• Fire Science and Engineering
• /
• v.33 no.6
• /
• pp.165-172
• /
• 2019

This study presents the design and manufacture of a self-contained breathing apparatus SCBA wireless communication module with a multipoint simultaneous full-duplex communication system to enable communication between team members wearing the SCBA system. It is necessary for fire-fighters to wear the SCBA system during extinguishing and rescue work at the fire site. Evaluation of the team communication module confirmed the feasibility of communication over more than 500 m in the test condition based on the line of sight. By implementing the Ad-hoc function, it was confirmed that the communication distance could be extended to 128 m by automatic routing up to 3 hoc. The vertical distance inside the building for successful communication was up to the 5th floor in the open staircase and up to the 3rd floor in the partitioned staircase. Furthermore, the performance testing of the communication module assuming a fire situation, confirmed that five team members correctly recognized the standard abbreviation of fire and wireless communication without a separate PTT key operation. In addition, the flame resistance was verified by exposing the module to a flame at 950 ± 50 ℃ for 5 s and then immediately extinguishing the flame.

• Journal of the Korea Convergence Society
• /
• v.11 no.4
• /
• pp.71-78
• /
• 2020

The purpose of this study is to investigate the effect of wearing clothes, Level B, and Level C PPE on normal CPR using mannequins. The paramedics who participated in this experiment were 20 paramedics with more than 5 years of experience in firefighting area C. It was found that chest compressions in the process that hand off time was 11.9 seconds in the uniform wearing group, 11.4 seconds in the level C PPE wearing group, and 13.1 seconds in the SCBA wearing group. In other words, wearing personal protective equipment prevents the movement of paramedics and uses compensatory movements, which may increase the difficulty of efficient first aid. If this situation persists, it may cause fatigue and damage to the body of paramedics. Rescue and paramedics should wear level personal protective equipment in case of emergencies and conduct rescue and CPR training.

• Journal of Environmental Health Sciences
• /
• v.42 no.6
• /
• pp.430-437
• /
• 2016

Objectives: The new Chemical Control Act from the Korean Ministry of Environment (2014-259) simply states only in basic phrases that every worker handling the listed chemicals should wear personal protective equipment (PPE) and does not consider the different hazard characteristics of particular chemicals or work types. The purpose of this study was to produce an exposure risk matrix and assign PPE to the categories of this matrix, which would be useful for revising the act to suggest PPE to suit work types or situations. Methods: An exposure risk matrix was made using hazard ranks of chemicals and workplace exposure risks in the previous study. For the 20 categories of exposure risk matrix PPE, levels A, B, C, D as classified by OSHA/EPA were assigned. After 69 hazardous chemicals were divided into 11 groups according to their physiochemical characteristics, respirators, chemical protective clothing (CPC), gloves and footwear were suggested on the basis of the assigned PPE levels. Results: PPE table sheets for the 11 groups were made on the basis of work types or situations. Full facepiece or half-mask for level C was recommended in accordance with the exposure risk matrix. Level A was, in particular, recommended for loading or unloading work. Level A PPE should be worn in an emergency involving hydrogen fluoride because of the number of recent related accidents in Korea. Conclusion: PPE assignment according to the exposure risk matrix made by chemical hazards and work type or situation was suggested for the first time. Each type of PPE was recommended for the grouped chemicals. The research will be usefully used for the revision of the Chemical Control Act in Korea.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.26 no.4
• /
• pp.477-482
• /
• 2010

In a case of multiple posterior teeth loss, antagonistic teeth extrude to the edentulous space and compensatory occlusion on the remained anterior teeth leads to occlusal trauma. Extrusion of antagonistic teeth breaks down occlusion plane and loss of posterior support bring about severe wear of remained teeth. In this situation, it is needed to restore remained teeth and edentulous space by increasing vertical dimension to obtain prosthodontic rehabilitation space and to correct occlusion plane. In this case report, the patient had a masticatory problem with loss of posterior teeth support and an esthetic problem of shortened anterior teeth. Before the tooth preparation for the prosthodontic restoration, the patient used removable device for 2 months to increase vertical dimension reversibly. After that, he got provisional fixed restoration with irreversible tooth reduction and used it for 3 months. It had spent 5 month to evaluate the adaptation state on final restoration with incresed vertical dimension. The increasing amount was 3 mm, which was relatively in less degree and masticatory system adapted to the increased vertical dimension without any pathologic changes. Final restoration was made to have equal-intensity contacts on all teeth in a verifiable centric relations and immediate disclusion of all posterior contacts the moment the mandible moves in any direction from centric relation. In addition, metal occlusion surface on posterior teeth was applied to prevent excessive muscle activation, occlusal trauma and the porcelain fracture.

• The Research Journal of the Costume Culture
• /
• v.11 no.2
• /
• pp.275-292
• /
• 2003

The purpose of this study is to recognize the aesthetic characteristics of the Maximalism depicted in contemporary costumes of new millennium. This is done by analyzing and examining the social and cultural background of fashion in the few years of 21st century. The fashion trend of the beginning of 21st century was coexisted conflicting factors with ultramodern factor and past recurrent factor. For that reason, new millennium is to be existence background of Maximalism style in contemporary costumes. The social and cultural background of Maximalism was regarded as characteristics of the Glocalism, fusion style, bobos. Glocalism means a compound word of Globalism and Localism, and used various fields of policy, economics, society etc. Consequently, the aesthetic formativeness of Maximalism of the contemporary costumes was investigated as the 'Romantic Hippie Look' and 'Romantic Sports Look' 1) Romantic Hippie Look New millennium fashion trend is affected by hippie style of 1970's. That is major reason that the antiwar consciousness of 9.11 terror, USA-Afganistan war and the economic depression is similar to 1970's situation. Accordingly, fashion trend is developed into bright, light, romantic style and fashion designers chose materials with flowers, butterflies, dragonflies pattern. Because the clothing of these material reflects well modern people's feeling to escape misgivings, unrest of political terror, war etc. The characteristics of hippie style expressed freedom as the greatest merit was raised new trend, so called 'Romantic Hippie Look' on new millennium. That is, the romantic hippie look of the contemporary costumes is depicted as the formative beauty of the multiculturalism and nationalism. 2) Romantic Sports Look : The beginning of new millennium, many fashion designers intend to graft the details of sports wear on order made or ready made clothing and try to show luxury and cheerful fashion design with combination of sporty and romantic factors. Accordingly, theses fashion trends expressed 'Romantic Sports Look' with a harmony or disharmony of unusual factors. The fashion trend of new millennium centering around special cities like New York, Paris, Milan moved to various regional culture. Accordingly, the features of fashion depicted not unique theme but multiplicity of the clothing of dissimilar style or material by the mixture of 2 or 3 factors like the fusion of femininity and masculinity and the combination of past and present of details. That is, the romantic sports look of the contemporary costumes is depicted as the formative beauty of the multi-functional and crossover.

• Restorative Dentistry and Endodontics
• /
• v.27 no.1
• /
• pp.16-23
• /
• 2002

Physical properties of composite resins such as strength, resistance to wear, discoloration, etc depend on the degree of conversion of the resin components. The purpose of this study was to evaluate the degree of conversion of the composite resins according to the thickness of tooth structure penetrated by light and applied light curing time. The coronal portions of extracted human teeth (one anterior tooth, three posterior tooth) was embedded by pink denture material. the mounted teeth were cut into three illumination sections (1mm thickness enamel section, 1mm thickness dentin section, 2mm thicknes dentin section) and one backing section with cutting wheel. Thin resin films were made by using 6kg pressure between slide glass during 5 minutes Thin resin film was light cured on coupled illumination section during 40sec, 80sec and 120sec. each illumination section was coupled as follows; no tooth structure(X), ename section(E), enamel section + 1mm dentin section(ED1), enamel section + 2mm dentin section(ED2), enamel section + 1mm dentin section + 2mm dentin section(EDD). To simulate the clinical situation more closely, thin resin films was cured against a backing section of tooth structure. The degree of conversion of carbon double bonds to single bonds in the resin films were examined by means of Fourier Transform Infrared Spectrometer. The results were obtained as follows ; 1 As curing time was increased, conversion rate was increased and as tooth thickness which was penetrated by curing light was increased, conversion rate was decreased. 2. At all tooth thickness groups, conversion rate between 80sec and 120sec was not significantly increased(P＞0.05). 3. At 40sec group and 80sec, conversion rate between no tooth structure(X) group and 1mm enamel section(E) group was not significantly decreased(P＞0.05). 4. At 80sec group and 120sec, conversion rate between 1mm enamel section(E) group and 1mm enamel section + 1mm dentin section(ED1) group was not significantly decreased(P＞0.05).

• Journal of the Korea Fashion and Costume Design Association
• /
• v.21 no.4
• /
• pp.43-54
• /
• 2019

This study analyzed the casula wearing by Catholic priests. By understanding various applications of the priests' wearing of casula, we can understand the meaning of wearing casula, situational judgment, and the role and status of priests. Ultimately, the Catholic symbol and meaning of the casula can be found. The purpose of this study is to examine the basic setting of the casula, the setting according to the status of the priest, and the origin of the casula. Second, this study to understand the design of the pattern shown in the casula. The patterns containing the symbol and the liturgical period were examined, and the method of making the pattern design was considered. Third, various symbols appearing in examples of priests' rituals were considered and analyzed. The method of this study was to utilize various pictures acquired during interviews with priests and nuns and to perform content verification. As a result of this study, the aspects of form, color, and pattern were shown through the wearing of casula during various situations. First, the morphological symbols appearing in the rituals are the simplified casula that hangs on the stola on the top of the alb and the symbols of the form according to the priest's status. In the liturgy, the casula is put on the outermost side as for basic wearing, but in the case of celebration or the attendance at celebrations other than the liturgy, it is the same as simplified wearing. Second, in terms of the symbol and color, the basic colored casulas were worn to match the time and character of the liturgy, and in addition, on the priests' ordination ceremony and celebration day the priests wore white casulas. Third, the symbol of the pattern used in the casula was a Cathoric pattern according to the period in the basic casula wearing of the liturgy. In addition, the patterns were produced by combining the patterns and meaning of the priests that were used in the casulas of the priests' ordination ceremony. The design of the pattern used in the beatification mass casula and the Mass of Peace casula during the Pope's visit to Korea in 2014 used the same motif as the Pope's design, but the simplified pattern was produced for the casula of the Cardinal and bishops. Through this, it is possible to understand the situation where a morphological symbol appears due to a distinction according to the role and status of the priest. This shows that the symbols that appear are the cross and should also consider the complexly, shape, color, and pattern.

• The Journal of Korean Academy of Prosthodontics
• /
• v.41 no.2
• /
• pp.128-135
• /
• 2003

Statement of problem : Implant screw loosening remains a problem in implant prosthodontics. Some abutment screws with treated surfaces were introduced to prevent screw loosening and to increase preload. DLC(Diamond Like Carbon) film has similar properties on hardness, wear resistance, chemical stability, biocompatibility as real diamond materials. Purpose : The purpose of this study was to investigate the effect of lubricant layer on abutment screw and to discriminate more effective method between soft lubricant and hard lubricant to prevent screw loosening. Material and method : In this study, $1{\mu}m$ thickness DLC was used as protective, lubricating layer of titanium screws and 3 times removal torque was measured on the abutment screws to investigate the difference in 10 coated and 10 non-coated abutment screws. Results : The results indicated that the implants with DLC coating group were not more resistant to the applied force in screw loosening. At 32Ncm, the 3 times removal torque in DLC group were $27.75{\pm}2.89,\;25.85{\pm}2.35$ and $26.2{\pm}2.57$. The removal torque in no-coated abutment screws were $27.85{\pm}4.23,\;27.35{\pm}2.81$ and $27.9{\pm}2.31$, respectively. Conclusion : The lubricant layer used in this study was Diamond Like Carbon(DLC) and it have a properties of hard and stable layer. The DLC coating layer was hard enough to prevent distortion of screws in the repeated unscrewing procedure in clinical situation. The reduced friction coefficient in hard DLC layer was not effective to prevent screw loosening.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.21 no.4
• /
• pp.545-560
• /
• 2019

During EPB TBM tunnelling, an appropriate application of additives such as foam and polymer is an essential factor to secure the stability of TBM as well as tunnelling performance. From the '90s, there have been many studies on the optimal injection of additives worldwidely contrary to the domestic situation. Therefore, in this paper, the foam, which is widely adopted for soil conditioning, was selected as an additive in order to investigate the effect of foam injection on TBM performance through a series of laboratory excavation tests. The excavation experiments were carried out on artificial sandy soil specimens with consideration of the variance of FIR (Foam Injection Ratio), FER (Foam Expansion Ratio) and $C_f$ (Surfactant Concentration), which indicate the amount and quality of the foam. During the tests, torque values were measured, and the workability of conditioned soil was evaluated by comparing the slump values of muck after each experiment. In addition, a weight loss of the replaceable aluminum cutter bits installed on the blade was measured to estimate the degree of abrasion. Finally, the foam injection ratio for the optimal TBM excavation for the typical soil specimen was determined by comparing the measured torque, slump value and abrasion. Note that the foam injection conditions satisfying the appropriate level of machine load, mechanical wear and workability are essential in the EPB TBM operational design.

• Korean Journal of Heritage: History & Science
• /
• v.47 no.3
• /
• pp.160-171
• /
• 2014

The provision of support for the art of making these items needs to be considered with the focus on the following factors: the local situation of the areas where such traditional handicrafts are still made, the craftspeople involved in their production, and their communities. So far, discussion about how to reinvigorate traditional handicrafts, including those mentioned above, has been concentrated on the measures taken to promote them as part of the handicrafts industry and the allocation of the government's budget for important intangible cultural heritages. The government runs a traditional handicrafts management system and provides financial support for the craftspeople and spaces for exhibiting their work. This form of support has led to systematic management of traditional handicrafts and heightened public interest in cultural heritage, as well as publicizing the country's traditional crafts, but has made little progress in the following areas: the fostering of young people willing to learn traditional skills, diversification of the types of skills to be maintained, or establishment of the networks of collaboration among the craftspeople. The most important aspect among the efforts mentioned above is to maintain cultural traditions that are unique to each region by encouraging local craftspeople to engage in their work with a solid sense of pride backed up by financial support. This study was carried out in connection with the need to reinvigorate the art of making tanggeon (horsehair crown), manggeon (horsehair headband), and gat (black horsehair hat), which few people wear as they are used only for ornamental purposes nowadays. This study examined the circumstances surrounding the artisans engaged in the production of horsehair handicrafts prior to their designation as a cultural heritage, and the changes that occurred in the local communities associated with their production after the designation, in order to assess the status of inheritance of this tradition.