• 화약ㆍ발파
• /
• 제21권4호
• /
• pp.1-10
• /
• 2003

연암평가는 굴착난이도 평가와 관계가 많은 것을 고려할 때 굴착과 관련되는 발파와 연관 지울 수 있다. 따라서 현장에서 소량의 화약을 사용하여 누두공시험에 의해 구해진 누두지수와 발파계수를 연암의 분류요소로 사용하기 위한 시도가 이루어 졌다. 또한 현지 지반의 탄성파속도와 암석의 파쇄에 대한 저항성 나타내는 Protodyakonov의 계수도 분류요소로 사용하여 연암의 분류를 실시하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 춘계학술대회 논문집
• /
• pp.53-67
• /
• 2003

In this paper, a new systematic method will be introduced, in which a Rock-mass Prediction System(RPS) predicts the geological conditions and rock mass movements before tunnel excavation and the appropriate counter-measures are taken in the expected weak zones during tunnel construction. The Rock-mass Prediction System(RPS) consists of the LIM, a horizontal con drilling and a seismic exploration method (TSP/HSP). In the Rock-mass Prediction System(RPS), the seismic exploration method (TSP/HSP) gives information on the locations of the weak zones such as major faults and voids in wide-range, and the horizontal core drillings are utilized to find exact location and widths of the faults or voids near the weak zones which was predicted by the seismic exploration method (TSP/HSP). The LIM is used to find the hardness of the rock mass and small weak zones near the excavation face. The Rock-mass Prediction System(RPS) was successfully applied to the Sol-An Tunnel and the effectiveness of the system was verified.

• 한국암반공학회:학술대회논문집
• /
• 한국암반공학회 2003년도 춘계학술발표회 논문집
• /
• pp.13-30
• /
• 2003

본 고에서는 터널 굴착전 대상지반의 지질상태 및 암반거동을 암반예측시스템(RPS)을 통해 사전에 예측하고, 시공중 취약구간에 대해 적절한 대응을 하는 새로운 종합적인 방법을 소개하고자 한다. 암반예측시스템(RPS)은 선진보링(LIM), 선진수평시추, 탄성파탐사(TSP/HSP)로 구성되어 있다. 암반예측시스템에서 탄성파탐사(TSP/HSP)는 주요 단층과 공동등 연약대의 위치에 대한 개략적인 정보를 제공하며, 선진수평시추는 탄성파탐사(TSP/HSP)에 의해 예측된 연약대 전방에서 단층 또는 공동의 위치와 폭을 확인하는 데 활용된다. 선진보링(LIM)은 암반의 연경도와 굴착면 부근의 작은 연약대를 발견하는 데 활용된다. 암반예측시스템(RPS)은 영동선 철도현장의 솔안터널에 성공적으로 적용되어 그 효용성이 입증되었다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.939-948
• /
• 2006

The structural anisotropy and heterogeneity of rock mass, caused by discontinuities and weak zones, have a great influence on the deformation behavior of tunnel. Tunnel construction in these complex ground conditions is very difficult. No matter how excellent a geological investigation is, local uncertainties of rock mass conditions still remain. Under these uncertain circumstances, an accurate forecast of the ground conditions ahead of the advancing tunnel face is indispensable to safe and economic tunnel construction. This paper presents the effect of anisotropy and heterogeneity of the rock masses to be excavated by numerical analysis. The influences of distance from weak zone, the size or dimension, the different stiffness and the orientation of weak zones are analysedby 2-D and 3-D finite element analysis. By analysing these numerical results, the tunnel behavior due to excavation can be well understood and the prediction of rock mass condition ahead of tunnel face can be possible.

• 터널과지하공간
• /
• 제17권1호
• /
• pp.9-16
• /
• 2007

굴진장이 터널의 안정성 및 시공비에 미치는 영향에 대해서는 많은 연구자와 기술자들이 잘 알고 있지만, 아직 굴진장 결정에 대해서 일관된 절차가 수립되지는 못한 실정이다. 본 연구에서는 굴진장을 고려한 연암터널의 막장과 무지보 구간의 거동형태를 실내모형실험, PFC3D 및 FDM 해석을 통하여 조사하였다. 총 다섯 개의 거동형태를 정의하였고, 막장 안전율과 설계 도표를 통해 거동형태를 정량적으로 판단할 수 있도록 하였다. 비록 본 연구에서 제안한 방법이 몇몇 제한을 갖지만, 굴진장과 굴착의 최적화를 위한 유용한 정보를 제공할 수 있을 것으로 사료된다.

• 터널과지하공간
• /
• 제3권2호
• /
• pp.132-141
• /
• 1993

Laboratory and field tests were performed to find out the effectiveness of ground improvement by grouting for an urban subway tunnel that was excavated in weak rock by the NATM. Field measurements were carried out to monitor the behavior of rock mass around the tunnel and to ensure the validity of the current design of the distance form the measuring points to the tunnel face. The final converged displacement and the peroid were predicted using the gamma function. It was found that the ground improvement in terms of reduced permeability and increased stength in the self-supportability of the excavation face enabled the NATM applied in poor gorund. As the result of applying the gamma function to the predicting of displacement, the final displacement including the preceding one and the converged period could be approximately predicted at the early excavation stage.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.100-109
• /
• 2004

Is this study, results of static pile load tests of in-situ cast piles in weak or uncemented sedimentary rock layers have been analyzed and presented. Consdierations on the characteristics of soils sedimentary rocks have been made. From the measurements of strain gauges and extensometers the relationship of unit skim friction versus displacement and that of unit end bearing versus displacement have been obatined to verity the characteristics of bearing capacity of this uncemented sedimentary rock layers. Also, a comparison has been made between ultimate skin friction in compression and tension.

• 화약ㆍ발파
• /
• 제16권2호
• /
• pp.23-33
• /
• 1998

본 연구는 현재 시공중에 있는 성주터널에 사용될 Rock Bolt의 설계 기준을 작성하는데 목적을 두었다. 이 성주터널의 개설은 본 구역의 암질이 연약하기 때문에 NATM(New Austrian Tunnelling method)으로 시공하는 것으로 가정하였으며 본 공법에서 소약되는 Rock Blot의 길이와 간격 등의 설계 기준을 작성하엿다. 그 결과 다음과 같은 결론을 얻었다. 1) 터널 주어암석을 조립사암, 상립사암, 사귀하암 그리고 silty세일은 보통암이고 흑색세이로가 그레이와케(Greywacke) 그리고 설암으로 확인되었다. 2) 본 터널에 사용할 Rock Blot의 길이를 3~4m의 것을 활용할때에 Blot의 간격은 사암에는 최소 1.3m에서 최대 1.8로, 혈암에는 최소 1.3m에서 최대 2.0m이다. 그리고, 그레이와케(Grey-wake)의 경우는 공히 1.5m로 설계되었다.

• Geomechanics and Engineering
• /
• 제36권6호
• /
• pp.575-587
• /
• 2024

The contact pressure between the surrounding rock and the support is an important indicator of the surrounding rock pressure. There has been a bottleneck in the prediction of contact loads between surrounding rock and primary support in deep-buried mountain tunnels. The main reason is that a reliable method wasn't existed to quantify the contact loads. This study had been taken into account the flexible support role of the primary support, and the fitting curve of surrounding rock deformation for dynamic tunnel construction was proposed. New formulas for the calculation of contact loads between surrounding rock and primary support were obtained by inversion. Comparative analysis of the calculation results with numerical simulation verified the reliability of the calculation method in this study. It can be seen from the analyses that the contact load between surrounding rock and primary support increases, remains unchanged and decreases during acceleration, uniform velocity and deceleration, respectively, and the deformation of the surrounding rock in the acceleration and deceleration stages cannot completely converted into contact loads. The contact loads between surrounding rock and primary support of medium-strength and weak surrounding rock tunnels are generally within 150 kPa and 1 MPa, respectively. For tunnels with weak surrounding rock, advanced support can be installed to reduce the unique release coefficient λ₀ and the value of the constant D, with the purpose of reducing the contact loads between surrounding rock and primary support. Changes in support parameters have a small effect on the contact loads between surrounding rock and primary support, but increase or decrease the safety factor, resulting in a waste of resources or a situation that threatens the safety of the support. The results of this research provide guidance for the prediction of contact loads between surrounding rock and primary support for dynamic tunnel construction.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 봄 학술발표회 논문집
• /
• pp.63-70
• /
• 2002

In tunnel construction, the information on the rock quality and the location of fault or fracture are crucial for economical design of support pattern and for safe construction of the tunnel. The grade of rock is commonly estimated through the observation with the naked eye of recovered cores in drilling or from physical parameters obtained by their laboratory test. Since drilling cost is quite expensive and terrains of planned sites for tunnel construction are rough in many cases, however, only limited information could be provided by core drilling Electrical resistivity and EM surveys may be a clue to get over this difficulty. Thus we have investigated electrical resistivity and EM field data providing regional Information of the rock Quality and delineating fault and fracture over a rough terrain. In this paper, we present some case histories using electrical resistivity and EM survey for the site investigation of tunnel construction. Through electrical resistivity and EM survey, the range and depth of coal seam was clearly estimated, cavities were detected in limestone area, and weak zones such as joint, fault and fracture have been delineated.