• Journal of the Korean Society of Costume
• /
• v.62 no.6
• /
• pp.154-164
• /
• 2012

The purpose of this study was to investigate the modernizations of traditional Saekdong by analyzing the magazines from the 1955 to 1995. The application of Saekdong extended during the 1950s. Before, Saekdong was only used for children; however, women were wearing it during this period. With the advancement of the fabric industry in the 1960s, a great popularity of Saekdong was witnessed and its application extended even further. During the 1970s, the Saekdong was applied in westernized clothes; however, the 1980s was a time of renaissance for Saekdong as the awakening of national identity movement began. The application of Saekdong in westernized clothes became more popular during the 1990s as the widespread of industrial designing was inspired by the tradition. The functional aspect of Saekdong such as recycling the leftover fabrics decreased over the years whereas the decorative aspect increased. The form of Saekdong became more variant. The Saekdong was applied either as a part or whole of the clothes. With the development of the mechanically woven Saekdong, various widths and forms of Saekdong, not only vertical lines but also diagonal and wave lines, appeared. The colors also changed. During the 1990s, low chroma and gradation methods were applied. Gold and silver threads also were woven together. The motifs were created and gilts were printed on Saekdong.

• Investigative Magnetic Resonance Imaging
• /
• v.24 no.3
• /
• pp.95-122
• /
• 2020

In this article, we evaluated the performance of radiofrequency (RF) coils in terms of the signal-to-noise ratio (S/N) and homogeneity of magnetic resonance images when used for ultrahigh-frequency (UHF) 7T magnetic resonance imaging (MRI). High-quality MRI can be obtained when these two basic requirements are met. However, because of the dielectric effect, 7T magnetic resonance imaging still produces essentially a non-uniform magnetic flux (|B₁|) density distribution. In general, heterogeneous and homogeneous RF coils may be designed using electromagnetic (EM) modeling. Heterogeneous coils, which are surface coils, are used in consideration of scalability in the |B₁| region with a high S/N as multichannel loop coils rather than selecting a single loop. Loop coils are considered state of the art for their simplicity yet effective |B₁|-field distribution and intensity. In addition, combining multiple loop coils allows phase arrays (PA). PA coils have gained great interest for use in receiving signals because of parallel imaging (PI) techniques, such as sensitivity encoding (SENSE) and generalized autocalibrating partial parallel acquisition (GRAPPA), which drastically reduce the acquisition time. With the introduction of a parallel transmit coil (pTx) system, a form of transceiver loop arrays has also been proposed. In this article, we discussed the applications and proposed designs of loop coils. RF homogeneous coils for volume imaging include Alderman-Grant resonators, birdcage coils, saddle coils, traveling wave coils, transmission line arrays, composite right-/left-handed arrays, and fusion coils. In this article, we also discussed the basic operation, design, and applications of these coils.

• Journal of the Korean Applied Science and Technology
• /
• v.30 no.1
• /
• pp.49-56
• /
• 2013

Excellent electron transport properties with enhanced light scattering ability for light harvesting have made well-ordered one dimensional $TiO_2$ nanotube(TNT) arrays an alternative candidate over $TiO_2$ nanoparticles in the area of solar energy conversion applications. The principal drawback of TNT arrays being activated only by UV light has been addressed by coupling the TNT with secondary materials which are visible light-triggered. As well as extending the absorption region of sunlight, the introduction of these foreign components is also found to influence the charge separation and electron lifetime of TNT. In this study, a novel method to fabricate the TNT-based composite photoelectrodes employing visible responsive $CuInS_2$ (CIS) nanoparticles is presented. The developed method is a square wave pulse-assisted electrochemical deposition approach to wrap the inner and outer walls of a TNT array with CIS nanoparticles. Instead of coating as a dense compact layer of CIS by a conventional non-pulsed-electrochemical deposition method, the nanoparticles pack relatively loosely to form a rough surface which increases the surface area of the composite and results in a higher degree of light scattering within the tubular channels and hence a greater chance of absorption. The excellence coverage of CIS on the tubular $TiO_2$ allows the construction of an effective heterojunction that exhibits enhanced photoelectrochemical performance.

• Journal of Labour Economics
• /
• v.30 no.1
• /
• pp.109-137
• /
• 2007

One of the key features of the Korean labor market is that, even though the central axis of employment has shifted from manufacturing sector to service sector, the ratio of part-time work is very low. Its major reasons are low wage rate, insufficient fringe benefits including social insurance, and deficient job security, even though part-time work has positive characteristics. This study examines whether part-time work would be a decent one and an alternative to full-time work by answering two questions: one is who chooses part-time work and another is whether part-time work is satisfactory. Analyses of 3,971 wage workers in the 8th wave of the Korea Labor and Income Panel Survey reveal that, as expected, part-time work is prevalent among the young, married women, and the old supporting the results from previous studies and that choosing part-time work on one's initiatives has a significant positive effect on job satisfaction for women while it is not for men. Form the result, it can be concluded that part-time work can be an appropriate alternative for full-time work if one chooses it voluntarily.

• Journal of the Korean Chemical Society
• /
• v.33 no.6
• /
• pp.614-622
• /
• 1989

The electrochemical reduction of ${\alpha},{\beta}$-dibenzyl N-benzylidene L-aspartate in 0.1M LiCl ethanol solution was investigated by direct current (DC), differential pulse (DP) polarography, cyclic voltammetry and controlled potential coulometry(CPC). The irreversible reductive amination of imino group proceeded to form ${\alpha},{\beta}$-dibenyl N-benzyl L-aspartate by CEC or CE electrochemical reaction mechanism at the first reduction step (-0.92 volts vs. Ag-AgCl). The polarographic reduction wave was slightly suppressed due to inhibitory effect of micelle, while the irreversibility was increased according to the increase of Triton X-100 concentration. Upon the basis of product analysis and polarogram interpretation with pH change, possible CE electrode reaction mechanism was suggested.

• 한국연소학회:학술대회논문집
• /
• 2003.12a
• /
• pp.103-108
• /
• 2003

The effect of equivalence ratio and fuel/air mixing quality on the phase-resolved gas temperatures at different phases of the oscillating pressure cycle was experimentally investigated. An atmospheric pressure, optically accessible and laboratory-scale dump combustor operating on methane with heat release rate of 1.59kW was used. Temperature measurements were made using coherent anti-Stokes Raman spectroscopy (CARS) at several spatial locations for typical unstable combustion conditions. Analysis was conducted using parameters such as phase-resolved averaged temperature, normalized standard deviation and temperature probability distribution functions (PDFs). Also the probability on the occurrence of high temperature (over 1900K) was investigated to get the information on the perturbation of equivalence ratio and NOx emission characteristics. It was shown that most of temperature histograms exhibit Gaussian profile which has short breadth of temperature fluctuation at equivalence ratio of 0.6, while beta profile was predominant for the cases of other equivalence ratios (${\Phi}$=0.55, 0.50). The characteristics on the occurrence of high temperature also displayed periodic wave form which is very similar to the pressure signal. And the amplitude of this profile goes larger as the fuel/air mixing quality become poorer. These also provided additional information on the perturbation of equivalence ratio at flame as well as NOx emission characteristics.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.12 no.1
• /
• pp.63-69
• /
• 2016

Although the previous information technologies had been used for the quick and accurate processing of work, At present, however, as the combination with the Internet, the IOT(Internet-of-Things) era in which the diverse pieces of information are collected and handled through the sensor networks is in progress. Among these application fields of the IoT, the indoors position identification technology has been developing in the direction of providing the position information in the buildings of which the lengths and the interiors are complicated and in the direction of providing the various pieces of information and others of the like to the nearby customers. In this paper, we proposed an indoors position identification system that detects the patrol positions of the prison officers in the correctional facilities and in the prisons by using the ultrasonic waves, that transmits these to the control system and the data gateway, and that transmits the detected data. The Indoors Positioning identification System is organized with the tags for recognizing the positions that transmit the ultrasonic signal, ultrasonic receiver and data gateway. And the indoors position information data were transmitted to the management system through the data gateway. We evaluated the transmission error, by changing the distance of the proposed system for location recognition tag and the receiver, As a result, we found out that, when the transmission distance was 10 cm or less, the errors occurred in the form of the distortions. And when it was 110 cm or more, the transmission errors occurred due to the propagation diminutions of the ultrasonic wave signals. And when the transmission distance was from 10 cm to 100 cm, it was shown that the proposed system was possible without any errors.

• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.11
• /
• pp.517-527
• /
• 1997

Magnetic Resonance Spectroscopic Imaging is a methodology combining the imaging and spectroscopy. It can provide the spectrum of each areas of image so that one can easily compare the spectrum of one position to another position of the image. In this study, we developed pulse sequence or the spectroscopic imaging method, RF wave forms or the saturation of water signal, computer simulations to validate our method, and confirmed the methodology with phantom experiment. Then we applied the spectroscopic method to human subject and identified a few important metabolites in in vivo. To develope a water saturating RF waveform, we used Shinnar-Le-Roux algorithm and obtained maximum phase RF waveform. With this RF pulse, it could suppress the water signal to 1:1000. The magnet is shimmed to under 1.0ppm with auto-shimming technique. The saturation bandwidth is 80Hz(2ppm). The water and fat seperation is 3.3ppm(about 140Hz at 1 Tesla magnet), the bandwidth is enough to resolve the difference. But we are more concerned about the narrow window in between the two peaks, in which the small quantity of metabolites reside. We performed the computer simulation and phantom experiments in 8*8 matrix form and showed good agreement in the image and spectrum. Finally we applied spectroscopic imaging to the brain of human subject. Only the lipid signal was shown in the periphery region which agrees with the at distribution in human head surface area. The spectrum inside the brain shows the important metabolites such as NAA, Cr/PCr, Choline. We here have shown the spectroscopic imaging which is normally done above 1.5 Tesla machine can be performed in the 1 Tesla Magnetic Resonance Imaging Unit.

• Journal of Society of Preventive Korean Medicine
• /
• v.9 no.2
• /
• pp.93-106
• /
• 2005

A survey was performed for 2 weeks in October 2004 in order to examine the effects and changes of far infrared and anion of office workers aged 40 and older before and after wearing the underwear. In the survey, questionnaires and photoplethysmography were used to measure the difference between the two tests conducted with one week interval. The findings could be summed up as follows: 1. There was no statistically significant difference in changes of vascular aging points and photoplethysmogram wave form before and after wearing the far infrared and anion underwear but the points showed the increasing tendency(p>0.05). 2. A statistically significant difference was confirmed since the total points of each item in the questionnaires increased after wearing the underwear(p<0.001). 3. In connection with the systemic symptoms, a significant difference was found with increased points in all items except for no. 6 after wearing the underwear(p<0.05). 4. With regard to the difference before and after wearing the underwear depending on the Kidney symptoms, there was a significant difference with increased points in all items except for item no. 1 after wearing the underwear(p<0.05). In conclusion, to put on the underwear with effect of far infrared and anion is believed to smooth metabolism and blood circulation, contributing by thus to promoting health and preventing disease. Further studies with wider sampling of subjects are requested to diversify and refine the findings from this sectional study.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.8
• /
• pp.55-62
• /
• 2006

This paper presents experimental evaluation of an insect-mimicking flapping-wing device actuated by a unimorph piezoceramic actuator. Length of each rod and hinge point in the linkage/amplification system are carefully chosen such that the resulting wing motion can mimic clapping of wings in a real insect at the end of upstroke. In addition to this, a pair of corrugated wings are fabricated mimicking zig-zag cross section of a real insect wing. Thanks to the two additional implementation, the improved flapping wing device can generate a larger lift force than the previous model even though area of the new wing is about 50% less than that of the previous wing. In this work, effects of the wing clapping, the wing corrugation, and the input wave form on the lift force generation have been also experimentally investigated. Finally, the vortex generated by the flapping device has been captured by a high speed camera, showing that vortices are produced during up- and down-strokes.