consumed for each shows great variation. In real garment making, scissoring and sewing require the greatest number of work hours, whereas in virtual garment making, most of the time was spent in the simulation process.

A Study on the Development of Blouse Patterns for Obese Women in Their 20s and 30s (20~30대 비만 여성을 위한 블라우스 패턴 개발)

  • Jie, Fei;Nam, Young-Ran;Kim, Dong-Eun
    • Journal of the Korean Society of Clothing and Textiles
    • /
    • v.44 no.3
    • /
    • pp.464-484
    • /
    • 2020
  • This study examined obese women with a BMI index over than 25 kg/㎡ in their 20s and 30s regarding the right fit for wearing a blouse. In comparison with three types of existing educational patterns, the first educational pattern experimental clothing was produced in dimensions of three study participants selected by the existing pattern to evaluate the fit suitability conducted for groups of study participants and expert groups. Experimental patterns were designed based on educational pattern C, which was the best fit as a result of the fitting evaluation. The main modification items include front bust circumference, hip circumference, back interscye, scye depth, shoulder length, blouse length, bottom line shape, upper arm circumference, wrist circumference, sleeve length and collar size. The design preferences for obese women were reflected in pattern modification; in addition, the final experimental pattern was designed by adding or subtracting margins and dimensions based on the results of the visual matching assessment by study subjects and expert groups.

A Study on a Visual Image of Products-IIConcentrated on a type in purchasing behavior of consumer (제품의 시각이미지에 관한 고찰-II-생활자의 구매행동의 유형을 중심으로-)

  • 지해천
    • Archives of design research
    • /
    • v.2 no.1
    • /
    • pp.107-115
    • /
    • 1989
  • In my previous research (1986), I considered a general characteristics of a visual image of products. There were really many difficulties in designing all kinds of needs in compliance with the all of their requests in order to satisfy consumers. In addition, under the characteristics of goods, the consumers seem to choose an opti$$\mu$ com\ulcornerbinations after considering the combinations of trade-off. Therefore, this study that selected a watch as an object on this study was analyzed a Design Assessment Structure under the trade-off. As a result of this research: First, an effect of a negative superiority appeared under the trade-off condition among ifems when consumers purchased products. Second, these four items were extracted from the eight items which were suggested in this study through an analysis of factors. Third, the three courses were conformed when a consumer purchased a watch. Fourth, in the all kinds of goods, the price which was considered as an important point was not important item ina relation to a purchasing behavior. According to the concomitant effects, we figured out these four items, that is, form, thickness, readability and wearing and its have to be considered a lot when designing a watch.

  • PDF

Women's Uniform Shirts' Pattern Alteration by Applying the Work Postures of Flight Attendants (항공기 승무원의 작업 동작을 반영한 여성용 유니폼 셔츠 패턴 개선 방안)

  • Lee, Min-Ji;Chun, Jong-Suk
    • The Research Journal of the Costume Culture
    • /
    • v.19 no.5
    • /
    • pp.1019-1030
    • /
    • 2011
  • The aim of this study was to develop a pattern of flight attendant uniform shirts to provide better comfort for their work postures. Flight attendants' work postures were evaluated to determine the problems of clothing and mobility during their work. The pattern of the flight attendants' uniform shirt was altered by applying dynamic wearing ease(DWE). DWE was calculated from four standardized dynamic postures and a static posture. An experimental garment was made with the altered postures. The researcher redesigned the pattern of the uniform shirts, which minimizes physical limitations in movements. The fit and mobility of the shirts were evaluated. Results of this study are as follows. First, the five representative work postures were selected by "clothing stress" and "repetitiveness." These postures included raised arms, twisting midriff and shoulder postures. Five representative postures were selected by using the ergonomic posture assessment device index(OWAS). Second, the experimental garment was developed by applying DWE across the back and at armhole depth, back length, and side length. Third, the fit and mobility of the experimental garments and the original uniform shirts were compared at the flight working environment set and 5 dynamic body postures of raising arms. The experimental garments made with an altered pattern provided better fit and mobility than the original sample shirts.