• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2004년도 춘계 학술발표대회 개요집
• /
• pp.75-77
• /
• 2004

Microstructure and mechanical property of In48Sn solder on electrolytic Au/Ni/Cu BGA substrate were investigated with the number of reflows. AuIn and AuIn$_2$ IMCs were formed at the interface solder and pad after 1reflow. An increase of the number of reflows changed AuIn into AuIn$_2$. AuIn$_2$ IMC layer at the interface broke and spalled away into the solder after 3reflows. Shear force decreased with the number of reflows because the weakness of the interface by the spalling of AuIn$_2$ IMC layer.

• 제어로봇시스템학회논문지
• /
• 제10권8호
• /
• pp.734-741
• /
• 2004

This paper presents a network based fire detection system using CAN, in order to evaluate feasibility of home automation protocol for smart home. In general, because a traditional fire detection system has an analog transmission method with 4-20mA current, it has several shortcomings such as weakness to noise. Hence, as an alternative to the traditional system, this paper presents the architecture of CAN based fire detection system and the design method of CAN communication network. Also, the performance of the suggested system is evaluated through an experimental testbed. Especially, CAN has several advantages such as low cost and easiness of implementation compared to Ethernet or ARCNET, which are low layer of BACNet. Therefore, if CAN is adopted as low layer of BACNet, the home automation system is implemented more effectively.

• IEIE Transactions on Smart Processing and Computing
• /
• 제3권2호
• /
• pp.65-73
• /
• 2014

An overall responding security-centered framework is necessary required for infringement accidents, failures, and cyber threats. On the other hand, the correspondence structures of existing administrative, technical, physical security have weakness in a system responding to complex attacks because each step is performed independently. This study will recognize all internal and external users as a potentially threatening element. To perform connectivity analysis regarding an action, an intelligent convergence security framework and road map is suggested. A suggested convergence security framework was constructed to be independent of an automatic framework, such as the conventional single solution for the priority defense system of APT of the latest attack type, which makes continuous reputational attacks to achieve its goals. This study suggested the next generation convergence security framework to have preemptive responses, possibly against an APT attack, consisting of the following five hierarchical layers: domain security, domain connection, action visibility, action control, and convergence correspondence. In the domain, the connection layer suggests a security instruction and direction in the domains of administrative, physical and technical security. The domain security layer has consistency of status information among the security domain. A visibility layer of an intelligent attack action consists of data gathering, comparison and decision cycle. The action control layer is a layer that controls the visibility action. Finally, the convergence corresponding layer suggests a corresponding system of before and after an APT attack. The administrative security domain had a security design based on organization, rule, process, and paper information. The physical security domain is designed to separate into a control layer and facility according to the threats of the control impossible and control possible. Each domain action executes visible and control steps, and is designed to have flexibility regarding security environmental changes. In this study, the framework to address an APT attack and load map will be used as an infrastructure corresponding to the next generation security.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 봄 학술발표회 논문집
• /
• pp.101-110
• /
• 2002

This article summarises the traditional method of soil-structure interaction based on the modulus of subgrade reaction and shows its weakness. In order to avoid these weakness, a new soil-structure interaction model is proposed. This model considers the soil as a set of connected springs which enables interaction between springs. Its use is as simple as the traditional model but allows to define the soil properties independently from the structural properties and the loading conditions. Thus, the definition of the modulus of subgrade reaction is unnecessary as each component is defined by its own modulii (Young's modulus and shear modulus). The non-linear soil behaviour for the shear stress versus distortion is also incorporated in the model. This feature allows to pinpoint the arching effect in the ground and shows how the stresses concentrate on stiff materials. Based on these principles, three dimensional program has been developed in order to solve the difficult problem of soil improvement by inclusions (stiff or soft). Also the possibility to take into account a flexible mat and/or a subgrade layer has been implemented. Equations used in the model are developed and a parametric study of the necessary data used in the program is presented. In particular, the Westergaard modulus notion and the arching effect are analysed.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제17권1호
• /
• pp.165-184
• /
• 2023

The ARX-based lightweight block cipher is widely used in resource-constrained IoT devices due to fast and simple operation of software and hardware platforms. However, there are three weaknesses to ARX-based lightweight block ciphers. Firstly, only half of the data can be changed in one round. Secondly, traditional ARX-based lightweight block ciphers are static structures, which provide limited security. Thirdly, it has poor diffusion when the initial plaintext and key are all 0 or all 1. This paper proposes a new dynamic ARX-based lightweight block cipher to overcome these weaknesses, called DABC. DABC can change all data in one round, which overcomes the first weakness. This paper combines the key and the generalized two-dimensional cat map to construct a dynamic permutation layer P1, which improves the uncertainty between different rounds of DABC. The non-linear component of the round function alternately uses NAND gate and AND gate to increase the complexity of the attack, which overcomes the third weakness. Meanwhile, this paper proposes the round-based architecture of DABC and conducted ASIC and FPGA implementation. The hardware results show that DABC has less hardware resource and high throughput. Finally, the safety evaluation results show that DABC has a good avalanche effect and security.

• 한국가금학회지
• /
• 제30권1호
• /
• pp.55-59
• /
• 2003

경기도 소재 산란종계 농장에서 심한 운동실조와 급격한 폐사율 증가 등의 임상증상이 발현되어 국립수의과학검역원 조류질병과에 38주령 닭 15수가 질병진단을 목적으로 의뢰되어 병리해부검사, 조직검사, 임상병리 검사를 실시한 결과 아래와 같은 결과를 얻을 수 있었다. 각 1만수씩 입식된 3개 계군의 폐사율은 17.7％(A동), 12.3％(B동), 21.1％(C동)이었으며 폐사 직전 닭들의 특이적인 임상증상으로는 침울, 식욕결핍, 다리마비, 기립불능 등이 관찰되었다. 병리해부검사상에서는 대퇴부와 다리부위 골격근의 변성과 괴사로 변색, 긴장도 상실, 연화 등이 확인되었다. 조직검사 결과 근섬유의 괴사와 함께 심한 염증세포의 침윤이 특징적인 괴사성 근증이 관찰되었다. 또한 혈청내 creatine kinase, asparte aminotransferase, akaline phosphatase 농도검사에서도 정상적인 조류의 범위보다 2배 이상 상승된 농도가 확인되어 간접적으로 괴사성 근증임을 확인할 수 있었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.416-419
• /
• 2002

There are being two prominent studying for Digital Radiography. Direct and Indirect method of Digital Radiography are announced for producing high quality digital image. The one is using amorphous selenium as photoconductor and the other is using phosphor layer as a light conversion. But each two systems have strength and weakness such as high voltage and blurring effect. In this study, we investigated the electrical characteristic of $multi-layer\left(CaWO_{4}+a-Se \right)$ as a photoconductor according to the changing arsenic composition ratio. This is a basic research for developing of Hybrid digital radiography which is a new type X-ray detector. The arsenic composition ratio of a-Se compound is classified into 7 different kinds which have 0.1%, 0.3%, 0.5%, 1%, 1.5%, 5%, 10% and were made test sample throught thermo-evaporation. The phosphor layer of $CaWO_4$ was overlapped on a-Se using EFIRON optical adhesives. We measured the dark and photo current about the test sample and compared the electrical characteristic of the net charge and signal-to-noise ratio. Among other things, test sample of compound material of 0.3% arsenic showed good characteristic of $2.45nA/cm^2$ dark current and $357.19pC/cm^2/mR$ net charge at $3V/{\mu}m$.

• 한국정밀공학회지
• /
• 제25권11호
• /
• pp.126-133
• /
• 2008

Rapid Prototyping (RP) has been widely used for rapid development of prototypes in various industrial fields. In recent years, a new requirement in RP industry has issued so as to directly manufacture a functional prototype which has enough mechanical properties to be used as a functional part. The RP prototype, however, has a limitation in mechanical properties due to its layer-by-layer manufacturing process. This manufacturing process results in anisotropy of the prototype, especially showing weakness in the building direction. In the present work, we performed tensile tests for RP prototypes in order to determine directional mechanical properties. The test specimens were made by using $Eden330^{TM}$ by Object Geometries Ltd. Finite element analyses considering material anisotropy were then carried out for RP prototypes with various building directions. Effect of the building direction on the mechanical strength was investigated through the analysis, and compared with experimental results.

• Journal of Communications and Networks
• /
• 제12권3호
• /
• pp.275-284
• /
• 2010

The current multihome-aware protocols (like stream control transmission protocol (SCTP) or parallel TCP for concurrent multipath data transfer (CMT) are not designed for high-capacity and large-latency networks; they often have performance problems transferring large data files over shared long-distance wide area networks. It has been shown that SCTP-CMT is more sensitive to receive buffer (rbuf) constraints, and this rbuf-blocking problem causes considerable throughput loss when multiple paths are used simultaneously. In this research paper, we demonstrate the weakness of SCTP-CMT rbuf constraints, and we then identify that rbuf-blocking problem in SCTP multihoming is mostly due to its loss-based nature for detecting network congestion. We present a simulation-based performance comparison of FAST TCP versus SCTP in high-speed networks for solving a number of throughput issues. This work proposes an end-to-end transport layer protocol (i.e., FAST TCP multihoming as a reliable, delaybased, multihome-aware, and selective ACK-based transport protocol), which can transfer data between a multihomed source and destination hosts through multiple paths simultaneously. Through extensive ns-2 simulations, we show that FAST TCP multihoming achieves the desired goals under a variety of network conditions. The experimental results and survey presented in this research also provide an insight on design decisions for the future high-speed multihomed transport layer protocols.

• 한국표면공학회지
• /
• 제30권2호
• /
• pp.93-103
• /
• 1997

High temperature materials used in the elevated temperature and corrosive atmosphere must have the good oxidation resistance and preserve their own mechanical properties simultaneously. For the oxidation resistance, it is very important to form a protective oxide scale such as $Al_2O_3$ or $Cr_2O_3$ on the substrate. However, the additions of protective oxide forming elements such as Cr and Al in the alloy to enhance its oxidation resistance are limited due to the deleterious effects on their mechanical properties. PECVD(P1asma Enhanced Chemical Vapor Deposition) coating processes were employed to improve the oxidation resistance at high temperature. Cr and/or A1 were coated on the substrates of Ni and Inconel 600 at various temperatures of 400, 500, $600^{\circ}C$ and at different conditions of specimen surfaces. Then, coated specimens were exposed to isothermal and cyclic oxidation conditions in air at 1000 and $1100^{\circ}C$. In order to enhance the adhesion between the substrate and coated layer, heat treatments of the coated specimens were conducted in a vacuum. At isothermal oxidation experiments, Al-coated Ni specimen showed better oxidation resistance than pure Ni. At cyclic oxidation experiments at $1000^{\circ}C$. Cr and Al-coated specimen showed better oxidation resistance. Cr-coated Inconel 600 had also showed better oxidation resistance due to Cr in the substrate. By PECVD coating process, oxidation resistance could be improved, but it was not improved as expected due to the weakness of the adhesion between the substrate and the coated layer.