• IEIE Transactions on Smart Processing and Computing
• /
• v.3 no.4
• /
• pp.167-172
• /
• 2014

In this paper we propose a waveform design algorithm that localizes the maximum output power in the target direction. We extend existing monostatic radar optimal waveform design schemes to bistatic multiple-input multiple-output (MIMO) radar systems. The algorithm simultaneously calculates the direction of departure (DoD) and the direction of arrival (DoA) using a two-dimensional multiple signal classification (MUSIC) method, and successfully localizes the maximum transmitted power to the target locations by exploiting the calculated DoD. The simulation results confirm the performance of the proposed algorithm.

• Journal of Communications and Networks
• /
• v.10 no.4
• /
• pp.451-454
• /
• 2008

Ultra-wideband (UWB) radios have attracted great interest for their potential application in short-range high-data-rate wireless communications. High received signal to noise ratio and compliance with the Federal Communications Commissions (FCC) spectral mask call for judicious design of UWB pulse shapers. In this paper, even and odd order derivatives of Gaussian pulse are used respectively as base waveforms to produce two synthesized pulses. Our method can realize high efficiency of spectral utilization in terms of normalized effective signal power (NESP). The waveform design problem can be converted into linear programming problem, which can be efficiently solved. The waveform based on even order derivatives is orthogonal to the one based on odd order derivatives.

• Journal of Electrical Engineering and Technology
• /
• v.3 no.2
• /
• pp.213-217
• /
• 2008

The flux-lock type superconducting fault current limiter(SFCL) can apply the magnetic field into the high-$T_C$ superconducting(HTSC) element by adopting the magnetic field coil in its third winding. To apply the magnetic field into the HTSC element effectively, the capacitor for LC resonance is connected in series with the magnetic field coil. However, the current waveform of third winding for the application of the magnetic field is affected by the LC resonance condition for the frequency of the source voltage and can affect the waveform of the limited fault current. In this paper, the current waveform of the third winding in the flux-lock type SFCL according to LC resonance condition during a fault period was analyzed. From the differential equation for its electrical circuit, the current equation of the third winding was derived and described with the natural frequency and the damping ratio as design parameters. Through the analysis according to the design parameters of the third winding, the waveform of the limited fault current was confirmed to be influenced by the current waveform of the third winding and the design condition for the stable fault current limiting operation of this SFCL was obtained.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.6
• /
• pp.567-574
• /
• 2003

It is important to design and evaluate the chip waveform with the minimum MAI under the bandwidth constraint in the interference-limited DS-CDMA system. In this paper, by approximation we present the analytical chip waveforms that are proposed and optimized in the reference. Their performances are compared with performances of three conventional chip waveforms: rectangular, half-sine and raised-cosine. Waveform 1 of the proposed chip waveform outperforms the conventional ones. BER and throughput performance are evaluated in the Rayleigh and Nakagami-m fading channels when DPSK modulation is used. When the required BER is 10$\^$-3/ in two fading channels, the capacity of the waveform 1 is improved about 20 % rather than raised-cosine one. When the offered traffic is 30 and the number of packet per bit(N$\sub$d/) is 14, maximum throughput of the waveform 1 is better than raised-cosine chip waveform about 18 % in two fading channels.

• Journal of Positioning, Navigation, and Timing
• /
• v.11 no.4
• /
• pp.341-349
• /
• 2022

When designing a new RNSS signal, the performance analysis for the legacy signal providing the same service, is required to determine the performance requirements. However, there are few studies on the secured service (SS) signal performance analysis, and the waveform is the only published information on the signal design component of the SS signal. Therefore, in this paper, we introduce several figures-of-merit (FoMs) that can be used for performance analysis in terms of the waveform. And then, we calculate the FoMs, such as autocorrelation main peak to secondary peak ratio (AMSR), spectral efficiency, Gabor bandwidth, multipath error, and jamming resistance quality factor, for the existing SS signals and discuss the analysis results. Finally, we conclude that the superior waveform for each FoM is different, and that the consideration of the trade-off relationship between the FoMs is required for waveform design.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.366-372
• /
• 2007

Self-sensing measurement of piezo inkjet and its application are discussed. The pressure wave inside the inkjet dispenser was measured by current measurement due to self-sensing capability of PZT. The pressure wave measured from current was verified by commercially available laser vibrometer. Here, two applications using self-sensing signal were discussed: waveform design for high speed jetting and condition monitoring. For waveform design, two pulse waveform was designed based on self-sensing signal such that the pressure wave after droplet formation can be minimized. For condition monitoring, self-sensing signal was shown to be effective in detecting air bubble trapped in inkjet printhead.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.52 no.9
• /
• pp.454-459
• /
• 2003

Conventional integral-slot design in permanent magnet(PM) motor tends to have a high cogging torque and large end turns, which contribute to copper losses. The fractional-slot design is effective compared to integral-slot design in the cogging torque and electromotive force(EMF) waveform. The effectiveness of fractional slot can be maximized by selecting optimal pole to slot ratio. This paper presents the effect of pole to slot ratio on the cogging torque and EMF waveform in the PM motor with fractional-slot. The effectiveness of the proposed designs has been confirmed by comparing waveform of EMF. cogging torque and torque ripple between conventional and new models.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.7
• /
• pp.641-648
• /
• 2002

The study on the chip waveform design to minimize multiple-access interference (MAI) and its performance evaluation are very important since chip waveform decides the signal quality and system capacity of the direct-sequence CDMA wireless communication system. This paper suggests the analytical chip waveform to minimize the MAI. The BER and throughput performances achieved by the proposed analytical optimum chip waveform are compared with those of the conventional chip waveforms in the Nakagami-m distribution frequency selective channel when the differential phase shift keying (DPSK) is employed in DS-CDMA system. From the numerical results, capacity and throughput are improved about 2 times and 1.4 times respectively when it is compared with the Kaiser chip waveform that is considered as one of the best in the conventional ones.

• ETRI Journal
• /
• v.38 no.1
• /
• pp.70-80
• /
• 2016

This paper addresses the problem of robust waveform design for distributed multiple-radar systems (DMRSs) based on low probability of intercept (LPI), where signal-to-interference-plus-noise ratio (SINR) and mutual information (MI) are utilized as the metrics for target detection and information extraction, respectively. Recognizing that a precise characterization of a target spectrum is impossible to capture in practice, we consider that a target spectrum lies in an uncertainty class bounded by known upper and lower bounds. Based on this model, robust waveform design approaches for the DMRS are developed based on LPI-SINR and LPI-MI criteria, where the total transmitting energy is minimized for a given system performance. Numerical results show the effectiveness of the proposed approaches.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.4 s.121
• /
• pp.333-341
• /
• 2007

Waveform design method for inkjet printing has been proposed tv pressure wave measurement. The pressure wane inside the inkjet dispenser can be effectively measured by current measurement due to self-sensing capability of PZT. The pressure wave measured from current was verified by commercially availablelaser vibrometer. In order to obtain high speed inkjet droplets, two pulse waveform was designed such that the pressure wane after droplet formation can be minimized.