• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.34 no.6
• /
• pp.211-221
• /
• 2022

The wave runup height is one of the most important parameters for affecting the design of coastal structures such as dikes, revetments, and breakwaters. In this study, SWASH (Zijlema et al., 2011), a non-hydrostatic pressure numerical model, was used to analyze the effect of reducing The wave runup height of solitary waves by submerged and floating rectangular obstacles. It was confirmed that the SWASH model reproduces the propagation, breaking, and runup of solitary waves quite well. In addition, it was confirmed that the wave deformation of the solitary wave by submerged and floating rectangular obstacles was well reproduced. Finally, we conducted an examination of the effect of reducing the runup height of submerged and floating rectangular obstacles. Reduced runup heights are calculated and the characteristics of runup height reduction according to the dimensions of the obstacle were analyzed. The energy attenuation effect of the floating obstacle is greater than the submerged obstacle, and it is shown to be more effective in reducing the runup height.

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 2003.08a
• /
• pp.376-381
• /
• 2003

The reliability analysis of overtopping probability is proposed. In order to estimate the expected overtopping probability of the rubble mound breakwater, the experimental results of individual wave runup height is applied for the analysis of irregular wave system. The joint distribution of wave heights and periods is used for the input data of runup calculation because the runup height depends on the wave height and period. The runup heights during the one event that the design wave attacks the rubble mound breakwater extend to the one life cycle of 60 years. Utilizing the Monte-Carlo method, the one life cycle is tried more about 60 times for obtaining the expected value of overtopping probability. It is found that the inclusion of the variability of wave tidal and wave steepness has great influence on the computation of the expected overtopping probability of rubble mound breakwater. The previous design disregarding the tidal fluctuation largely overestimates or underestimates the expected overtopping probability depending on tidal range and wave steepness.

• Journal of Ocean Engineering and Technology
• /
• v.34 no.2
• /
• pp.128-135
• /
• 2020

When high waves and storm surge strike simultaneously, the characteristics of the fluid field change drastically from overtopping according to the wave runup height to overflow through a transition state that combines overtopping and overflows. However, an estimation model or evaluation method has not yet been established because there is not enough engineering data. This study developed a wave overtopping-overflow transition model based on a full-scale experiment involving wave overtopping and overflow transition, which appropriately reproduced the effect of waves or the temporal change in inundation flow. Using this model to perform a calculation for the wave overtopping and overflow transition process under typical circumstances, this study determined the wave runup height and features of the inundation flow under time series changes as an example.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.4
• /
• pp.845-852
• /
• 2015

The runup height is an important design parameter to determine the crest elevation of coastal structures and seawalls. In this study, two dimensional wave runup tests for rubble-mound structure covered by tetrapods were conducted. Incident waves at the toe include nonbreaking, breaking and broken random wave conditions. A empirical formula to predict runup elevation of rubble-mound structure with 1:1.5 front slope was proposed on the basis of physical model test results using a surf similarity parameter. The test results from this study were compared with those from van der Meer and Stam(1992).

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.26 no.6
• /
• pp.381-387
• /
• 2014

Recently the large-height swell-like waves generated in the eastern coast of South Korea have been observed frequently. The characteristics of the runup and overtopping of the large-height swell-like waves formed in deep water and attack the coast, causing damages to both lives and facilities have been studied. The correlation between spectral shape parameters and significant wave height has been investigated by analyzing long term wave spectrum data. Numerical runup experiments using MIKE21 BW Module were performed with $Q_p$, additional shape parameter, and identified the variations and characteristics of runup heights with respect to the variations of spectral shape.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.5
• /
• pp.1051-1059
• /
• 2015

Wave runup is one of the most important factors affecting the design of coastal structure exposed to wave attack. In this study, two dimensional laboratory tests were conducted under the different random wave conditions and structure configurations to develop a formula to predict runup heights. Rubble-mound structure consisted of tetrapod armour blocks with 1:1.5 and 1:2 slopes. The relative water depths (the ratio of the significant wave height to water depth at the toe) ranged from 0.14 to 0.56. The formula proposed here is applicable to surf similarity parameter ranging from 2 to 6. Runup heights on 1:2 slope were higher than those on 1:1.5 slope. Runup heights were reduced by 5% when the armour layer thickness increased two times.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.3 no.3
• /
• pp.163-169
• /
• 1991

Sixty seven regular wave tests were performed in a wave-current flume to investigate proper-ties of waves breaking on irregular slope profiles. In these tests, 1/10, 1/20 beach slopes were made using angles and plywoods. A little differences were found in such properties as breaker depth and height indices. runup for plane slopes comparing with other laboratory experiments. however. for smaller deepwater wave steepness, measured breaker height and depth data values were smaller than other formulas. On wave runup agreement was good between experiments and Hunt formula. however. measured data values were influenced by number of breaking. Significant differences were found in breaker depth index for plane and barred slopes. Wave height decay after breaking was found to be smaller than Dally et al.'s formula (1984).

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.35 no.4
• /
• pp.75-83
• /
• 2023

Apart from implementing hardware solutions like raising the crest freeboard of coastal structures to efficiently counter wave-overtopping, there is a simultaneous requirement for software-driven disaster mitigation strategies. These tactics involve the swift and accurate dissemination of wave-overtopping information to the inland regions of coastal zones, enabling the regulation of evacuation procedures and movement. In this study, a method was proposed to estimate wave-overtopping by utilizing the temporal variation of wave heights exceeding the structure's crown level, with the aim of developing an on-site wave measurement system for providing wave-overtopping information in the field. Laboratory model experiments were conducted on vertical seawall structures to measure wave-overtopping volumes and wave runup heights under different wave conditions and structural freeboard variations. By assuming that the velocity of water inundation on the top of the structure during wave-overtopping events is equivalent to the long-wave velocity, an overtopping discharge coefficient was introduced. This coefficient was utilized to estimate the rate of wave-overtopping based on the temporal changes in wave runup heights measured at the top of the structure. Upon reasonably calculating the overtopping discharge coefficient, it was verified that the estimation of wave-overtopping could be achieved solely based on the wave runup heights.

• Ocean Systems Engineering
• /
• v.12 no.4
• /
• pp.439-459
• /
• 2022

This paper describes experimental studies of impact pressure generated by breaking regular waves in shallow water on a vertical cylinder. Experimental work was carried out in a shallow water flume using a 1:30 - scale model of a vertical rigid circular hollow cylinder with a diameter 0.2 m. This represents a monopile for shallow water offshore wind turbines, subjected to depth induced breaking regular waves of frequencies of 0.8 Hz. The experimental setup included a 1 in 10 sloping bed followed by horizontal bed with a constant 0.8 m water depth. To determine the breaking characteristics, plunging breaking waves were generated. Free surface elevations were recorded at different locations between the wave paddle to the cylinder. Wave impact pressures on the cylinder at a number of elevations along its height were measured under breaking regular waves. The depth-induced wave breaking characteristics, impact pressures, and wave run-up during impact for various cylinder locations are presented and discussed.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.3B
• /
• pp.289-301
• /
• 2009

In this work, wave run-up heights and resultant wave forces on a vertical revetment due to tsunami (solitary wave) are investigated numerically using a numerical wave tank model called CADMAS-SURF (CDIT, 2001. Research and Development of Numerical Wave Channel (CADMAS-SURF). CDIT library, No. 12, Japan.), which is based on a 2-D Navier-Stokes solver, coupled to a volume of fluid (VOF) method. The third order approximate solution (Fenton, 1972. A ninth-order solution for the solitary wave. J. of Fluid Mech., Vol. 53, No.2, pp.257-271) is used to generate solitary waves and implemented in original CADMAS-SURF code. Numerical results of the wave profiles and forces are in good agreements with available experimental data. Using the numerical results, the regression curves determined from the least-square analysis are proposed, which can be used to determine the maximum wave run-up height and force on a vertical revetment due to tsunami. In addition, the capability of CADMAS-SURF is demonstrated for tsunami wave forces acting on an onshore structure using various configuration computations including the variations of the crown heights of the vertical wall and the position of the onshore structure. Based on the numerical results such as water level, velocity field and wave force, the direct effects of tsunami on an onshore structure are discussed.