• 소성∙가공
• /
• 제6권2호
• /
• pp.161-175
• /
• 1997

The effects of various process paramenters on the detailed aspects of the thermo-mechanical behavior of work roll and on the roll life are investigated via a series of process simulation, using a mathematical model presented previously. The process conditions are discussed that are favorable or optimal in terms of reducing roll wear in the front finishing stands.

• 한국정밀공학회지
• /
• 제20권10호
• /
• pp.56-64
• /
• 2003

The effect of tool geometry on the tool wear in turning the austenitic stainless steel, STS 304 was investigated. The wear of TiN-TiCN-TiC-TiAlN coated tungsten carbide tool was the smallest, showing larger wear in the order of Si-Al-O-N ceramic, TiN coated tungsten carbide, TiN- TiCN- TiN coated tungsten carbide, TiC-TiN cermet and M20 tungsten carbide tools at the same cutting conditions. The S-type tool of M20 with the larger side cutting edge angle showed the smallest tool wear in all tests due to preventing the groove wear of the side cutting edge. The wear of the S-type tool with the rake angle of $15^{\circ}$ became smaller than with that of $-5^{\circ}$, but the tool with the nose radius of 0.8mm did not perform much better with increasing the rake angle.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1997년도 제26회 추계학술대회
• /
• pp.86-92
• /
• 1997

When Lubricants is used under severe running condition, tribological characteristics is very important. I have studied the lubricating oil viscosity, kinds of additives and lubricating oil temperatures were changed. In order to study the effect of oil temperature on the wear of the surface, the temperature of the oil was changed for the same sample. Moreover, the temperatures of three kinds of oils which have very different viscosities at room temperature, were varied while the oil viscosity was unchanged. It was shown from the test results that wear is not greatly affected by the amount of ZnDTP antiwear agent, but E-P additives are less effective against wear than ZnDTP additives. The viscosity of lubricating oil and its tempea-ature greatly affect the wear of the surface. Combining all the wear data with those of the surface strength, it was observed that the higher the load, the lower the scratch of wear, and also in the case of the same running load, the lower the wear, the longer the life of the surface strength.

• 한국생산제조학회지
• /
• 제8권6호
• /
• pp.71-77
• /
• 1999

Monitoring of Cutting tool wear is a critical issue in automated machining system and has been extensively studied for many years. An austempered ductile iron(ADI) exhibits the excellent mechanical properties and the wear resistance. ADI has generally the poor machinability due to the characteristic. This paper presents the in-process detection of flank wear of cutting tools using the acoustic emission sensor and the digital oscilloscope. The amplitude level of AE signal(AErms) is mainly affected by cutting speed and it is proportional to cutting speed. There have been the relationship of direct proportion between the amplitude level of AE signals and the flank wear width of cutting tool. The flank wear with corresponding to the tool life is successfully detected with the monitor-ing system used in this study.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.74-79
• /
• 1996

The wear of partially coated pinion cutters under several cutting conditions was studied. In the realm of this experiment, chipping was a dominant tool wear mechanism and flank wear was much larger than crater wear. Under the condition of relatively low rotary feed and low radial feed rate, the wear due to chipping was concentrated at the nose part of pinion cutter. Increasing of rotary feed and radial feed rate alleviated the concentration of chipping at nose and prolonged tool life.

• 한국의류산업학회지
• /
• 제15권3호
• /
• pp.364-370
• /
• 2013

This research helps secure the safety of snow boarders in an activity that is currently recognized as a minor specific hobby. The research goal is to develop a new board wear product with intensified safety and activity through the development of a safe and convenient snowboard wear that is wearable in ordinary life. The participants consisted of 31 snowboard club members evaluated from January 12 to January 19 at Eden-valley Ski Resort and Phoenix-park Resort in Korea. The result are as follows. First, what domestic snowboard wear consumers consider design difference and brand recognition a significant priority in choosing snowboard wear versus the functionality or safety of clothes. Second, concerning the evaluation of the developed product, they recognize the necessity of safety gear; however, they demand the convenient use of a safety gear with a fixation that can be attached and detached. A unity-type board wear was developed that enables an attachment and detachment that reflects the evaluation results. In conclusion, this research showed various market possibility of board wear into sports casual wear to be able to make it a fashion product through different design and demand of mixing it with general wear rather than functionality or activity, though board wear is a professional sports wear.

• 한국의류학회지
• /
• 제21권1호
• /
• pp.82-92
• /
• 1997

The purpose of this study is to segment an infant's wear market on the base of housewife's fashion life-style for satisfaction of varied needs and high efficiency of marketing activity. This study was used 183 questionnaires (20∼30 generation housewife in Seoul) for statistical analysis. This study was used factor analysis and cluster analysis to group same respondents and frequency analysis, x2_analysis, ANOVA, duncan-test to analyze characteristics of demographics, clothing purchase pattern for each segmented group. The respondents were divided into 4 groups of differnt housewife's fashion life-style matte tons according to the results of analysis. The findings of the research on each groups are summarized as follows: 1) Subdividing market was classified such as a fashion-seeking/shoping-oriented group, personality-seeking group, practical/planning group, traditional conservative group. 2) According to characteristics of demographics in Subdividing market, there were significant difference in their school career, family monthly income, existence of job. 3) According to clothing purchase pattern in Subdividing market, there were significant difference in housewife's fashion life-style. But there were only partly significant difference in characteristics of demographics. In this study, housewife's fashion life-style segmentation in infant's wear market has purpose that marketing managers are given these infornations and various wants of consumers can be satisfied.

• Nuclear Engineering and Technology
• /
• 제35권5호
• /
• pp.442-453
• /
• 2003

This study investigates the safety assessment of the potential for fretting-wear damages on steam generator (SG) U-tubes caused by foreign object in operating nuclear power plants. The operating SG shell-side flow field conditions are obtained from three-dimensional SG flow calculation using the ATHOS3 code. Modal analyses are performed for the finite element modelings of U-tubes to get the natural frequency, corresponding mode shape and participation factor. The wear rate of U-tube caused by foreign object is calculated using the Archard formula and the remaining life of the tube is predicted. Also, discussed in this study is the effect of the flow velocity and vibration of the tube on the remaining life of the tube.

• 한국생산제조학회지
• /
• 제6권4호
• /
• pp.124-129
• /
• 1997

The experimental investigation is mainly focused to detect tool wear by cutting signal measurements in multi-insert face milling SS 41 and STS 304. This research have investigated the effects on the insert number, which has relationship with mean-cutting force. AE(acoustic emission) signal, tool life and surface roughness in machining SS41 and STS 304. The cutting force and AE signal are monitored to analyse the cutting process, The surface roughness of the specimens machined by TiN coated tool with the various insert numbers measured at various cutting speeds, feed rates and depths of cut, The width of flank wear is also observed.

• 한국생산제조학회지
• /
• 제6권1호
• /
• pp.69-76
• /
• 1997

This paper deals with the machinability based on turning and drilling tests. The main conclusions obtained were as follows. (1) Turning : The roughness of Machined surface decreases with the increase of the rake angle of tools, and the tool wear becomes smaller with the decrease of the rake angle. When the feed rate becomes larger, the fracture of work material in the vicinity of the cutting edge occurs on a larger scale, eventually decreasing tool wear. (2) Drilling : Considering both tool life and productivity, it is reasonable to cut with the high cutting speed and feed rate. The tool wear increases with the increase of feed rate, and the tendency of feed rate on tool wear becomes stronger at the cutting speed $\geq$30m/min.