• 한국안전학회지
• /
• 제34권5호
• /
• pp.111-118
• /
• 2019

Recently, a variety of special concrete structures have been designed in domestic and overseas construction markets and more advanced construction technology is required. Therefore, it is necessary to secure quantitative construction technology. For this purpose, it is essential to develop a standard reference material having a constant flow performance and quality to evaluate quantitative performance. On the other hand, the flowability of the concrete is greatly influenced by the flowability of the cement paste. Also, in consideration of design strength and workability, mix design is carried out at various mixing ratios according to the purpose of the site. Therefore, in this study, based on the derived components of standard reference materials for cement paste, we suggested mixing ratio of standard reference materials that can uniformly simulate the flow characteristics of cement paste according to W/C. As a result, it was found that the yield stress was determined by the ratio of water and glycerol but plastic viscosity was controled by limestone content. Finally, the ratio of standard reference materials to simulate the rheological range of cement paste by W/C was suggested.

• Computers and Concrete
• /
• 제5권5호
• /
• pp.475-490
• /
• 2008

The paper explores the potential of applicability of Genetic programming approach (GP), adopted in this investigation, to model the combined effects of five independent variables to predict the mini-slump, the plate cohesion meter, the induced bleeding test, the J-fiber penetration value, and the compressive strength at 7 and 28 days of self-compacting slurry infiltrated fiber concrete (SIFCON). The variables investigated were the proportions of limestone powder (LSP) and sand, the dosage rates of superplasticiser (SP) and viscosity modifying agent (VMA), and water-to-binder ratio (W/B). Twenty eight mixtures were made with 10-50% LSP as replacement of cement, 0.02-0.06% VMA by mass of cement, 0.6-1.2% SP and 50-150% sand (% mass of binder) and 0.42-0.48 W/B. The proposed genetic models of the self-compacting SIFCON offer useful modelling approach regarding the mix optimisation in predicting the fluidity, the cohesion, the bleeding, the penetration, and the compressive strength.

• Advances in concrete construction
• /
• 제7권2호
• /
• pp.107-115
• /
• 2019

The possibility of using a combination of mineral admixtures as a replacement for cement may reduce the $CO_2$ emission which causes global warming and climatic changes on the environment. By using the combination of different byproducts from various industries, for replacing cement in concrete leads to saving in energy and natural resources. In this article, an attempt has been made to study the mechanical and water absorption properties of concrete incorporated with combination of Fly ash (FA), Alccofine (ALC) and Collodial Nano Silica (CNS) at 7, 28 and 56 days curing period. Cement has been partially replaced by combination of FA at 25%, ALC at 10% and CNS at 0.5%, 1%, 2% and 3% with water cement ratio of 0.43. The result indicates that the incorporation of combination of FA, ALC and CNS can be very effective in improvement of mechanical and water absorption properties of concrete. The Mix with a combination of 25% FA, 10% ALC and 1% CNS is most effective in improvement of mechanical and water absorption properties as compared with all other mixes.

• Computers and Concrete
• /
• 제17권5호
• /
• pp.629-638
• /
• 2016

Optimization of the concrete mixture design is a process of search for a mixture for which the sum of the cost of the ingredients is the lowest, yet satisfying the required performance of concrete. In this study, a statistical model was carried out to model a cost effective optimal mix proportioning of high strength self-compacting concrete (HSSCC) using the Response Surface Methodology (RSM). The effect of five key mixture parameters such as water-binder ratio, cement content, fine aggregate percentage, fly ash content and superplasticizer content on the properties and performance of HSSCC like compressive strength, passing ability, segregation resistance and manufacturing cost were investigated. To demonstrate the responses of model in quadratic manner Central Composite Design (CCD) was chosen. The statistical model showed the adjusted correlation coefficient R2adj values were 92.55%, 93.49%, 92.33%, and 100% for each performance which establish the adequacy of the model. The optimum combination was determined to be $439.4kg/m^3$ cement content, 35.5% W/B ratio, 50.0% fine aggregate, $49.85kg/m^3$ fly ash, and $7.76kg/m^3$ superplasticizer within the interest region using desirability function. Finally, it is concluded that multiobjective optimization method based on desirability function of the proposed response model offers an efficient approach regarding the HSSCC mixture optimization.

• 농업과학연구
• /
• 제15권1호
• /
• pp.82-94
• /
• 1988

이 논문(論文)은 기포(起泡)모르터의 제특성(諸特性)에 관(關)한 기초자료(基礎資料)를 제공(提供)하고져 수행(遂行)되었는 바, 이 연구(硏究)를 통(通)하여 얻어진 결과(結果)를 요약(要約)하면 다음과 같다. 1. 각(各) 기포(氣泡)모르터에서 물-시멘트비는 당배합비(富配合比)일수록, 기포제(起泡劑) 및 기포(氣泡)의 첨가량(添加量)이 증가(增加)할수록 감소(減少)하였으며, 보통(普通)시멘트 모르터에 비(比)하여 혼합기포주입형(混合氣泡注入型)은 1.6~53.1%, 사전기포주입형(事前氣泡注入型)은 4.4~24.1%의 물-시멘트비(比)가 감소(減少)되었다. 2. 각(各) 기포(氣泡)모르터의 밀도(密度)는 빈배합(貧配合)일수록, 기포제(起泡劑) 및 기포(氣泡)의 첨가량(添加量)이 증가(增加)할수록 작게 나타났으며, 밀도(密度)의 감소율(減少率)은 당배합(富配合)일수록, 기포제(起泡劑) 및 기포(氣泡)의 첨가량(添加量)이 증가(增加)할수록 크게 나타났다. 3. 기포(起泡)모르터는 보통(普通)시멘트 모르터에 비(比)하여 혼합기포주입형(混合氣泡注入型)은 38.8~55.9%, 사전기포주입형(事前氣泡注入型)은 9.7~23.6%의 자중감소(自重減少)를 보였다. 4. 각(各) 기포(起泡)모르터의 급수율(吸水率)은 빈배합(貧配合)일수록, 기포제(起泡劑) 및 기포(氣泡)의 첨가량(添加量)이 증가(增加)할수록 높게 나타났으며, 흡수율(吸水率)의 증가율(增加率)은 당배합(富配合)일수록, 기포제(起泡劑) 및 기포(氣泡)의 첨가량(添加量)이 증가(增加)할수록 크게 나타났다. 5. 72시간(時間) 수침(水浸)에서 각(各) 기포(氣泡)모르터의 흡수율(吸水率)은 보통(普遇)시멘트 모르터에 비(比)하여 혼합기포주입형(混合氣泡注入型)은 3.41~5.85배(倍)로 나타났으며, 사전기포주입형(事前氣泡注入型)은 1.05~1.55배(倍)로 나타났으며, 흡수율(吸水率)의 변화율(變化率)은 모두 수침초기(水浸初期)에 높게 나타나는 경향(傾向)을 보였다. 6. 각(各) 기포(氣泡)모르터의 각(各) 강도(强度)는 빈배합(貧配合)일수록, 기포제(起泡劑) 및 기포(氣泡)의 첨가량(添加量)이 증가(增加)할수록 작게 나타났으며, 각(各) 강도(强度)의 감소율(減少率)은 빈배합(貧配合)일수록, 기포제(起泡劑)나 기포(氣泡)의 첨가량(添加量)이 증가(增加)할수록 크게 나타났다. 7. 기포(氣泡)모르터는 보통(普通)시멘트 모르터에 비(比)하여 재령(材齡) 28일(日)에서 혼합기포주입형(混合氣泡注入型)은 77.0~92.8%, 사전기포주입형(事前氣泡注入型)은 36.7~74.4%의 강도감소(强度減少)를 보였고, 각(各) 기포(氣泡)모르터의 각(各) 강도간(强度間)의 상관관계(相關關係)는 직선형(直線形)으로 나타났으며 고도(高度)의 유의성(有意性)이 인정(認定)되었다. 8. 각(各) 기포(氣泡)모르터의 공기량(空氣量)은 빈배합(貧配合)일수록, 기포제(起泡劑)나 기포(氣泡)의 첨가량(添加量)이 증가(增加)할수록 크게 나타났으며, 공기량(空氣量)이 증가율(增加率)은 당배합(富配合)일수록, 기포제(起泡劑)나 기포(氣泡)의 첨가량(添加量)이 증가(增加)할수록 높게 나타났다. 9. 기포(氣泡)모르터의 공기량(空氣量)은 보통(普通)시멘트 모르터에 비(比)하여 혼합기포주입형(混合氣泡注入型)은 26.0~63.8배(倍), 사전기포주입형(事前氣泡注入型)은 5.8~17.7배(倍)를 보였다. 10. 각(各) 기포(氣泡)모르터에서 밀도(密度)와 흡수율(吸水率), 압축강도(壓縮强度) 및 공기량(空氣量)과의 상관관계(相關關係)는 매우 높은 유의성(有意性)을 보였고, 배합비(配合比)와 기포제(起泡劑) 및 기포(氣泡)의 첨가량(添加量)에 따라 밀도(密度), 흡수율(吸水率), 제강도(諸强度) 및 공기량(空氣量)을 추정(推定)할 수 있는 다중회귀방정식(多重回歸方程式)을 유도(誘導)하였으며 각(各) 방정식(方程式)은 고도(高度)의 유의성(有意性)이 인정(認定)되었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.641-646
• /
• 2001

Generally, when Fly-Ash was used as replacement material of cement in concrete, it might occur retardation of setting and hardening. So, it is unable to use a large amount of Fly-Ash as replacement for cement. However, if it is used as replacement material of fine aggregate in concrete, we can use a large amount of Fly-Ash and settle a problem of natural-aggregate exhaustion. Furthermore, engineering properties of High Volume Fly-Ash Concrete Is better than that of plain concrete But, the larger Fly-Ash is replaced, the more fluidity of High Volume Fly-Ash Concrete decrease, because porous organization of Fly-Ash adsorb water and Superplasticizer. In this study, after appending additional water to High Volume Fly-Ash Concrete in proportion to weight of Fly-Ash, we intend to find proper ratio which doesn't affect strength and satisfy fluidity As a result of this study, it was found that fluidity of mortar with 25~28 percentage of additional water was satisfied with fluidity of plain mortar, and compressive strength of that was similar to plain mortar's

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 추계 학술논문 발표대회
• /
• pp.215-216
• /
• 2012

The purpose of this study is to analyze the situation and feature of construction technology by analysis properties and the mixture proportion of a reinforced concrete building from the modern domestic and to leave technological records for the optimal maintenance of the cultural heritage. The study says, the case of the 1:3:6 mix concrete has been standard regardless of the kind of structures after the concrete has being used in earnest, However, The strength range is big from Water-Cement ratio difference according to the concrete casting site.

• 콘크리트학회지
• /
• 제4권4호
• /
• pp.149-160
• /
• 1992

콘크리트 압축강도가 설계의 규준이 될 경우 배합비를 결정하는 방법은 여러 가지가 있으나, 파괴에너지 및 탄성계수와 같은 규준이 주어질 경우 배합비 결정에 적용하는 방법은 거의 없다. 이를 위하여 본 연구는 콘크리트 재료성질의 관계에 관한 배합설계도(Mix design diagram)를 제안하였다. 이 방법은 시멘트량, 물-시멘트 비가 콘크리트의 압축강도, 탄성계수, 할렬인장강도, 파괴에너지 그리고 콘크리트 특성길이(Characteristic length)에 주는 영향을 실험에 의하여 규명하였다. 시편제작을 위하여 각기 다른 물-시멘트비와 워커빌리티를 갖는 6종류의 무근콘크리트 배합이 사용되었다.

• 콘크리트학회지
• /
• 제6권6호
• /
• pp.151-158
• /
• 1994

본 연구에서는 수경성 시멘트 경화체의 구조적 결함인 휨강도를 향상시키시 위해 보통 포틀랜드 시멘트비를 0.1로 하여 혼합수량을 줄이고 수용성 고분자 물질인 Hydroxy Propy Methyl Cellulose(HPMC)를 첨가하여 시멘트입자의 윤활작용에 따른 균일한 분산효과와 결합효과를 얻도록 하였으며, twin roll mill로 혼련 성형하여 치밀하고 균일한 경화제 시편을 제조하였다. 이러한 고강도 시멘트 경화체의 휨강도는 약 96MPa, 탄성계수는 60GPa로 우수한 특성을 나타내었다. 고강도 시멘트의 고강도화 기구는 100${\mu}m$ 이상의 큰 기공제거 및 균열성장경로인 모세관 기공의 감소, 미수화 시멘트의 증가로 인한 탄성계수의 증가와 crack toughening(입자 가교, 고분자 섬유 가교, frictional interlocking)에 의한 파괴 인성의 향상 때문인 것으로 판단된다.

• 한국농공학회지
• /
• 제38권4호
• /
• pp.147-154
• /
• 1996

This study wag performed to evaluate the engineering properties of permeable polymer concrete with stone dust and fly ash and unsaturated polyester resin. The following conclusions were drawn. 1. The highest strength was achieved by stone dust filled permeable polymer concrete, it was increased 17% by compressive strength, 188% by bending strength than that of the normal cement concrete, respectively. 2. The water permeability was in the range of 3.O76~4.152${\ell}/ cm{^2}/h$, and it was largely dependent upon the mix design. These concrete can be used to the structures which need water permeability. 3. The static modulus of elasticity was in the range of $1.15{\times} 10^5kg/cm^2$, which was approximately 53 56% of that of the normal cement concrete. 4. The poisson's number of permeable polymer concrete was in the range of 5.106~5.833, which was less than that of the normal cement concrete. 5. The dynamic modulus of elasticity was in the range of $1.29{\times} 10^5~1.5{\times} 10^5 kg/cm^2$, which was approximately less compared to that of the normal cement concrete. Stone dust filled permeable polymer concrete was showed higher dynamic modulus. The dynamic modulus of elasticity were increased approximately 7~13% than that of the static modulus. 6. The compressive strength, bending strength, elastic modulus, poisson's ratio, longitudinal strain and horizontal strain were decreased with the increase of poisson's number and water permeability at those concrete.