• Geophysics and Geophysical Exploration
• /
• v.10 no.3
• /
• pp.183-190
• /
• 2007

The site effects of seismic stations were evaluated by conducting a simultaneous inversion of the stochastic point-source ground-motion model (STGM model; Boore, 2003) parameters based on the accumulated dataset of horizontal shear-wave Fourier spectra. A model parameter $K_0$ and frequency-dependent site amplification function A(f) were used to express the site effects. Once after a H/V ratio of the Fourier spectra was used as an initial estimate of A(f) for the inversion, the final A(f) which is considered to be the result of combined effect of the crustal amplification and loca lsite effects was calculated by averaging the log residuals at the site from the inversion and adding the mean log residual to the H/V ratio. The seismic stations were classified into five classes according to $logA_{1-10}^{max}$(f), the maximum level of the site amplification function in the range of 1 Hz < f < 10 Hz, i.e., A: $logA_{1-10}^{max}$(f) < 0.2, B: 0.2 $\leq$ $logA_{1-10}^{max}$(f) < 0.4, C: 0.4 $\leq$ $logA_{1-10}^{max}$(f) < 0.6, D: 0.6 $\leq$ $logA_{1-10}^{max}$(f) < 0.8, E: 0.8 $\leq$ $logA_{1-10}^{max}$(f). Implication of the classified result was supported by observing a shift of the dominant frequency of average A(f) for each classified stations as the class changes. Change of site classes after moving seismic stations to a better site condition was successfully described by the result of the station classification. In addition, the observed PGA (Peak Ground Acceleration)-values for two recent moderate earthquakes were well classified according to the proposed station classes.

• Journal of Oral Medicine and Pain
• /
• v.30 no.1
• /
• pp.69-77
• /
• 2005

The purposes of this study were to develop and introduce a novel intraoral appliance for bruxism composed of power switch and biofeedback device and further to examine inter- and intra-reliability of the appliance prior to clinical tests. The newly-developed appliance consisted of detection sensors, a central processing unit (CPU), a reactor and a storage unit and a displayer. Compact-sized, waterproof switches were selected as bruxism detection sensor and any sensor activation by clenching or grinding event was processed at the CPU and transmitted, by radio wave, to the reactor and storage unit and triggered auditory or vibratory signal, subsequently producing biofeedback to the patient with bruxism. The data on bruxing event in the storage unit can be displayed on the computer, making it possible analyzing frequency, duration and nature of bruxism. Cast models were obtained from ten volunteers with normal occlusion to evaluate reliability of the appliances. For inter-operator reliability on the intraoral appliances, each operator of the two fabricated the appliance for the same subject and compared the minimal contact forces provoking auditory biofeedback reaction in vertical, lateral and central directions. Intra-operator reliability was also investigated on the appliances made by a single operator at two separate times with an interval of two days. Conclusively, the newly-developed appliance is compact and safe to use in oral circumstance and easy to make. Furthermore, it had to be proven reliability excellent enough to apply in clinical settings. Thus, it is assumed that this appliance with the processor and the storage of data and auditory or vibratory biofeedback function is available and useful to analyze and control bruxism.

• Applied Chemistry for Engineering
• /
• v.25 no.1
• /
• pp.78-83
• /
• 2014

In this research, we evaluated the performance and characteristics of carbon supported PtM (M = Ni and Y) alloy catalysts (PtM/Cs) synthesized by a modified polyol method. With the PtM/Cs employed as a catalyst for the oxygen reduction reaction (ORR) of cathodes in proton exchange membrane fuel cells (PEMFCs), their catalytic and ORR activities and electrical performance were investigated and compared with those of commercial Pt/C. Their particle sizes, particle distributions and electrochemically active surface areas (EAS) were measured by TEM and cyclic voltammetry (CV), while their ORR activity and electrical performance were explored using linear sweeping voltammetries with rotating disk electrodes and rotating ring-disk electrodes as well as PEMFC single cell tests. TEM and CV measurements show that PtM/Cs have the compatible particle size and EAS with Pt/C. When it comes to ORR activity, PtM/C showed the equivalent or better half-wave potential, kinetic current density, transferred electron number per oxygen molecule and $H_2O_2$ production(%) to or than commerical Pt/C. Based on results gained by the three electrode tests, when the PEMFC single cell tests were carried out, the current density measured at 0.6 V and maximum power density of PEMFC single cell adopting PtM/C catalysts were better than those adopting Pt/C catalyst. It is therefore concluded that PtM/C catalysts synthesized by modified polyol can result in the equivalent or better ORR catalytic capability and PEMFC performance to or than commercial Pt/C catalyst.

• Korean Journal of Social Welfare Studies
• /
• no.36
• /
• pp.55-80
• /
• 2008

Research on the welfare state or income inequality has been concerned with variations in inequality between societies or families. These studies tend to view the family as a unit of shared interests where incomes are pooled and distributed equally. This study makes a theoretical and empirical case for why it is important to look at economic dependency within the family in comparative welfare state research. Using the Luxembourg Income Study data this study examined married women's dependency on their husbands' earnings in 16 western industrialized countries. The constructed measure for married women's level of economic dependency followed the procedure of Sørensen & McLanahan(1987), which stated : "her dependency is measured by the extent to which a woman's standard of living(as determined by her share of income) is derived from a transfer from her husband." The finding suggested that married women's economic dependence was lowest in Scandinavian countries. On the contrary, in Southern Europe countries most married women were dependent on husbands' earnings. In Netherlands, Austria, Germany where the share of part-time work among married women was high, married women's economic dependence was also high. This showed the women's labor force participation did not mean that the majority of couples were equal with respect to earnings, nor that a major shift in the sexual division of labour has taken place. This paper analysed the causal relationship between the married women's economic independence and the welfare state by using Ragin(2000)'s Fuzzy-Set Qualitative Comparative Analysis. This analysis considered the various conditions of the welfare state : namely, left power, union mobilization density, women's mobilization, public service sector employment and generous support on the family. The result showed that powerful union, high level of women's mobilization and the generous support on the family were necessary conditions for 'relatively high' level of married women's economic independence.

• Journal of the Microelectronics and Packaging Society
• /
• v.28 no.3
• /
• pp.1-7
• /
• 2021

In this paper, by embedding a bare-die chip-type drive amplifier into the PCB composed of ABF and FR-4, it implements an embedded active device that can be applied in 28 GHz band modules. The ABF has a dielectric constant of 3.2 and a dielectric loss of 0.016. The FR-4 where the drive amplifier is embedded has a dielectric constant of 3.5 and a dielectric loss of 0.02. The proposed embedded module is processed into two structures, and S-parameter properties are confirmed with measurements. The two process structures are an embedding structure of face-up and an embedding structure of face-down. The fabricated module is measured on a designed test board using Taconic's TLY-5A(dielectric constant : 2.17, dielectric loss : 0.0002). The PCB which embedded into the face-down expected better gain performance due to shorter interconnection-line from the RF pad of the Bear-die chip to the pattern of formed layer. But it is verified that the ground at the bottom of the bear-die chip is grounded Through via, resulting in an oscillation. On the other hand, the face-up structure has a stable gain characteristic of more than 10 dB from 25 GHz to 30 GHz, with a gain of 12.32 dB at the center frequency of 28 GHz. The output characteristics of module embedded into the face-up structure are measured using signal generator and spectrum analyzer. When the input power (P_in) of the signal generator was applied from -10 dBm to 20 dBm, the gain compression point (P_1dB) of the embedded module was 20.38 dB. Ultimately, the bare-die chip used in this paper was verified through measurement that the oscillation is improved according to the grounding methods when embedding in a PCB. Thus, the module embedded into the face-up structure will be able to be properly used for communication modules in millimeter wave bands.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.50 no.1
• /
• pp.33-52
• /
• 2022

The History and Culture Park and the Lee Kun-hee Donation Hall will be built in Songhyeon-dong, Seoul. Political games from the Joseon Dynasty to the present greatly influenced the historicity of Songhyeon-dong. However, place analysis was limited to changes in landowners and land uses rather than a historical context. Therefore, this study analyzed the context in which the placeness of Songhyeon-dong changed according to the emergence of cultural hegemony using the perspective of modern cultural geography and comparative history. As a result of the analysis, cultural hegemony in historical transitions, such as Sinocentrism, maritime expansion, civil revolutions, imperialism, nationalism, popular art, and neoliberalism, was found to have created new intellectuals in Bukchon, including Songhyeon-dong, and influenced social systems and spatial policies. In this social relations, the placeness of Songhyeon-dong changed as follows. First, the founding forces of Joseon created pine forests as Bibo Forests to invocate the permanence of the dynasty. In the late Joseon dynasty, it was an era of maritime expansion, and as Joseon's yeonhaeng increased, a garden for the Gyeonghwasejok, who enjoyed the culture of the Qing dynasty, was built. Although pine forests and gardens disappeared due to the development of housing complexes as the population soared during the Japanese colonial era, Cha Gyeong's landscape aesthetics, which harmonized artificial gardens and external nature, are worth reinterpreting in modern times. Second, the wave of modernization created a new school in Bukchon and a boarding house in Songhyeon-dong owned by a pro-Japanese faction. Angukdongcheon-gil, next to Songhyeon-dong, was where thinkers who promoted civil revolution and national self-determination exchanged ideas. Songhyeon-dong, the largest boarding house, served as a residence for students to participate in the March 1st Movement and was the cradle of the resulting culture of student movements. The appearance of the old road is preserved, so it is a significant part of the regeneration of walking in the historic city center, connecting Gwanghwamun-Bukchon-Insadong -Donhwamunro. Third, from the cultural rule of the Government General of Joseon to the Military Government, Songhyeon-dong acted as a passage to western culture with the Joseon Siksan Bank's cultural housing and staff accommodations at the U.S. Embassy. Ancient and contemporary art coexisted in the surrounding area, so the modern and contemporary art market was formed. The Lee Kun-hee Donation Hall is expected to form a cultural belt for citizens with the gallery, Bukchon Hanok Village, the Craft Museum, and the Modern Museum of Art. Discourses and challenges are needed to recreate the place in harmony with the forests, gardens, the street of citizens' birth, history and culture park, the art museum, and the surrounding walking network.

• Economic and Environmental Geology
• /
• v.39 no.4 s.179
• /
• pp.369-384
• /
• 2006

Korean Peninsula, located on the southeastern part of Eurasian plate, belongs to the intraplate region. The characteristics of intraplate earthquake show the low and rare seismicity and the sparse and irregular distribution of epicenters comparing to interplate earthquake. To evaluate the exact seismic activity in intraplate region, long-term seismic data including historical earthquake data should be archived. Fortunately the long-term historical earthquake records about 2,000 years are available in Korea Peninsula. By the analysis of this historical and instrumental earthquake data, seismic activity was very high in 16-18 centuries and is more active at the Yellow sea area than East sea area. Comparing to the high seismic activity of the north-eastern China in 16-18 centuries, it is inferred that seismic activity in two regions shows close relationship. Also general trend of epicenter distribution shows the SE-NW direction. In Korea Peninsula, the first seismic station was installed at Incheon in 1905 and 5 additional seismic stations were installed till 1943. There was no seismic station from 1945 to 1962, but a World Wide Standardized Seismograph was installed at Seoul in 1963. In 1990, Korean Meteorological Adminstration(KMA) had established centralized modem seismic network in real-time, consisted of 12 stations. After that time, many institutes tried to expand their own seismic networks in Korea Peninsula. Now KMA operates 35 velocity-type seismic stations and 75 accelerometers and Korea Institute of Geoscience and Mineral Resources operates 32 and 16 stations, respectively. Korea Institute of Nuclear Safety and Korea Electric Power Research Institute operate 4 and 13 stations, consisted of velocity-type and accelerometer. In and around the Korean Peninsula, 27 intraplate earthquake mechanisms since 1936 were analyzed to understand the regional stress orientation and tectonics. These earthquakes are largest ones in this century and may represent the characteristics of earthquake in this region. Focal mechanism of these earthquakes show predominant strike-slip faulting with small amount of thrust components. The average P-axis is almost horizontal ENE-WSW. In north-eastern China, strike-slip faulting is dominant and nearly horizontal average P-axis in ENE-WSW is very similar with the Korean Peninsula. On the other hand, in the eastern part of East Sea, thrust faulting is dominant and average P-axis is horizontal with ESE-WNW. This indicate that not only the subducting Pacific Plate in east but also the indenting Indian Plate controls earthquake mechanism in the far east of the Eurasian Plate. Crustal velocity model is very important to determine the hypocenters of the local earthquakes. But the crust model in and around Korean Peninsula is not clear till now, because the sufficient seismic data could not accumulated. To solve this problem, reflection and refraction seismic survey and seismic wave analysis method were simultaneously applied to two long cross-section traversing the southern Korean Peninsula since 2002. This survey should be continuously conducted.