• 대한기계학회논문집B
• /
• 제24권2호
• /
• pp.280-287
• /
• 2000

Laboratory measurements were made of wall pressure fluctuations in a separated and reattaching flow over a backward-facing step. An array of 32 microphones along the streamwise direction was utilized. Various statistical properties of pressure fluctuations were scrutinized. The main emphasis was placed on the flow inhomogeneity along the streamwise direction. One point statistics such as the streamwise distribution of rms pressure and autospectra were shown to be generally consistent with other studies. The coherences and wavenumber spectra in the streamwise directions were indicative of the presence of dual modes in pressure; one is the large-scale vortical structure in low frequency and the other is the boundary-layer-like decaying mode in high frequency.

• Bulletin of the Korean Chemical Society
• /
• 제32권7호
• /
• pp.2332-2338
• /
• 2011

In this study, we proposed a new promising idea of utilizing moving window principal component analysis (MWPCA) as a sensitive diagnostic tool to detect the presence of peak position shift. In this approach, the moving window is constructed from a small data segment along the wavenumber axis. For each window bound by a narrow wavenumber region, separate PCA analysis was applied. Simulated spectra with complex spectral feature variations were analyzed to explore the possibility of MWPCA technique. This MWPCA-based detection of the peak shift, potentially coupled with 2D correlation analysis to provide additional verification, may offer an attractive solution.

• 한국소음진동공학회논문집
• /
• 제17권5호
• /
• pp.405-414
• /
• 2007

최근 난류유동에 대한 많은 실험 및 이론적 연구들은 무질서해 보이는 난류유동도 특정한 구조를 가지고 있으며 그 구조적 특성들이 반복적이며 가시적인 질서들을 가지고 있음을 보여주고 있다. 헤어핀 와류는 벽면 영역에서 난류경계층을 발전시키고 지탱하는 중요한 역할을 하는 난류의 핵심 구조로서 벽면 압력변동의 주요 특성을 설명해 줄 수 있는 개념 모델로 여겨지고 있다. 이 연구에서는 난류경계층에서 생성되는 헤어핀 와류들이 유기하는 표면 압력과 압력 스펙트럼을 평가하고 부착와류 모델링을 통해 이들이 유기하는 전체 표면 압력과 그에 상응하는 스펙트럼을 계산하였다. 이 연구를 통해 확립된 해석방법을 검증하기 위해 기존의 실험 및 이론계산을 통해 얻어진 결과들과 비교하여 신뢰성과 유용성을 증명하였다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2003년도 The Fifth Asian Computational Fluid Dynamics Conference
• /
• pp.39-41
• /
• 2003

n this paper, direct numerical simulation of decaying compressible turbulence with passive scalar is performed by using 7th order upwind difference scheme or 8th order group velocity control scheme. The start Reynolds number (defined by Taylor scale) is 72 and turbulent Mach numbers are 0.2-0.9. The Schmidt numbers of passive scalar are 2-10. The Batchelor k-1 range are found in scalar spectra, and the high wavenumber spectra decays faster with increasing turbulent Mach number. The extend self-similarity (ESS) is found in the passive scalar in compressible turbulence.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.4106-4106
• /
• 2001

A method to discriminate human gallstones by nea. infrared(NIR) spectrometry using a soft independent modeling of class analogy (SIMCA) has been studied. The fifty NIR spectra of gallstones in the wavenumber range from 4500 to 10,000 cm$\^$-1/ were measured. The forty samples were classified to three classes, cholesterol stone, calcium bilirubinate stone and calcium carbonate stone according to the contents of major components in each gallstone. The training set which contained objects of the different known class was constructed using forty NIR spectra and the test set was made with ten different gallstone spectra. The number of important principal components(PCs) to describe the class was determined by cross validation in order to improve the decision criterion of the SIMCA for the training set. The score plots of the class training set whose objects belong to the other classes were inspected. The critical distance of each class was computed using both the Euclidean distance and the Mahalanobis distance at a proper level of significance(${\alpha}$). Two methods were compared with respect to classification and their robustness towards the number of PCs selected to describe different classes.

• 한국철도학회논문집
• /
• 제12권6호
• /
• pp.989-995
• /
• 2009

Short-time Fourier transforms(STFT)은 시간에 따라 변동하는 조화성분을 가지는 신호의 분석에 유용하게 적용되는 방법이다. 철도차량의 진동신호에서 많이 발견되는 운동학적 진동은 조화 특성이 속도 변화에 따라 점진적으로 변하기 때문에 오더 분석 방법과 상관함수를 이용하면 STFT 분석 방법을 개선할 수 있다. 본 논문에서는 차량의 속도 신호를 구할 수 없거나 잡음이 많을 때 상관함수를 이용하여 신호를 재추출하여 오더 분석을 적용하는 방법에 대하여 다룬다. 이 방법을 한국형고속열차의 운행 중에 취득한 차축 및 차체 진동데이터의 분석에 적용하여 기존의 STFT와 오더 분석을 이용한 방법을 비교 하였다.

• 대기
• /
• 제25권4호
• /
• pp.601-610
• /
• 2015

This study measured the emissivity spectra of 5 major rock-forming minerals using a Fourier Transform Infrared (FT-IR) spectrometer in the spectral region of $650{\sim}1400cm^{-1}$. The mineral samples are quartz, albite, bytownite, anorthite, and sandstone. We compared emissivity spectra measured in this study with spectra provided by Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) and Arizona State University (ASU). The spectral features of emissivity such as Reststrahlen Band (RB) and Christiansen Feature (CF) locations were compared. Results showed that both CF and RB locations of emissivity spectra measured in this study were similar to those from ASTER and ASU. In the case of quartz, the RB was occurred in the region of $700{\sim}850cm^{-1}$ and $1050{\sim}1250cm^{-1}$. The spectral position of emissivity peak was in good agreement with the location of ASTER and ASU. For plagioclase (albite, bytownite, and anorthite), the spectral location of CF was shifted toward larger wavenumber and the emissivity value was increased in the region of $870{\sim}1200cm^{-1}$ with Ca percentage. The CF of anorthite and bytownite was occurred at $1245.79cm^{-1}$, and that of albite was occurred at $1283.79cm^{-1}$. We also confirmed that emissivity feature of sandstone includes both emissivity features of quartz and calcite. However, there were some differences in the magnitude of emissivity and locations of RB and CF. These were due to the differences in measurement methods, and differences in particle size and temperature of samples.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1999년도 제17회 학술발표회 논문개요집
• /
• pp.135-135
• /
• 1999

It is well known that Raman spectroscopy is powerful tool in analysis of sp3/sp3 bonding fraction in diamond-like carbon(DLC) films. Raman spectra of DLC film is composed of D-peak centered at 1350cm-1 and G-peak centered at 1530cm-1. The sp3/sp3 fraction is qualitatively acquired by deconvolution method. However, in case of DLC film, it is generally observed that G-peak position shifts toward low wavenumber as th sp3 fraction increases. However, opposite results were frequently observed in ta-C films. ta-C film has much higher residual compressive stress due to its high sp3 fraction compared to the DLC films deposited by CVD method. Effect of residual stress on G-peak position is most recommendable parameter in Raman analysis of ta-C, due to its smallest fitting error among many parameters acquired by peak deconvolution of symmetric spectra. In current study, the effect of residual stress on Raman spectra was quantitatively evaluated by free-hang method. ta-C films of different residual stress were deposited on Si-wafer by modifying DC-bias voltage during deposition. The variation of the G-peak position along the etching depth were observed in the free-hangs of 20~30${\mu}{\textrm}{m}$ etching depth. Mathematical result based on Airy stress function, was compared with experimental results. The more reliable analysis excluding stress-induced shift was possible by elimination of the Raman shift due to residual compressiove stress.

• Journal of Photoscience
• /
• 제5권3호
• /
• pp.105-109
• /
• 1998

By using the liquid -phase-deposition (LPD) process, which has a potetnial of preparing organic inorganic composite materials, samples doped with benzo[f]quinoline (BfQ)into silica thia films wre prepared. We observed the fluorescene and fluorescene excitation spectra of the samples, as well as the fluorescence lifetimes and time-resoluved fluorescence spectra. The comparison of thefluorescence spectra in pH-controlled buffer solutions yields the results that the dominant species of BfQ in the LPD silica films is a protonated one. The fluorescence band assigned to a hydrogen-bonded species was observed on the samples prepared from the dipping solutions of 3 and 2 M hexafluorosilicic acid. The band assignment was confirmed by the fluorescence lifetime measurement. The FT-IR M hexaflurosilicic acid. The band assignment was confirmed by the flurescence lifetime meausurement. The FT-IR data proved the existence of included water in silica films prepared from the LPD process. The appearance of the band corresponding to the hydrogen-bonded species within LPD silica phases was explained by the proesence of included water. Depending on the preparation conditions of LPD silica films, the band assigned to protonated species shows bad shifts in a wavenumber region between the peak of hydrogen-bonded and typical protonated species. This implies that there is some distribution of steric conformation of protonated species of BfQ interacting with adsorbing sites of LPD silica. The time -resolved fluorescence spectra suggest that some relaxation process is involved in the conformation of BfQ doped into the solid phase of LPD silica.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.779-782
• /
• 2002

We examine the problem in which porous/viscoelastic compliant thin plates are subject to pressure fluctuations under transitional or turbulent boundary layer. Measurements are presented of the frequency spectra of the near-field pressure and radiated sound by compliant surface. A porous plate consisting of 5mm thick, open-cell foam with fabric covering and a viscoelastic painted plate of 1mm thick over an acoustic board of 4m thick were placed over a rigid surface in an anechoic wind tunnel. Streamwise velocity and wall pressure measurements were shown to highly attenuate the convective wall pressure energy when the convective wavenumber ($k_{ch}$) was 3.0 or more. The sound source localization on the compliant walls is applied to the measurement of radiated sound by using an acoustic mirror system.