• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.1324-1333
• /
• 2010

This paper is used in a recent civil engineering field in three-dimensional laser-meter tiles using thermal imaging cameras for the weathered rock slopes precisely measured indirectly, to the degree that began in the will. In the field is difficult to access the degree of weathering of the rock slope to the existing direct way to compensate for the shortcomings of 3D Terrestrial Laser Scanner and weathering characteristics of rocks using thermal imaging cameras to get the information to analyze the degree of rock weathering is. Intensity of 3D TLS and the thermal camera with image analysis to analyze the degree of weathering of bedrock in the field of core drilling targeting indoor laboratory tests were analyzed through the study. Granite, gneiss, sandstone, much of the cancerous samples, each experiment has a 40 per category, each of which 30 were used to analyze the data collected. That degree of rock weathering, the rock, depending on the strength of the Intensity values can change, depending on the level of thermal imaging camera, also weathered the changes in temperature could see. Intensity is the strength of weak rocks, the more value decrease, the temperature of the thermal imaging camera through the swell Intensity and notice that the temperature had an inverse relationship. Intensity value of the low strength of weak rock, but the value came out of the rocks have been proved to be largely dependent on the contrast. The contrast of the surface rocks are weathered dark Intensity values lower temperature to swell the contrary, the degree of weathering can be distinguished.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 지반공학 공동 학술발표회
• /
• pp.285-289
• /
• 2005

The Cenozoic Era consists of two period , the Tertiary and the Quaternary Period. Weak rock types may include areas containing: 1) poorly cemented or uncemented sediments, 2) highly weathered rock, or 3) fault lines. Especially this paper deal with poorly cemented or uncemented sedimentary rocks in slope. Mechanical weathering is caused by physical processes such as absorption and release of water, and changes in temperature and stress at or near the exposed rock surface. It results in the opening of discontinuities, the formation of new discontinuities by rock fracture, the opening of grain boundaries, and the fracture or cleavage of individual mineral grains. Decomposition causes some silicate minerals such as feldspars to change to clay minerals. There was a strong negative correlation between water absorption and important engineering properties such as strength and durability.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 봄 학술발표회 논문집
• /
• pp.85-92
• /
• 2003

Generally, ordinary portland cement(OPC) is widely used for grouting to reduce permeability of ground under the foundations of structures. But, it is hard to be injected into the microscopic voids, fissures and crevices in soil or rock formation for the OPC material. Therefore new method what is called MSG(Micro Silica Grouting) has been developed recently to improve the weak point of the OPC material. In this case study, in order to verify performance of the MSG's water cut-off, trial injections were performed in rear of CIP(Cast in Place Pile) on the site A(weathered soil) and B(alluvial soil) that are constructed for the subway No. 9 nowadays. To take the proper grouting method of the MSG in the trial injecting, the injections are carried out for grouting types(constant pressure or fixed Quantity) and grouting methods(1.5shot or 2.0shot) and to confirm the effects of water cut-off and the injection range of the MSG, the tests of permeability and indicator(phenolphthalein) response were performed before and after the injection. Through the tests results, we could affirm the effects of water cut-off of the MSG and the injection range for the weathered and alluvial soil layers near the Han River. Finally we could make sure the application of the MSG method in actual construction under the layers.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 추계 학술발표회
• /
• pp.539-550
• /
• 2006

New Songdo city is currently developing on the reclaimed land on a marine deposit and among the development the four sixty-four(64) stories high rise buildings are under construction at block 125. The ground condition of the site is comprised of a deep seated weathered rock staratum under a soft marine deposit layer. As a foundation system, a bored pile was planned to transmit the applied load to the stable layer. In this study, the behavior of the weathered rock especially locating at a upper part having a weak strength(HWR, MWR) has been evaluated through series of hi-directional pile load test(BD PLT) carried out on the 3 drilled shafts socketed in a weathered rock layer in a design stage. It has been planned to increase the effect of the tests that the length of test piles was prepared short enough to perform the test under a high stress. The summary of the design reflecting the test results has been made up. In addition, the 4 hi-directional pile tests excuted on the working piles during the construction stage for the purpose of confirmation and the evaluation of the adequacy of the pile behaviors have been included in this study.

• 한국지반공학회지:지반
• /
• 제9권1호
• /
• pp.59-68
• /
• 1993

In deep excavations for creation of underground spaces, it would be difficult to predict earth pressure, especially multilayered ground including rock strata. The earth pressures and displacements on the retention walls are measured by load cell, strain gauge and inclinometer which were installed at struts or anchors at 4 deep excavation sites in Seoul area. In this paper, the measured earth pressure from the struts or anchors are compared with Peck's empirical values, and the coefficient of the earth pressures for each strata and horizontal wall displacement are investigated. The coefficient of earth pressure distribution, a(0.65zka), in the flexible and the rigid walls was about 74% and 88% of Peck's value respecitively. The measured earth pressure distributions for the 4 sites showed about 70%∼80% of Peck's empirical values and the average earth pressure coefficients based on the measured data were 0.3 for the felted layer, 0.23 for the weathered rock and 0.19 for the weak rock. The maximum w리1 displacements were found to be less 0.2% of excavation depth.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 봄 학술발표회 논문집
• /
• pp.157-164
• /
• 2002

Based on the results of prototype air-shaft construction, penetration capacity of RBM(Raise Boring Machine) was analyzed and compared with TBM(Tunnel Boring Machine) performance in this study. Utilization, down time, net penetration rate and advance rate were evaluated and compared. By conducting the laboratory tests for rock properties with the analysis of penetration capacity, relation of penetration capacity and geotechnical parameters was studied. The results showed that much more higher value of utilization, however lower value of net penetration rate for RBM was obtained compared to those of TBM. In addition, as the strength of rock penetrated increased, higher value of net penetration rate was obtained contrarily to the results of TBM performance. Finally, new relationship between total hardness and net penetration rate for weak and weathered rock was derived from these results.

• 터널과지하공간
• /
• 제21권3호
• /
• pp.181-191
• /
• 2011

단층대, 파쇄대 또는 풍화대가 발달한 암반은 실내시험을 위한 시료 성형이 어렵다. 기존에 현장에서 수행된 직접전단시험은 갱도 내벽의 수직반력을 이용하여 수행되었다. 이 연구에서 개발된 현장직접전단시험기는 터널내부 또는 노천의 현장상태 암반에서 시험을 수행할 수 있다. 현장직접전단시험기의 주요 구성은 전단하중 반력판 및 하중전달판, 유압실린더 시스템, 로드셀, 다단계 전단상자, 전단상자 고정장치, 수직하중 반력판 및 하중전달판, 마찰저항 감소용 롤러 등이다. 공시체는 각주형의 블록으로 최대 크기는 $400{\times}400{\times}460$ mm이며 현장에서 형성하는 방법 및 절차가 제시되었다. 개발된 시험기의 현장적용성 평가를 위하여 연구지역에 대한 지질공학적 조사 분석 연구를 통하여 성능시험을 위한 공시체 형성에 적합한 위치가 선정되었다. 현장적용 결과 개발된 현장용 시험기는 암석의 강도 및 변형과 관련하여 필요한 대부분의 정보를 제공할 수 있는 성능을 확보하였음을 확인하였다.

• 터널과지하공간
• /
• 제23권2호
• /
• pp.110-119
• /
• 2013

터널 시공 중 천단침하와 내공변위를 측정하는 것이 일반화되어 있다. 터널 시공 중 계측기를 설치한 후 첫 번째로 측정한 천단침하와 내공변위의 1일간 변위량을 각각 초기천단침하속도와 초기내공변위속도로 또 마지막으로 계측한 천단침하와 내공변위를 각각 최종천단침하와 최종내공변위로 정의하고 계측한 최종변위와 초기변위속도의 관계를 분석하였다. 이를 위한 분석용 자료는 서울지하철 906공구에서 터널 시공 중 계측한 것이다. 이 터널의 폭과 높이는 각각 약 11.5 m, 10 m이며 지표에서 터널천단까지의 깊이는 약 10-20 m의 저심도 터널이다. 또 터널이 시공된 지층은 풍화토 또는 풍화암으로 연약한 지반이다. 터널은 상하반으로 나누어 시공되었고 길이는 1,820 m이다. 이번 분석에 이용한 계측치는 터널 상하반 시공 중에 얻은 것으로 천단침하계측 결과가 184개, 내공변위계측 결과는 258개이다. 분석결과 풍화토의 터널에서 초기변위속도와 최종변위가 상대적으로 큰 경향이 있었다.

• 대한토목학회논문집
• /
• 제32권5C호
• /
• pp.199-210
• /
• 2012

본 연구에서는 3차원 탄-소성 유한차분해석을 통해 기존재하는 단독말뚝, $3{\times}3$및 $5{\times}5$ 군말뚝의 바로 아래 풍화암 지반에서 실시된 터널시공으로 인한 말뚝의 거동을 분석하였다. 수치해석에서는 터널굴착으로 인한 말뚝의 거동을 규명하기 위하여 지반/말뚝의 침하 및 전단응력전이(shear stress transfer) 메커니즘을 심도있게 분석하였다. 터널굴착으로 유발된 지반의 침하와 말뚝-지반 사이 경계면에서의 상대변위 발생으로 인해 말뚝에 작용하는 전단응력 및 축력의 분포가 매우 크게 변화하였다. 계산된 결과에 의하면 터널굴착으로 인해 말뚝의 두부로부터 말뚝길이의 약 80%에 해당되는 위치까지는 상향의 전단응력이 발생하였고, 그 하부에서는 하향의 전단응력이 발생하였다. 이로 인해 말뚝의 축력이 터널의 굴착에 따라 지속적으로 감소하고, 순수한 터널의 시공으로 인하여 말뚝에는 인장력이 발생하였는데 이로 인해 말뚝에는 최대 $0.36P_a$의 인장력이 발생하였다, 여기서 $P_a$는 터널굴착이전에 말뚝두부에 작용하는 설계하중이다. 말뚝의 거동은 경계면에서의 전단강도 발현 정도에 가장 큰 영향을 받는 것으로 나타났다. 군말뚝의 경우 일반적으로 말뚝의 숫자가 증가할수록 터널의 시공에 의해 말뚝의 침하가 증가하는 것으로 나타났으며, 이와는 반대로 말뚝의 축력변화는 군효과(shielding effect)로 인해 단독말뚝의 경우에 비해 작은 것으로 분석되었다. 터널굴착으로 인한 말뚝침하의 증가로 인한 겉보기지지력(apparent pile capacity) 감소는 단독말뚝에 비해 군말뚝에서 두드러지는 것으로 분석되었다.

• 기술사
• /
• 제18권3호
• /
• pp.1-20
• /
• 1985

The traffic congestion of Seoul city has been one of the most serious problems to be settled since the advent of 1970s. As a means to mitigate traffic mess, the authority concerned launched the construction of subway line 3 and 4 in 1980. The two Subway lines slated for completion by 1985 cross each other and run north-south direction, passing through the metropolitan area of Seoul city fraught with high-rise edifices and large-scale shopping centers, and, in order to reduce blasting vibration, NATM was executed for a distance of 10 Km, instead of ASSM previously employed when subway line 1 and 2 were constructed. Tunnel blastings were implemented, preceded by classifying the rocks at construction area into five categories, namely, hard rock, semi-hard rock, weak rock weathered rock and silt and by calculating their respective specific charges through standard test blastings, by employing the pre-splitting and smooth blasting with drilling patterns of burn cut type, so as not to cause damages to surface structures. Most of explosives used were the slurry of low specific gravity and low velocity, and the firings executed by the use of milli-second detonators. Empiric formula were also formulated to check blasting vibrations, based on the vibration allowable values of West Germany standard, for the application to vulnerable construction zones. Should the two lines be placed for public service in 1985, about 40% of the total traffic population of Seoul city amounting to 15 million as of 1984 is estimated to be carried by subway with no difficulties.