Machinability of Sintered Carbon

탄소 소결체의 피절삭성

  • 김성청 (충북대학교 정밀기계공학과)
  • Published : 1997.03.01

Abstract

This paper deals with the machinability based on turning and drilling tests. The main conclusions obtained were as follows. (1) Turning : The roughness of Machined surface decreases with the increase of the rake angle of tools, and the tool wear becomes smaller with the decrease of the rake angle. When the feed rate becomes larger, the fracture of work material in the vicinity of the cutting edge occurs on a larger scale, eventually decreasing tool wear. (2) Drilling : Considering both tool life and productivity, it is reasonable to cut with the high cutting speed and feed rate. The tool wear increases with the increase of feed rate, and the tendency of feed rate on tool wear becomes stronger at the cutting speed $\geq$30m/min.

Keywords

References

  1. Physics of Graphite B. T. Kelly
  2. Fundamentals of Carbon Materials M. Inagaki
  3. Wear v.169 Failure of tungstencarbide-cobalt alloy tolls in machining of carbon materials M. Masuda;Y. Kurochoima;Yoshiteru Chujo
  4. Wear v.195 The machinability of sintered carbons based on the correlation between tool wear rate and physical and mechanical properties M. Masuda;Y. Kuroshima;Yoshiteru Chujo
  5. 精密工學會誌 v.54 no.9 高硬度炭素燒結體の切削に關する硏究 田中武司;井川直哉;黑島泰辛;岩田弘;眞鎬貞弘 高硬度炭素燒結體の切削に關する硏究
  6. 精密工學會誌 v.53 no.12 炭素燒結體の被削性(第1報);工具壽命と工具磨耗の特性 黑島泰辛;岩田弘;眞鎬貞弘
  7. 精密工學會誌 v.54 no.12 炭素燒結體の被削性(第2報);切りくず生成機構と工具壽命 黑島泰辛;岩田弘;眞鎬貞弘
  8. 精密工學會誌 v.59 no.9 炭素燒結體の被削性(第3報);工具損傷に及ばす黑鉛化溫度 黑島泰辛;岩田弘;眞鎬貞弘
  9. 精密工學會地 v.61 no.3 炭素燒結體の被削性(第4報);セラミックス工具の切削性能と磨耗特性 黑島泰辛;岩田弘;眞鎬貞弘
  10. 昭和1986年精密工學會春季大會學術講演會講演論文集 CBN工具磨耗機構 布施久康
  11. 日本機械學會論文集 v.31 no.225 黑鉛の切削における工具磨耗とねの速度特性 竹山秀彦