• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.681-684
• /
• 2003

Piezoelectric motors have been successfully developed for various applications like autofocus drives in camera lenses and handling equipment for high-accuracy positioning. In this paper, the travelling-wave motor which used in the camera lense, using bending vibration of a ring was studied. The basic structure of the motor is same but we suggested a few parameters for considering their design. The parameter is different from sine and cosine region of the voltage of the ceramic surface, displacement according to the wave number difference, and the phase difference. Same size of ceramics and aluminium ring were used for the stator. As a result, the displacement is dependent on the wave number.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2000년도 춘계학술대회 논문집
• /
• pp.140-145
• /
• 2000

The spectral method which is composed of an eigenfunction expansion of free modes in the wave number domain is used to produce two dimensional unsteady inviscid wave simulation such as progressive waves in a numerical pneumatic wave tank. A spatial and time dependent free surface elevation and the potential are calculated by integrating ODE derived from fully nonlinear kinematic and dynamic free surface boundary condition at each time step. The nonlinear characteristics in the waves by this method were notable as increasing wave steepness. This method is very useful and powerful in terms of saving computational time caused by rapid convergence exponentially with increasing number of nodes, even preserving accurate numerical results. Moreover, it will given us many possibilities to apply to naval and ocean engineering fields.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2004년도 추계학술대회 논문집
• /
• pp.72-75
• /
• 2004

The present study describes a computational work to investigate detailed behaviors of the twin shock waves discharged from the exits of two-parallel ducts. In computations, the Yee-Roe-Davis's TVD scheme was used to solve the unsteady, three-dimensional, inviscid, compressible, Euler equations. The distance between two ducts is varied and the Mach number of the incident shock wave is changed below 2.0. The results obtained show that on the symmetric axis between two-parallel ducts, the maximum pressure achieved by the merge of twin shock waves and its location strongly depend upon the distance between two-parallel ducts and the Mach number of the incident shock wave. It is also found that the twin shock waves discharged from the exits of two-parallel ducts leads to the complicated flow fields, such as Mach stem, spherical waves, and vertical structures.

• 소음진동
• /
• 제10권6호
• /
• pp.1035-1040
• /
• 2000

The Impingement of a weak shock wave discharged from the open end of a shock tube upon a flat plate was investigated using shock tube experiments and numerical simulations. Harten-Yee Total Variation Diminishing method was used to solve axisymmetric, unsteady, compressible flow governing equations. Computations predicted the experimented results with a good accuracy. The peak pressure on the flat plate was not strongly dependent of the shock wave Mach number in the present range of Mach Number from 1.05 to 1.20. The distance between the plate and shock tube was changed to investigate the effect on the peak pressure. From both the results of experiments and computations we obtained a good empirical equation to predict the peak pressure on the flat plate.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.888-891
• /
• 2002

This paper presents the lubrication characteristics of a disk type wavy thrust bearing. The hydrodynamic pressure distributions in the fluid film are numerically solved the Reynolds equation and then the bearing load capacity and friction forces acting on the disk are calculated. Especially the effects of number and amplitude of the circumferential waves are investigated for tilted operating conditions. The results showed that the load capacity increases with wave amplitude and optimum wave number exists for given design conditions. Therefore the results can be applied to enhance the lubrication performance of thrust bearing adopted in the scroll compressor.

• 한국통신학회논문지
• /
• 제12권3호
• /
• pp.285-291
• /
• 1987

Seisimic wave가 지하 내부로 전파되어 갈 때 점차적으로 에너지를 상실함으로써 attenuation현상을 일으킨다. Seismic wave의 velocity를 complex number로 표시하여 실수부는 phase velocity, 허수부는 attenuation 상수로 하여 attenuation특성을 수치적으로 modeling하는 방법을 제시하였다. 이 방법은 주파수와 독립적으로 로그특성으로 감쇄해가는 매질 속에서의 파동의 전파를 modeling한다. 본 연구는 attenuation을 위치함수로 표시하여 순방향 및 역방향 numerical modeling에 응용하여 FFT계산때 발생하는 wrap-arround noise 를 효율적으로 제거함으로써 memory space를 절약하고 computing time을 감소시킬 수 있음을 잘 보여주고 있다.

• Computers and Concrete
• /
• 제24권6호
• /
• pp.499-511
• /
• 2019

In this paper, wave propagation of double-bonded Cooper-Naghdi micro sandwich cylindrical shells with porous core and carbon nanotube reinforced composite (CNTRC) face sheets are investigated subjected to multi-physical loadings with temperature dependent material properties. The governing equations of motion are derived by Hamilton's principle. Then, the influences of various parameters such as wave number, CNT volume fraction, temperature change, Skempton coefficient, material length scale parameter, porosity coefficient on the phase velocity of double-bonded micro sandwich shell are taken into account. It is seen that by increasing of Skempton coefficient, the phase velocity decreases for higher wave number and the results become approximately the constant. Also, by increasing of the material length scale parameter, the cut of frequency increases, because the stiffness of micro structure increases. The obtained results for this article can be used to detect, locate and quantify crack.

• Steel and Composite Structures
• /
• 제47권1호
• /
• pp.71-77
• /
• 2023

This paper presents a study on the wave propagation of functionally graded material (FGM) sandwich nanoplates with soft core resting on a Winkler foundation. The structure is modelled by classical theory. Motion equations are derived by the assumption of nonlocal Eringen theory and energy method. Then, the equations are solved using an exact method for finding phase velocity responses. The effects of Winkler foundation, nonlocal parameters, thickness and mode number on the dispersion of elastic waves are shown. With the increase of spring constant, the speed of wave propagation increases and reaches a uniform state at a higher wave number.

• 해양환경안전학회지
• /
• 제1권2호
• /
• pp.61-67
• /
• 1995

This study examines experimentally and theoretically, the wave deformation by two large cylindrical structure in relation to the case of one structure. The wave height around the structures varies, according to the changes of the incident wave angles, the number of the structure, and the distances between the two structures. The wave deformation around the large cylindrical structures is shown to be well predicted theoretically by the diffraction theory based on the singular point distribution method using a vertical line wave source Green's function.

• 한국음향학회지
• /
• 제15권6호
• /
• pp.47-51
• /
• 1996

실린더 운동방정식은 실린더 내에서 발생되는 소음 해석에 매우 중요하다. 그러므로, 지금까지 많은 학자들에 의해 실린더 운동방정식을 유도되었다[1]. 참고문헌[6]에서는, 새로 제안돈 실린더 운동방정식, Junger and Feit의 실린더 운동방정식 그리고 가정해에 의한 선형방정식으로, 실린더가 자유 운동을 할 때, 자유파수를 구하였다. 본 논문에서는 자유파수들의 분산곡선들을 이용하여, 두 실린더운동방정식을 비교하였고, 링주파수와 링확장주파수의 계산으로, 자유파수들의 분산곡선의 물리적인 의미를 부가하였다. 이 결과, 새로 유도된 실린더 운동방정식의 타당함을 보였다. 새로 제안된 실린더 운동 방정식을 이용하면, 산업현장에서, 실린더 내의 고체파에 대한 보다 정확한 분석을 할 수 있을 것으로 사료된다.