• 전기학회논문지
• /
• 제61권12호
• /
• pp.1892-1897
• /
• 2012

Modern electronic circuits are of importance for the function of communication, traffic systems and security systems. An intentional threat to these systems could be of big casualties and economic disasters. This study has examined susceptibility of electronic circuits inside the cavity by HPEM(High Power Electromagnetics). The UWB measurements were done at an anechoic chamber using a RADAN voltage source, which can generate a transient impulse of about 200 kV. The HPEM wave penetrated inside the metal case appeared to the long damped ringwave of pulse length compared with the incident wave. In addition, the resonant frequency generated inside the metal case occurred primarily in the range of 1~3 GHz. The frequency band of 1~3 GHz was influenced on the electronic circuit, which was confirmed by an external antenna and an internal absorber. The electronic circuit was influenced by HPEM infiltrated into the cavity at the 86 kV/m out of the metal cases. Also in case of an absorber the susceptibility of an electronic circuit was smallest among other cases(aperture, antenna). It is considered that absorber has a function absorbing electromagnetic wave infiltrated into the cavity and simultaneously limiting resonance by varying a boundary condition inside the cavity. Based on the results, electronic equipment systems could be applied to protection that has suited system requirements.

• 한국인터넷방송통신학회논문지
• /
• 제23권2호
• /
• pp.87-94
• /
• 2023

최신의 무기체계 및 전자장비들은 아군의 생존성 향상을 위해 스텔스 기술에 대한 요구가 증가하고 있기 때문에, 레이다 반사 면적을 줄이는 저피탐 기술 구현이 필요하다. 이러한 스텔스 기술을 위해 형상 설계나 전파 흡수체를 적용한 저피탐 특성 구현 방법이 널리 사용되는데, 능동위상배열 안테나는 형상 설계에 구조적인 한계가 있고 전파 흡수체 적용 시 안테나의 전기적 성능이 저하되는 단점이 있다. 따라서 본 논문에서는 X-대역에서 동작하는 능동위상배열 안테나의 저피탐 특성 구현을 위해 전파 흡수체를 적용하기에 적합한 개별 복사소자를 선정하고, 13x13 배열 안테나를 설계 및 제작하였다. 다음으로 제작된 안테나의 흡수체 유무 및 종류에 따른 상대 RCS와 전기적 성능 측정 결과 비교를 통해 저피탐 특성은 확보하면서 전기적 성능은 동등 이상의 수준으로 유지됨을 보임으로써, 본 논문에서 제안한 저피탐 특성 구현 방법이 유효함을 보이고 전파 흡수체 적용 시 안테나 성능이 저하되는 한계를 극복할 수 있음을 확인하였다.

• 한국재료학회지
• /
• 제29권9호
• /
• pp.532-541
• /
• 2019

Information and communication technologies are developing rapidly as IC chip size becomes smaller and information processing becomes faster. With this development, digital circuit technology is being widely applied to mobile phones, wireless LANs, mobile terminals, and digital communications, in which high frequency range of GHz is used. In high-density electronic circuits, issues of noise and EMC(Electro-Magnetic Compatibility) arising from cross talk between interconnects or devices should be solved. In this study, sheet-type electromagnetic wave absorbers that cause electromagnetic wave attenuation are fabricated using composites based on soft magnetic metal powder and silicon rubber to solve the problem of electromagnetic waves generated in wireless communication products operating at the frequency range of 2.4 GHz. Sendust(Fe-Si-Al) and carbonyl iron(Fe-C) were used as soft magnetic metals, and their concentrations and sheet thicknesses were varied. Using soft magnetic metal powder, a sheet is fabricated to exhibit maximum electromagnetic attenuation in the target frequency band, and a value of 34.2dB(99.9 % absorption) is achieved at the target frequency.

• Journal of the Optical Society of Korea
• /
• 제17권2호
• /
• pp.117-129
• /
• 2013

We briefly review the recent progress in passively mode-locked fiber lasers (PMLFLs) based on semiconductor saturable absorber mirrors (SESAMs) and discuss the detailed characterization of a SESAM-based, passively mode-locked erbium-doped fiber (EDF) laser operating in the 1.5-${\mu}m$ spectral range for various configurations. A simple and compact design of the laser cavity enables the PMLFL to generate either femtosecond or wavelength-tunable picosecond pulses with high stability as the intra-cavity filtering method is altered. All the cavities investigated in our experiments present self-starting, continuous-wave mode-locking with no Q-switching instabilities. The excellent stability of the source eventually enables the wavelength-tunable PMLFL to be used as a master oscillator for a power-amplifier source based on a large-core EDF, generating picosecond pulses of >10-kW peak power and >100-nJ pulse energy.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.263-267
• /
• 2004

This paper presents a comparative study on numerical and wave-maker generated waves. The wave-makers employed to carry out the experiments have mathematical forms. The linear and quadratic models were tested. When it comes numerical analysis, the authors used the FLUENT which is widely used commercial code. Only two dimensional cases were considered. The experiments were done in a small wave flume. The waves were generated for various frequencies to examine the characteristics of the water waves. The comparison of the numerical and wave-maker generated waves were made.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2005년도 전기학술대회논문집
• /
• pp.429-434
• /
• 2005

In this paper, we investigated EM wave absorption property of EM wave absorbers prepared with sendust. The EM wave absorbers have good EM wave absorption properties in 1 GHz ${\sim}$ 3 GHz. On the other hand, the absorption band of the EM wave absorber coated with $Al(OH)_3$ larger than non-coated one. Pulverization effect of sendust on EM wave absorption properties was also investigated.

• 한국해양환경ㆍ에너지학회지
• /
• 제18권4호
• /
• pp.254-262
• /
• 2015

가동 물체형 점흡수식 반구형 파력발전장치의 수면하 형상에 대한 매개변수 연구를 수행하였다. 매개변수로는 반구의 반지름과 흘수를 사용하였고, 각 조건에 따른 반구의 상하운동응답을 분석하여 최적의 반지름과 흘수사이의 관계를 추정하였다. 또한 최대 파력 에너지를 추출하기 위해 PTO 시스템으로 인한 추가 감쇠 계수를 부유체의 방사 감쇠 계수와 동일하게 지정하였다. 부유체의 운동응답 스펙트럼과 추출 파워 스펙트럼을 입사파 스펙트럼 첨두 주파수의 변화에 따라 구하였다. 이를 통해, 가용 파 에너지 추출량의 첨두 주파수가 입사파 스펙트럼의 첨두 주파수보다 약 20% 클 때, 최대 파워 실효치를 갖는 것을 알 수 있었다.

• 한국해양공학회지
• /
• 제27권4호
• /
• pp.68-75
• /
• 2013

This paper investigates the characteristics of waves generated by a flap-type wave maker in a two-dimensional wave channel. Measurements are carried out for various water depths, wave heights, periods, and lengths capacitance-type wave height gages. The experimental results are shown to satisfy the dispersion relation of the linear wave theory. For waves with a small height and long period, the wave profiles agree well with those of the linear wave theory. However, as the wave height and period become higher and shorter, respectively, it is shown that the wave profiles measured in the present experiments are different from the linear wave profiles, and the measured wave heights are smaller than the target wave heights, which may be due to the non-linearity of the waves. As the wave progresses toward the channel end, the wave height gradually decreases. This reduction in the wave height along the wave channel is explained by the wave energy dissipation due to the friction of the side walls of the channel. The performance of the wave absorber in the channel is found to be acceptable from the results of the wave reflection tests.

• 한국전자파학회논문지
• /
• 제25권3호
• /
• pp.339-347
• /
• 2014

본 논문에서는 유연성 기판을 이용한 새로운 광대역 메타물질 구조의 흡수체를 제안하였다. 제안된 메타 물질 구조의 단위 셀은 유연성 있는 폴리이미드 기판 위의 동일 평면상에 놓여진 ELC 공진기와 cut-wire 구조로 이루어졌으며, 설계 주파수 대역 밖에서 레이더 단면적(RCS) 값을 감소시키기 위하여 제안된 구조의 금속 패턴 층은 입사 전자파의 진행 방향과 평행하게 놓았다. 총 $33{\times}45$개의 단위 셀들의 배열로 이루어진 흡수체 시작품을 제작하고, 측정한 결과, 주파수 9.06 및 15.0 GHz에서 각각 92 % 및 93 % 이상의 최대 흡수율과 75 %의 full-width at half-maximum 대역폭을 나타내었다. 제안된 금속 접지 판이 없는 메타물질 구조는 마이크로파 주파수대 광대역 흡수체로 곡면 구조에도 응용이 가능하다.

• 한국군사과학기술학회지
• /
• 제27권3호
• /
• pp.311-318
• /
• 2024

In this paper, a design for a radio frequency(RF) and infrared(IR) absorber with metasurfaces is discussed in microwave frequency bands. The RF absorber includes double layers of metasurfaces to operate in S- and X-bands. Effects of sheet resistance of the metasurfaces and thicknesses of dielectric supporting layers on reflection responses are investigated. An IR stealth layer incorporates an array of conductive grids with slits to reflect IR signals but to transmit RF signals and visible rays. Periodicity of the grids and slits is studied for transmission responses in the X-band and a surface area ratio. Reflection responses of the RF/IR multispectral absorber are found to be lower than -10 dB and -16 dB in the S- and X-bands, respectively, from full-wave simulation. Finally, the RF/IR multispectral absorber is fabricated and its reflection responses are measured to verify designed performance.