• Journal of the East Asian Society of Dietary Life
• /
• v.14 no.1
• /
• pp.39-46
• /
• 2004

Waxy maize starches are inherently stable in soluble status and can be chemically modified to improve stability along with heat, acid and shear resistance. This study was carried out to investigate the effect of theological and sensory characteristics of the yellow layer cake made by adding different levels of waxy maize starch as a fat substitute for shortening. By increasing the substitution level of waxy maize starch for shortening, the specific gravity of cake batter increased and the viscosity decreased. The microstructures of cake crumb observed by the scanning electron microscope were not different significantly, and the size of air cells and fat particles also were not substantially decreased by increasing fat substitution level. The texture profile analysis using texture analyzer decreased by increasing the different substituting levels of waxy maize starch. Among various sensory properties, the color value of layer cake increased by increasing the level of waxy maize starch. However, the appearance, flavor, taste, texture and overall preference decreased.

• Applied Biological Chemistry
• /
• v.34 no.1
• /
• pp.75-76
• /
• 1991

Bran structure and gelatinization property of upland and lowland japonica waxy brown rice were compared. Dimension, weight and number of aleurone layer were similar between upland(Nonglimna 1) and lowland(Shinsunchalbyeo) rices, but the aleurone layer and pericarp of upland rice were thicker. Water uptake rate of upland rice at $60^{\circ}C$ was lower than that of lowland one. There was no difference in intrinsic viscosity between two rice starches. Upland rice starch had lower onset temperature, narrower gelatinization temperature and lower water content lot gelatinization compared with lowland rice starch.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.3
• /
• pp.395-402
• /
• 2005

White layer cakes with 10-50% content of domestic millet and waxy millet were carried out to determine how the content of millet and waxy millet affected Quality and properties of a product. The 10% content of waxy millet resulted in the greatest volume, which decreased with the increase in the content of millet and waxy millet; up to 40% content of millet and waxy millet made no significant difference in weight from the control one. The specific loaf volume decreased with the increase in the content of millet and waxy millet. In terms of crum color, as the content of millet and waxy millet increased, the value of L tended to decrease, making it darker, and there was a significant increase in the value of a and b. As for crust color, the value of L, a, and b tended to increase with the increase in the content of millet and waxy millet, making it darker, but with no significant difference from the control one. In terms of texture, 10% content of millet and 10-20% content of waxy millet made no significant difference in hardness from the control one; as for retrogradation, waxy millet tended to make greater increase in hardness than millet. 5℃ storage resulted more rapidly in retrogradation than 25℃. The sensory evaluation showed that with the increase in the content, waxy millet, millet, and the control in order served to make it darker and harder in terms of external properties, with small pores, uneven texture, and reduced flavor in terms of internal properties. There was no significant difference between the cake with 10-20% content of millet and waxy millet and the control one in making a white layer cake by adding millet and waxy millet.

• Applied Biological Chemistry
• /
• v.33 no.2
• /
• pp.105-108
• /
• 1990

The numbers of aleurone layers and thickness of pericarp of waxy rice in dorsal side were higher than those in vental side, However, varietal characteristics of the bran structures were observed. The water uptake rates of brown rice at $60^{\circ}C$ were similar between $j{\times}indica$ varieties(Hangangchalbyeo, H and Baegunchalbyeo, B) and higer than that of japonica variety (Shinsunchalbyeo, S). Inherent viscosities for H, B and S waxy rice starches were 1.92, 1.84 and 1.73 $dlg^{-1}$, respectively. The minimum moistures for gelatinization of waxy rice starches determined by DSC were $36.4{\sim}38.6%$ which represented 4moles of water per mole of hexose unit.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.262-262
• /
• 2017

Brown rice contains a variety of nutritional and bio-functional components compared to milled rice. However, low consumer preference for steamed brown rice and short shelf life has been implicated as deterrents to the direct consumption of brown rice. This study was undertaken to determine the effect of degree of milling (DOM) on pasting and aging properties of brown rice cultivar. Short-grain (Japonica type) brown rice cv. Boseogchal (BSC), Baegjinju (BJJ), and Hiami (HIAM) were evaluated every month during 4 months storage. Rice cultivar were categorized into waxy (BSC), medium-waxy (BJJ), and non-waxy (HIAM) of which amylose contents were 6.81%, 10.06%, and 16.69~16.72%, respectively. Peak viscosity was the highest in BJJ followed by HIAM, and BSC, showing peak viscosity was lower at low temperature storage. At storage at room temperature from 60 to 120 days, the FFA content significantly increased in the rice samples with DOM1% followed by 3% and 5%, while not significant increase in DOM0% brown rice: at 120 days, the FFA ranged in 28.35~41.48, 111.99~130.06, 76.87~91.99, and 47.13~62.37 mg KOH/100g for DOM 0%, 1%, 3% and 5%, respectively. It indicated that the fat rancidity was the least in the order of DOM 0%, 5%, 3% and 1%. Storage at low temperature could reduce fat hydrolysis with lower FFA release, but rice grain with 1% MD also released more FFA compared to the other samples. It could be assumed that the most outer bran layer, approximately 1~3%, could provide a strong protection from fat rancidity. Pasting viscosity of rice samples also increased with increasing DOM rate. Results indicated that DOM was the most significant factor for lipid rancidity during storage, resulting in high FFA formation. It suggested that brown rice with DOM 0% and/or more than DOM 5% could provide the best shelf life.

• The Korean Journal of Pesticide Science
• /
• v.6 no.1
• /
• pp.16-24
• /
• 2002

Research trends in the measurement of foliar uptake of pesticides and the recently proposed action mechanism of the surfactant-induced uptake of pesticides were reviewed with the related reports and studies. Major techniques used in those fields are bioassay, radiotracer techniques with leaves or cuticular membrane. Recently, a new method using Congo Red as a tracer was proposed. The limiting factor in the pesticides uptake into leaves is the waxy layer which consists of the epicuticular and cuticular wax. Physico-chemical parameters such as molar volume, water solubility and partition coefficient of pesticides have limited influences on the pesticide uptake into leaves. Polydisperse ethoxylated fatty alcohol surfactants are well known as the good activator for many pesticides. It is now generally agreed that uptake activation is not related to the intrinsic surface active properties of surfactants such as surface activity, solvent property, humectancy and critical micelle concentration. Recent studies using ESR-spectroscopy revealed that the surfactants have an unspecific plasticising effect on the molecular structure of the wax and cuticular matrix, leading to increased mobilities of pesticides. Penetration of surfactants into waxy layer altered the pesticide mobility in wax and the partition coefficient of pesticide, and then the pesticides penetration into leaves was enhanced temporally. The enhancing effect of surfactant could be significantly different depending on the carbon number of aliphatic moiety and the number of ethoxy group in polyoxyethylene chain of surfactants. It is suggested that the rate of penetration of surfactants should have a significant relationship with the rate of penetration of pesticides.

• Journal of Ecology and Environment
• /
• v.41 no.9
• /
• pp.265-270
• /
• 2017

Background: Over the years, pine pollens have been excluded as an allergen due to its relatively large size, low protein content, and waxy hydrophobic layer, despite their abundance. However, recent studies suggest the possibilities of pine pollens being allergens, and it has been reported that allergy symptoms were highly prevalent in areas with considerably large pine forests and high possibility of exposure to the pollen. Therefore, we conducted a comparative analysis of the allergenicities of the pollens from the dominant species of Korean pines, red pine (Pinus densiflora), black pine (Pinus thunbergii), and pitch pine (Pinus rigida), in mice. Methods: The protein composition of the pollens from the three pine species was compared via sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE). The pine pollens and proteins extracted from the pollens were introduced to BALB/c mice by nasal inhalation and application to exposed skin and the IgE produced by the mice were extracted from blood and analyzed via ELISA. Results: SDS-PAGE showed differing protein compositions of the pollens of the three pine species. Analysis of blood IgE compositions showed a similar amount of IgE produced when pollens were applied to skin. In contrast, when mice inhaled the pollens, P. densiflora was shown to induce significantly more IgE production than those of the other two species. Conclusions: The experimental results demonstrate that the pollens of all three South Korean pine species induce IgE production, and this production was more pronounced when the pollens were inhaled than when they were applied to the skin. Of the three species, the pollen of P. densiflora was found to induce the highest level of IgE production.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.42 no.1
• /
• pp.68-78
• /
• 1997

Laboratory and greenhouse studies were conducted to determine differential sensitivities on absorption of $^{14}$ C-oxyfluorfen and the anatomical responses in wheat and barley to protoporphyrinogen oxidase-inhibiting herbicides [oxyfluorfen (2-chloro-1- (3-ethoxy -nitrophen-oxy)-4-(trifluoromethyl) benzene, acifluorfen(5-[2-chloro-4-(trifluoromethyl) phenoxy]-2-nitro-benzoic acid), bifenox(methyl-5-(2, 4-dichlorophenoxy)-2-nitrobenzoate) and oxadiazon(5-tert-butyl-3-(2, 4-dichloro-5-isopropoxyphenyl)-1, 3, 4-oxadiazol-2-one)]. I$_{50}$ value of the tolerant wheat cultivars to oxyfluorfen was about 10$^{-4}$ , whereas that of the susceptible barley cultivars was about 10$^{-6}$ M, showing significant difference between the two groups. When foliage were applied with acifluorfen, bifenox or oxadiazon, the oxyfluorfen-tolerant wheat showed less decreased in shoot fresh weight and chlorophyll content than the susceptible barley. Also, when soil-applied with these herbicides test plants showed similar tendency in foliar application. Electrolyte leakage from the tissue treated with these compounds was the more influenced in the barley than the wheat. Malondialdehyde(MDA) production as index of lipid peroxidation was greater in the barley than the wheat by treatment of these compounds. Therefore, the differential sensitivities of wheat and barley to protoporphyrinogen oxidaseinhibiting herbicides was showed by our greenhouse and in vitro experiment. The absorption rates of $^{14}$ C-oxyfluorfen were higher in the barley than the wheat. And this tendency was showed appararitly difference by increase of treatment durations. After the oxfluorfen and oxadiazon treatment, the tolerant wheat did not show the structural damage in leaf surface, but the susceptible barley was damaged in the leaf waxy layer. However, the acifluorfen and bifenox treatment showed no difference between wheat and barley. The anatomical changes by these compounds treatment were not observed in the tolerant wheat but epidermal cell and mesophyll cell were highly broken in the susceptible barley.