• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.5
• /
• pp.107-114
• /
• 2006

This paper investigates the radiating source of electro-magnetic waves in the cabin of automobile with spark ignition engine. Front seats are very close to the engine room where electro-magnetic waves are expected to be radiating. But front seat area is believed to be a blind zone, which is not affected by radiating electro-magnetic waves, because a bulk board and floor board shield the front seat area. The level and frequency spectrum of electro-magnetic waves are measured at the passenger seat and the engine room. The measured frequency range is $145{\sim}365MHz$. As a results, the level of the electro-magnetic waves of automatic transmission vehicle is greater than -82dBm. The shapes of frequency spectrum of both engine room and passenger seat are look alike. But the level of electro-magnetic waves of manual transmission vehicle is less than -82dBm and the shapes of frequency spectrum of engine room and passenger seat are different to each other. From these results, we can say that any mal-function caused by electro-magnetic waves in the automobile cabin are only possible for automatic transmission vehicle. Also, it is believed that the radiating source of electro-magnetic waves is inside the vehicle. Thus, based on the transmission line theory, this paper presumably concludes that the cables which connect all the components inside a automatic transmission vehicle must be a radiating source of electro-magnetic waves in the cabin.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.26 no.2
• /
• pp.81-95
• /
• 2014

In the present study, the statistical analysis on the storm waves in the East Sea have been carried out, and the several storm waves were reproduced by the modified WAM as a first step for the accurate and prompt forecasting and warning against the swell waves in East Sea. According to the present study, the occurrences of the storm waves from the North were the most probable, while the waves from the Northeast were most frequently observed. It was found that the significant wave heights of storm waves from the North and Northern northeast were larger than those of storm waves from the Northeast. But due to long fetch distance, the significant wave periods of storm waves from the Northesast were longer than those of North and Northern northeast. In addition to the wave analysis, the numerical experiments for the storm waves in East Sea were carried out using the modified WAM, and three periods of storm waves in 2013 were calculated. The numerical results were well agreed with wave measurements. However the numerical simulation results in shallow water region showed lower accuracies compared to deep water, which might be due to lower resolution of wind field and bottom topography caused by large grid size, 5 minute, adopted in the present study. Overall computational efficiency of the modified WAM found to be excellent compared to original WAM. It is because the modified WAM adopted the implicit scheme, thereby the present model performed 10 time faster than original WAM in computation time.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.2
• /
• pp.107-112
• /
• 2013

In this paper, we discuss a 3-dimensional localization sensor node using EM waves (Electromagnetic waves) with RSSI (Received Signal Strength Indicator). Generally EM waves cannot be used in underwater environment, because the signal is highly attenuated by the water medium according to the distance. Although the signal quickly reduces in underwater, the reducing tendency is very clear and uniform. Hence EM waves have possibility as underwater distance sensors. The authors have verified the possibility by theory and several experiments, and developed calibration methods in case of linear and planer environment. For 3-dimensional localization in underwater, it must be known antenna's radiation pattern property in electric plane(called E-plane). In this paper, we proceed experiments to verify attenuation tendency with z axis movement, PLF (Polarization Loss Factor) and ILF (Inclination Loss Factor) with its theoretical approach.

• Journal of Ocean Engineering and Technology
• /
• v.22 no.5
• /
• pp.1-6
• /
• 2008

A kinematics model of a ship wake in the presence of surface waves generated by wind is presented. It was found that a stationary wave structure behind a ship covered a wedge region with the angle at the top of the wake and that only divergent waves were present in a ship wake instead of both the longitudinal and cross-waves, which are known as the Kelvin model. Ship motion at some angle to wind waves can cause an essential asymmetry of the wake, compressing its windward half.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.31 no.3
• /
• pp.271-277
• /
• 2011

This study presents a nondestructive test for underwater PVC pipes. To use guided ultrasonic waves, specially denoted by cylindrical Lamb waves, a test setup was made in a water tank using the pitch and catch mode and specimens were made to give artificial cutouts located in the circumferential direction of the pipes. Total three states of damaged levels were considered to see how the guided waves interact with the defects. For the experimental adjustments, three different pipe diameters (60, 90, 114 mm) were tested, and two factors - incident angle (10 and $40^{\circ}$) and distance (50 and 200 mm) - were tried. From the results, regardless of the diameters and two experimental factors, it is shown that the degrees of defects were recognized through amplitude and arrived time of the very first part of the received cylindrical Lamb waves. Between amplitude and arrived time, it is found that the amplitude gives more sensitive results.

• Journal of Ocean Engineering and Technology
• /
• v.10 no.3
• /
• pp.62-73
• /
• 1996

Numerical simulation is made of the three-dimensional wave breaking motion about a part of a floating offshore structure containing a circular cylinder mounted vertically onto a lower hull in regular periodic gravity wave generated by a numerical wave maker. TUMMAC-VIII finite-difference method is newly developed for such a problem. By use of density-function technique the three-dimensional wave breaking motion is approximately implenented in the framework of rectangular grid system. A porosity technique is devised for the implementation of the no-slip bydy boundary conditions. The generation of breaking waves by the interaction of incident waves with the structure is well simulated and interesting features of breaking waves are revealed with containing degree of quantitative and qualitative accuracy.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.10a
• /
• pp.434-478
• /
• 2006

Stress waves have been used for geophysical and geotechnical applications for more than 50 years. The early-stage applications were simply based on travel-time measurements of stress waves and limited to site characterization. Currently stress-wave techniques are expanded to monitoring processes for grouting of damaged geotechnical structures, compaction of embankment, and deformational analyses for static geotechnical problems. Seismic techniques used to be good enough for rough estimators of engineering properties. Nowadays, the sophisticated modeling theory of stress-wave propagation substantially improved reliability and accuracy of the seismic techniques. In this paper, difficulties involved in currently available seismic techniques are discussed and analyzed. Herein some recently-developed non-intrusive seismic techniques, which make optimal use of stress waves for further improvement of reliability and accuracy, are also presented.

• Geomechanics and Engineering
• /
• v.16 no.1
• /
• pp.11-19
• /
• 2018

Propagation of the generalized Rayleigh waves in an elastic half-space covered by an elastic layer for different initial stress combinations and imperfect contact conditions is investigated. Three-dimensional linearized theory of elastic waves in initially stressed bodies in plane-strain state is employed, the corresponding dispersion equation is derived and an algorithm is developed for numerical solution to this equation. Numerical results on the influence of the initial stress patterns and on the influence of the contact conditions are presented and discussed. The case where the external forces are "follower forces" is considered as well. These investigations provide some theoretical foundations for the study of the near-surface waves propagating in layered mechanical systems and can be successfully used for estimation of the degree of the bonded defects between layers, fault characteristics and study of the behavior of seismic surface waves propagating under the bottom of the oceans.

• International Journal of Ocean System Engineering
• /
• v.2 no.1
• /
• pp.8-15
• /
• 2012

An experimental study was carried out in order to understand the kinematics of bichromatic waves. Bichromatic waves are generated in a two-dimensional wave tank, and measured by panorama PIV technique, which allows the flow fields to be captured with respect to a spatial coordinate system. We compared wave profiles and velocities of wave particles obtained by experiment with theoretical results using Stokes 1st and 2nd order waves. The velocity distribution at wave crest and trough of the highest and lowest point of a bichromatic wave are investigated in this study.

• 한국기계연구소 소보
• /
• s.10
• /
• pp.49-62
• /
• 1983

A series of model tests on a container ship in waves was executed at the Experimental Towing Tank of Ship Research Station, KIMM. This paper presents the results of resistance, self-propulsion, propeller open-water and ship motion tests in regular head waves. Firstly, the experimental results of ship motion measured on a towed model and a self-propelled model were compared with those of Japanese results showing fairly good agreements. Secondly, the results of resistance and propulsion tests were analyzed and the data of added resistance, thrust increase, torque increase, revolution increase and self-propulsion factors in waves were presented. Also the diffraction force measured on a fixed model in waves was analyzed. Finally, this report shows the propeller characteristics in calm water based on propeller immersion and in regular waves based on wave length.