• 제목/요약/키워드: wave attenuation

검색결과 471건 처리시간 0.021초

A Study on the Evaluation of Mterial Degradaion for 2.25Cr-1Mo Steel using Ultrasonic Attenuation Characterization

  • Kim, Chung-Soek;Park, Ik-Keun;Park, Un-Su;Kim, Hyun-Mook;Kwun, Sook-In;Byeon, Jai-Won
    • 한국공작기계학회:학술대회논문집
    • /
    • 한국공작기계학회 2001년도 추계학술대회(한국공작기계학회)
    • /
    • pp.319-323
    • /
    • 2001
  • In significant number of energy-related facilities for like thermal power plant or petro-chemical industry, CrMo steels are widely used energy conversion industries. However, these materials undergo precipitation of carbides or intermetallic compounds into grain boundary and change of internal microstructure such as coarsening of precipitation, decrease of solute elements and impurity segregation under more severe service conditions, which results in deterioration of inherent superior material characteristics. In this study, it was verified experimentally the feasibility of the aging degradation evaluation for degraded 2.25Cr-lMo steel specimens prepared by isothermal aging heat treatment at 63$0^{\circ}C$ by high frequency longitudinal ultrasonic and surface SH wave investigating the change of attenuation coefficient analyzed by spectral analysis. Attenuation coefficient had a tendency to increase as degradation proceeded.

  • PDF

감쇄극을 갖는 초소형 적층 LTCC 대역통과 필터 (Miniature Multilayer LTCC Bandpass Filter with Attenuation poles)

  • 이영신;송희석;방규석;김준철;박종철
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
    • /
    • pp.751-755
    • /
    • 2003
  • In this paper, We proposed compact multi-layer LTCC (Low Temperature Cofired Ceramic) bandpass filter for Bluetooth module. A ${\lambda}/4$ coupled stripline resonators are designed, which composed of coupled strip-line section and loading capacitance. This resonator with a loading capacitor has slow-wave characteristics. Due to the slow-wave effect of the proposed resonator, it is possible to design and fabricate a compact bandpass filter with a wide upper stop band. Attenuation poles in the lower stop band are achieved using controlling of electro-magnetic coupling between resonators. Using multi-layer LTCC technology, we designed and fabricated band pass filter with a finite attenuation pole and wide upper stopband. The overall size of the filter is $1.2{\times}2.0{\times}1.0mm^3$.

  • PDF

밀도성층을 통과하는 수면파 및 내부파의 전파특성 (Characteristics of Surface and Internal Wave Propagation through Density Stratification)

  • 이우동;허동수
    • 대한토목학회논문집
    • /
    • 제36권5호
    • /
    • pp.819-830
    • /
    • 2016
  • 아직까지 밀도성층을 통과하는 파랑변형에 관한 동수학적 특성에 대해서 명확히 밝혀진 부분은 그다지 많지 않다. 따라서 본 연구에서는 2층 밀도성층을 통과하는 파랑의 수리특성을 수치적으로 해석하기 위하여 온도와 염분에 따른 밀도류를 해석할 수 있게 개량된 3차원 수치파동수조(LES-WASS-3D ver. 2.0)를 이용하여 수치시뮬레이션을 수행하였다. 그리고 이용하는 수치파동수조의 타당성 및 유효성을 확인하기 위하여 Stokes 3차 파랑이론에 근거한 내부파형을 비교 검토하였다. 수치시뮬레이션 결과로부터 밀도성층을 통과하는 수면파 및 내부파의 파고가 감소하는 현상을 알 수 있었으며, 이것은 상 하층의 밀도차이에 기인한 전파속도 차이로 인하여 계면에서 강한 와도가 발생하기 때문으로 확인되었다. 또한 밀도성층의 밀도차이가 증가할수록, 상 하층의 수심비가 증가할수록(상층의 수심이 깊어질수록) 와도가 강하게 발생하여 수면파 및 내부파의 파고감쇠를 심화시키는 것을 확인할 수 있었다.

Peak ground acceleration attenuation relationship for Mazandaran province using GEP algorithm

  • Ahangari, Hamed Taleshi;Jahani, Ehsan;Kashir, Zahra
    • Earthquakes and Structures
    • /
    • 제15권4호
    • /
    • pp.403-410
    • /
    • 2018
  • The choice of attenuation relationships is one of the most important parts of seismic hazard analysis as using a different attenuation relationship will cause significant differences in the final result, particularly in near distances. This problem is responsible for huge sensibilities of attenuation relationships which are used in seismic hazard analysis. For achieving this goal, attenuation relationships require a good compatibility with the target region. Many researchers have put substantial efforts in their studies of strong ground motion predictions, and each of them had an influence on the progress of attenuation relationships. In this study, two attenuation relationships are presented using seismic data of Mazandaran province in the north of Iran by Genetic Expression Programming (GEP) algorithm. Two site classifications of soil and rock were considered regarding the shear wave velocity of top 30 meters of site. The quantity of primary data was 93 records; 63 of them were recorded on rock and 30 of them recorded on soil. Due to the shortage of records, a regression technique had been used for increasing them. Through using this technique, 693 data had been created; 178 data for soil and 515 data for rock conditions. The Results of this study show the observed PGA values in the region have high correlation coefficients with the predicted values and can be used in seismic hazard analysis studies in the region.

초음파 감쇠가 원형관의 공명 산란에 미치는 영향 (The Effects of Material Attenuation on Acoustic Resonance Scattering from Cylindrical Tubes)

  • 이종포;최명선;주영상;임형택
    • 비파괴검사학회지
    • /
    • 제14권1호
    • /
    • pp.23-31
    • /
    • 1994
  • 재회의 초음파 감쇠가 유체속의 원형관으로부터의 공명 산란 특성에 미치는 영향을 분석하였다. 이를 위하여, 실수 파수 대신에 복소수의 허수부가 초음파 감쇠를 나타내는 복소수 파수(complex wave numbers)를 도입하였다. 유체가 들어있는 원형관에 대해 재료의 감쇠를 고려했을 때, 연속 평면파에 의한 물속에서의 공명 산란 특성을 분석하는 수치 해석 프로그램을 완성하였다. 프로그램의 타당성을 검증하기 위하여 감쇠를 무시한 경우의 수치 해석 결과를 기 보고된 수치 해석 결과와 비교하였다. 알루미늄 및 아크릴 원형관의 감쇠가 이들 원형관의 산란 특성에 미치는 영향을 해석한 결과, 공명피크의 폭이 좁고 예리할수록, 또한 $k_{1{\alpha}}$가 클수록 감쇠의 영향이 뚜렷하였다. 원형관의 공명 산란 특성이 초음파 감쇠에 크게 좌우되었다.

  • PDF

초음파 특성을 이용한 경년열화 평가 (Aging Degradation Assessment of Materials by Ultrasonic Characterization)

  • 박은수;박익근;김덕희;안형근
    • 비파괴검사학회지
    • /
    • 제22권2호
    • /
    • pp.149-154
    • /
    • 2002
  • 실제 사용 온도 보다 높은 $630^{\circ}C$에서 열처리 시간을 변수로 하여 최대 1000 시간 동안 등온 열처리를 통해 2.25Cr-1Mo 강의 경년열화재를 제작하고 열화에 따른 미세조직과 기계적 특성 변화에 대한 초음파 비파괴평가 법으로 표면 특성평가에 우수한 표면 SH파를 적용하였다. 열화에 따른 초음파의 감쇠와 전파시간 및 웨이블렛을 이용한 음속과 감쇠계수의 주파수 의존성평가를 수행한 결과 열화가 진행됨에 따라서 탄화물은 점차 조대화되고 경도는 감소하였다. 감쇠계수는 열화시간이 증가함에 따라서 증가하였고 전파시간 역시 열화의 초기단계에 급격히 증가했다. 초음파의 감쇠와 경도와는 좋은 상관관계를 나타내어 감쇠계수는 경년열화 평가에 중요한 파라미터임을 알 수 있었다.

반사파가 있는 관내의 능동 소음제어 (Active Noise Control in a Duct With Reflected Wave)

  • 오상헌;김양한
    • 소음진동
    • /
    • 제4권2호
    • /
    • pp.187-198
    • /
    • 1994
  • This study is to describe the effects of the duct termination conditions conditions upon the active noise attenuation system. The adaptive filtering algorithm using FIR filter is implemented for duct noise attenuation. To avoid the instability caused by the acoustic feedback, two methods are considered. One is to use a compensating FIR filter. The other is to utilize uni-directional detecting microphone and uni-directional control speaker. Experimental results show that the reflections of sound from duct terminations greatly reduce the performance of ANC system. The directionality of detecting microphone and control speaker is a major factor to decide ANC performance. When there are some reflections from both duct terminations, the noise attenuation using finite FIR filter is not enough to model the duct plant. Especially, the reflection from the upstream termination reduces the noise attenuation in the frequencies related to the distance between control speaker and upstream termination. The performance of the noise attenuation is found to be largely enhanced by using uni-directional coupler, both on detecting microphone and control speaker, even if the duct system has an arbitrary termination conditions.

  • PDF

Advances in Ultrasonic Testing of Austenitic Stainless Steel Welds

  • Moysan, J.;Ploix, M.A.;Corneloup, G.;Guy, P.;Guerjouma, R. El;Chassignole, B.
    • 비파괴검사학회지
    • /
    • 제28권3호
    • /
    • pp.245-253
    • /
    • 2008
  • A precise description of the material is a key point to obtain reliable results when using wave propagation codes. In the case of multipass welds, the material is very difficult to describe due to its anisotropic and heterogeneous properties. Two main advances are presented in the following. The first advance is a model which describes the anisotropy resulting from the metal solidification and thus the model reproduces an anisotropy that is correlated with the grain orientation. The model is called MINA for modelling anisotropy from Notebook of Arc welding. With this kind of material model1ing a good description of the behaviour of the wave propagation is obtained, such as beam deviation or even beam division. But another advance is also necessary to have a good amplitude prediction: a good quantification of the attenuation, particularly due to grain scattering, is also required as far as attenuation exhibits a strong anisotropic behaviour too. Measurement of attenuation is difficult to achieve in anisotropic materials. An experimental approach has been based both on the decomposition of experimental beams into plane waves angular spectra and on the propagation modelling through the anisotropic material via transmission coefficients computed in generally triclinic case. Various examples of results are showed and also some prospects to continue refining numerical simulation of wave propagation.

다중채널 표면파 자료를 이용하여 구한 S파 속도와 감쇠지수 구조: 낙동강 하구의 연약 지반 특성 (S-wave Velocity and Attenuation Structure from Multichannel Seismic surface waves: Geotechnical Characteristics of NakDong Delta Soil)

  • 정희옥
    • 한국지구과학회지
    • /
    • 제25권8호
    • /
    • pp.774-783
    • /
    • 2004
  • 다중채널 탄성파 자료를 이용하여 낙동강 하구 삼각주 지역 연약지반의 지반 특성을 구하기 위하여 S파 속도와 Q$s^{-1}$ 구조를 구하고 이를 시추조사 결과와 비교하였다. 다중채널 신호의 분산곡선을 역산하여 S파 속도구조를 구하고 감쇠지수(attenuation coefficient)를 구하였다. 다중채널 신호 중 음원에서 가장 가까운 신호를 기준 신호로 정하고 10 Hz에서 45 Hz 사이의 주파수에 대하여 거리에 따라 기준 신호에 대한 진폭의 비가 감소하는 정도를 나타내는 기울기를 구하여 감쇠지수를 결정하였다. 이 감쇠지수를 역산하여 지반 최상부 8 m 층의 S파 속도와 함께 Q$s^{-1}$를 구하였다. 이 지역의 시추조사에 의하면 이 지역의 지층은 크게 상부 4 m 실트질 모래층과 하부 4 m 실트질 점토층으로 나누어진다. 표면파 역산에 의해 구해진 S파 속도와Q$s^{-1}$를 시추조사 결과와 비교해보면, 상부 실트질 모래층에서 S파 속도의 공간적 해상도는 약 80m/sec로 하부 실트질 점토층의 속도 40m/sec보다 상대적으로 높은 값을 보인다. 각 층에서 S파 속도의 공간적 해상도는 뚜렷하다. Q$s^{-1}$의 공간구조는 상부 실트질 모래층에서 약 0.02를 보이고 하부 실트질 점토층에서 0.03으로 증가하는 양상을 보인다. Q$s^{-1}$의 공간적 해상도는 상부 약 5 m 구간에서는 양호하나 그 보다 깊은 곳에서는 공간적 해상도가 아주 낮아지는 것을 볼 수 있다. 이 조사지역에서는 실트질 모래층에서 실트질 점토층보다 높은 S파 속도가 나타나고 낮은 Q$s^{-1}$ 값을 보인다. 그러나, 지반의 S파 속도와 Q$s^{-1}$를 결정하는 다른 많은 요인들이 있으므로 이를 일반화하기 위해서는 연약지반의 S파 속도와Q$s^{-1}$에 관한 자료와 연구가 집적되어야 할 것이다.

Prediction of Electromagnetic Wave Propagation in Space Environments Based on Geometrical Optics

  • Kim, Changseong;Park, Yong Bae
    • Journal of electromagnetic engineering and science
    • /
    • 제17권3호
    • /
    • pp.165-167
    • /
    • 2017
  • We predict the electromagnetic wave propagation in space environments using geometrical optics. The effective indices of the troposphere, stratosphere, and ionosphere are computed, and the reflection, refraction, and attenuation of electromagnetic waves in space environments are calculated based on the ray tracing technique and geometrical optics. The influence of the refractive index and loss of atmosphere and the incident angle of the antenna on electromagnetic wave propagation is discussed.