• 제목/요약/키워드: water-based paint

검색결과 42건 처리시간 0.026초

폐수처리를 위한 제올라이트 막의 최근 연구에 대한 총설 (Recent Progress in Zeolite Membrane for Wastewater Treatment: A Review)

  • 이주엽;라즈쿠마 파텔
    • 멤브레인
    • /
    • 제32권4호
    • /
    • pp.227-234
    • /
    • 2022
  • 폐수는 석유 정제 산업에서만 방출되는 것이 아니고 아니라 가죽, 섬유, 페인트, 목재, 염료 가공 산업에서 또한 방출된다. 이런 산업 폐수는 중금속과 질소화합물 등 수질오염물질을 포함하고 있으며 화학적 산소요구량(COD)이 높다. 안전한 처리를 위해 폐수에서 각종 오염물질을 걸러내는 방식이 있지만 막 기반 기술은 고효율, 저비용으로 가장 효율적인 방법 중 하나이다. 다양한 막 중에서, 제올라이트 막은 가성비로 주목을 받고 있으며 많은 연구를 거쳤다. 본 리뷰논문은 i) 폐수처리, ii) 미세여과막, iii) 중공사막, iv) 초여과막의 순서로 폐수처리를 위한 제올라이트 막의 최근 진척을 중점으로 다루고 있다.

Preparation of chitosan, sunflower and nano-iron based core shell and its use in dye removal

  • Turgut, Esra;Alayli, Azize;Nadaroglu, Hayrunnisa
    • Advances in environmental research
    • /
    • 제9권2호
    • /
    • pp.135-150
    • /
    • 2020
  • Many industries, such as textiles, chemical refineries, leather, plastics and paper, use different dyes in various process steps. At the same time, these industrial sectors are responsible for discharging contaminants that are harmful and toxic to humans and microorganisms by introducing synthetic dyes into wastewater. Of these dyes, methylene blue dye, which is classified as basic dyes, is accepted as a model dye. For this reason, methylene blue dye was selected in the study and its removal from the water was studied. In this study, two efficient biosorbents were developed from chitosan and sunflower waste, an agro-industrial waste and modified using iron nanoparticles. The biosorption efficiency was evaluated for methylene blue (MB) dye removal from aqueous solution under various parameters such as treating agent, solution pH, biosorbent dosage, contact time, initial dye concentration and temperature. We investigated the kinetic properties of dye removal from water for Chitosan-Sunflower (CS), Chitosan-Sunflower-Nanoiron (CSN). When the wavelength of MB dye was spectrophotometrically scanned, the maximum absorbance was determined as 660 nm. For the core shell biosorbents we obtained, we found that the optimum time for removal of MB from wastewater was 60 min. The pH of the best pH was determined as 5 in the studied pH. The most suitable temperature for the experiment was determined as 30℃. SEM-EDAX, TEM, XRD, and FTIR techniques were used to characterize biosorbents produced and modified in the experimental stage and to monitor the change of biosorbent after dye removal. The interactions of the paint with the surface used for removal were explained by these techniques. It was calculated that 80% of CS and 88% of CSN removed MB in optimum conditions. Also, the absorption of MB dye onto the surface was investigated by Langmiur and Frendlinch isotherms and it was determined from the results that the removal was more compatible with Langmiur isotherm.

모로코인(人)의 장신구(裝身具)와 화장(化粧)에 관(關)한 연구(硏究) (A Study of the Personal Ornaments and Make-up of Maroccan)

  • 이순홍
    • 패션비즈니스
    • /
    • 제5권2호
    • /
    • pp.15-34
    • /
    • 2001
  • Ornaments are accessories for the decoration of the body or dress. They aren't unavoidably required one, but serve to make one's dress perfect as decorative industrial art objects. In Morocco, ornaments were initially used as a sign of social position or the class or an incantatory symbol. In effect, they were originally employed to adjust one's dress, not just for decoration, and they were of use for household economy. Gold, silver and handcraft available for exchange were a means of increasing one's property and an indication of social standing and wealth. In particular, the dress and jewelry of a bride was a measure of her family's wealth, regarded as a symbol of her chastity and value. The ornaments symbolically back up people's faith in supernatural power, and their real value is based on implicit form or way of decoration, not the external shape. Specifically, there is a tendency to use the form of animal as a protector, not one to frighten people. In the artistic tradition of Morocco, fish pattern stands for water and rain, and eagle and bird are considered to be related to fate. Scorpion and lizard are depicted as an inquirer of sun, and snake is a symbol of abundance and sexual instinct, being viewed to have an ability to cure disease. Turtle pattern is a symbol of saint because it protects one from the evil. The ornaments are made of gold, silver, amber, clam, garnet, glass, nielle, enamel, glaze, coral or tree, and symbolic patterns are used, including hand(a symbol of five numerals), turtle, lizard, scorpion, eye, triangle, bird and eggs. They are very big and diverse, being categorized into ornaments for the head or the chest, neckless, fibula, earring, bracelet and ring. For Moroccans, make-up is a sort of instinctive behavior to meet aesthetic and sexual desire. They also wear make-up for practical purpose of protection, intentionally inflict a wound on the skin for ceremonial or religious purpose, paint the skin with pigment, or have the part of the body tattooed for incantatory purpose. All this actions are regarded as make-up. The raw material of cosmetics is aker, a vegetable dye. They get the lips or cheeks turn red and paint eyebrows with yellow saffran powder to have a bad devil lose its strength. Tattooing is mainly done by women and viewed as a sign of their value or social organization they belong to. Sometimes that is used to represent a woman's being old enough to marry or getting married already or the frequency of marriage. Besides, tattoo is believed to prevent or remedy loose bowels or cough, depending on its location or pattern, and they often change tattoo according to the change of beauty art.

  • PDF

자동차용 에폭시계 양이온형 전착도료의 내식성에 대한 연구 (Corrosion Behavior of Cathodic Electrodeposited Epoxy Based Coating for Automotive Primer)

  • 이승엽;이종무;곽삼탁;문명준;서차수
    • 공업화학
    • /
    • 제16권2호
    • /
    • pp.250-256
    • /
    • 2005
  • 자동차 산업에서의 도장 외관은 아주 중요하다. 이러한 도장외관의 향상을 위해서 기본적으로 도막의 내식성과 밀착성이 해결되어야 한다. 도막의 물성의 향상을 위해서 금속의 화성피막은 매우 중요한 요소가 되고 있다. 전착도장 중 음극에서의 pH는 12 정도까지 증가하고, 이 같은 강알카리 조건에서 금속과 화성피막의 용해가 일어난다. 이 같은 현상의 화성피막과 소재사이의 결합력을 감소시키게 된다. 일반적으로 인산염 피막구조는 hopeite 및 phosphphylife 구조를 갖지만 hopeite 피막 구조보다는 phosphophyllite 피막구조가 내식성이 보다 우수하고, 양이온 전착도료에 의한 전착도장에서 강알카리화된 계면에서 피막의 알카리 용해성이 적어 내수밀착성의 향상을 보인다. Ni, Mn 등의 보조금속의 첨가는 P-ratio (phosphophyllite/ hopeite + phosphophyllite)를 증가시키므로 내수 밀착성과 내식성을 향상시키게 됨을 알 수 있었다.

가연성 액체 혼합물의 인화 위험성에 관한 연구 (A Study on Flammability Risk of Flammable Liquid Mixture)

  • 김주석;고재선
    • 한국재난정보학회 논문집
    • /
    • 제16권4호
    • /
    • pp.701-711
    • /
    • 2020
  • 연구목적: 본 연구에서는 두 물질의 혼합물(가연물+가연물)에서의 인화 위험성의 증가 또는 감소를 실험적으로 확인하고, 혼합물의 위험성을 제시하는 목적이 있기에 액체 혼합물의 인화 위험성을 실험적으로 확인하였다. 연구방법:인화점 실험방법 및 결과처리는 원유 및 석유 제품 인화점 시험 방법으로 사용되고 있는 테그밀폐식 시험방법인 KS M 2010-2008을 기준으로 실험하였다. 본 실험에 사용한 장비의 제조사는 일본의 TANAKA사에서 생산한 장비로 KS M 2010의 시험규격을 만족하는 시험장비로 인화점을 측정하였고, 점화원으로는 LP가스를, 냉각수로는 물을 사용하였다. 또한 인화점 측정시 냉각수의 온도는 약 2℃의 냉각수를 사용하여 실험을 진행하였다. 연구결과:실험결과로는 먼저 가연성+가연성 혼합물의 경우 두 물질의 인화점 차이가 크지 않으면 인화점의 변화가 거의 없었고, 두 물질의 인화점 차이가 낮으면 인화점이 높은 물질의 증가에 따라 인화점이 증가하는 경향을 보였으나, 톨루엔과 메탄올의 경우, 혼합물에서 인화점이 낮은 물질보다 더 낮은 인화점을 보였다. 또한 도료용 희석제의 경우, 혼합물로 이루어져서 그 물질의 인화점을 예상하기가 쉽지 않았지만 실험적으로 측정해 본 결과 -24℃~7℃사이로 측정되었다. 결론: 본 연구에서의 결과는 기존의 위험물안전관리법에서의 위험물 판정 기준에 대한 세부 내용의 실효성 확보 및 위험물 판정의 신뢰성 및 재현성 확보를 목적으로 인화성 혼합물에 대한 실험적 연구를 통해서 혼합물에 대한 위험성 판단 기준을 제시하였고, 향후 소방현장에서 단속되는 인화성 액체 대한 실험적 판정 기준에 대한 참고적인 자료를 제공할 수 있을 것이다. 또한 본 연구로 시험방법별 차이 실험에 대한 노하우를 축적한다면 위험물의 위험성 평가 연구에 있어 기초 자료이자 위험물 판정 관한 연구의 기반으로 활용될 수 있기를 기대한다.

Computational Investigation of Turbulent Swirling Flows in Gas Turbine Combustors

  • Benim, A.C.;Escudier, M.P.;Stopford, P.J.;Buchanan, E.;Syed, K.J.
    • International Journal of Fluid Machinery and Systems
    • /
    • 제1권1호
    • /
    • pp.1-9
    • /
    • 2008
  • In the first part of the paper, Computational Fluid Dynamics analysis of the combusting flow within a high-swirl lean premixed gas turbine combustor and over the $1^{st}$ row nozzle guide vanes is presented. In this analysis, the focus of the investigation is the fluid dynamics at the combustor/turbine interface and its impact on the turbine. The predictions show the existence of a highly-rotating vortex core in the combustor, which is in strong interaction with the turbine nozzle guide vanes. This has been observed to be in agreement with the temperature indicated by thermal paint observations. The results suggest that swirling flow vortex core transition phenomena play a very important role in gas turbine combustors with modern lean-premixed dry low emissions technology. As the predictability of vortex core transition phenomena has not yet been investigated sufficiently, a fundamental validation study has been initiated, with the aim of validating the predictive capability of currently-available modelling procedures for turbulent swirling flows near the sub/supercritical vortex core transition. In the second part of the paper, results are presented which analyse such transitional turbulent swirling flows in two different laboratory water test rigs. It has been observed that turbulent swirling flows of interest are dominated by low-frequency transient motion of coherent structures, which cannot be adequately simulated within the framework of steady-state RANS turbulence modelling approaches. It has been found that useful results can be obtained only by modelling strategies which resolve the three-dimensional, transient motion of coherent structures, and do not assume a scalar turbulent viscosity at all scales. These models include RSM based URANS procedures as well as LES and DES approaches.

초경석고와 메타카올린 혼합재료의 물성실험 및 적용 (Physical Properties Testing and Practical Applications of Restoration Materials Made with Extra Hard Stone and Metakaolin)

  • 김현숙;이해순
    • 박물관보존과학
    • /
    • 제17권
    • /
    • pp.101-116
    • /
    • 2016
  • 기존의 석고복원재로 복원한 문화재는 대기 중의 수분을 반복하여 흡·방출하면서 물성이 약화되어 형태가 변형되고 채색층 박락이 진행된다. 본 논문에서는 이러한 단점을 보완하기 위해 일반석고보다 더 강한 초경석고를 실험대상으로 두었으며 메타카올린(Metakaolin)을 혼합하여 도자기 복원재료로 적합하도록 물성을 개선하였다. 초경석고와 메타카올린 혼합재료의 압축강도(119MPa)는 일반석고(26MPa)보다 월등히 높았으며, 마모율(0.88%)은 일반석고의 마모율 2.53% 보다 낮게, 흡수율(2.9%)은 일반석고(17.2%) 보다 약 5배 낮게 측정되었다. 특히, 주사전자현미경 관찰결과 혼합재료의 경화치밀도가 단미의 초경석고보다 높았다. 즉, 메타카올린을 첨가함으로써 초경석고의 강도와 수분저항성을 높이고 표면을 치밀하게 하여 도자기 복원재료로서 적합하게 물성을 개선시켰다. 그리고 이 혼합재료를 실재 문화재인 토제수반(신안18892), 분청사기조화문병(접수2034), 분청사기 국문내인화문대접(접수1730)의 결손부 복원에 적용해봄으로써, 혼합재료가 주입 및 적층성형에 유리하고 경화표면이 균질하여 자연스러운 채색이 가능한 재료임을 확인하였다.

납계열 안료의 대기환경에 따른 열화특성 (Degradation of Lead-based Pigments by Atmospheric Environment)

  • 박주현;이선명;김명남
    • 자원환경지질
    • /
    • 제55권3호
    • /
    • pp.281-293
    • /
    • 2022
  • 연백, 연단, 밀타승으로 대표되는 납계열 안료의 대기환경에 따른 열화특성을 규명하였다. 자외선에 노출된 채색시편들은 모두 색차가 4~31로 어두워졌으나 성분에 변화는 없었다. CO2는 시편의 색상 뿐 아니라 성분 변화에 큰 영향을 주지 못하였다. 반면 NO2에 노출된 시편들은 색변화가 크게 나타나고 Lead nitrate(Pb(NO3)2)와 같은 2차 생성물이 확인되었다. 연백과 연단은 NO2에 의한 색차가 각각 2와 10으로 시험 전에 비해 어두워졌으나 밀타승은 색차가 5이고 시험 전에 비해 밝게 변했다. 이를 통해 CO2와 NO2가 동일한 농도일 경우 CO2에 비해 NO2가 안료 보존에 영향력 있는 대기환경 인자임을 확인할 수 있다. 미세먼지에 존재하는 염의 영향을 보기 위해 5% NaCl(in distilled water)를 제조하여 염수 분무 시험을 실시하였다. 그 결과 연백, 연단, 밀타승 모두 시편 색변화와 함께 표면에 2차 생성물이 형성되었다. 이로 인해 아교도막이 박락되거나 hole이 형성되었으며, 생성물을 중심으로 색상이 변하였다. 또한 염수분무 후 XRD 피크 강도와 결정도가 함께 낮아진 것을 볼 수 있다. 염수분무 후 시료의 성분분석 결과 연백의 경우 Litharge가, 밀타승의 경우 Litharge와 Minium이 새로 형성되었다. 이를 통해 채색안료의 보존에 영향력 있는 대기환경 인자는 자외선, NO2, 수용성 염임을 확인하였고 특히 납계열 안료 중 밀타승의 안정성이 다른 안료에 비해 낮은 것을 알 수 있었다.

광주지역 어린이 놀이시설 마감재의 중금속 노출에 의한 인체 위해성평가 (Human Risk Assessment for Exposure to Heavy Metals within Finishing Materials of Playground Facilities for Children in Gwangju)

  • 윤상훈;김소영;조은;남태희;박진환;공화진;이기원;서광엽;박정훈;민경우
    • 한국환경보건학회지
    • /
    • 제50권2호
    • /
    • pp.146-156
    • /
    • 2024
  • Background: Children who use playground facilities are exposed to potential risks due to the high concentration of heavy metals contained in the finishing materials of facilities in children's playgrounds. Objectives: The purpose of this study was to investigate the concentration of heavy metals in the finishing materials of outdoor children's playgrounds where harmful heavy metals exist in Gwangju and to conduct human risk assessment for children and adults by age to find the risks and limitations. Methods: The bottom and top layers of double-painted paint were peeled off and collected together from the finishing materials of children's play facilities such as slides, swings, and seesaws in 147 children's parks in Gwangju. Heavy metals were analyzed using ICP-OES, etc., and human risk assessment was performed using the concentrations of heavy metals. Results: Based on 1.0E-04, which requires legal regulation, CTE was found to pose a carcinogenic risk for preschool children and no carcinogenic risk for the rest of the age groups. However, RME showed that both men and women of all ages had a carcinogenic risk. For reference, when the carcinogenic risk was based on 1.0E-06, CTE was found to pose a carcinogenic risk from infants to elementary school students, and RME was found to have a carcinogenic risk in all age groups. It was judged that there is a non-carcinogenic risk if the non-carcinogenic risk exceeds 1 based on the hazard index (HI) 1. In CTE, there was no non-carcinogenic risk, and RME for preschooler males (1.49E+00) and females (1.56E+00) were found to have non-carcinogenic risk. Conclusions: This study was meaningful in that it examines the differences in the current management of heavy metals concentration standards and potential carcinogenic and non-carcinogenic risks to the human body and discusses the relationship between heavy metals and human health effects.

연안어장 준설퇴적물에 대한 질산염과 인산염의 흡착 (Adsorption of Nitrate and Phosphate onto the Dredged Sediment from a Coastal Fishery)

  • 선영철;김명진;송영채
    • 한국항해항만학회지
    • /
    • 제36권6호
    • /
    • pp.459-463
    • /
    • 2012
  • 본 연구에서는 연안어장 준설퇴적물에 대한 영양염류(인공수 중 질산염과 인산염)의 흡착반응에서 흡착제, pH, 이온강도가 미치는 영향을 살펴보았다. 그리고 준설퇴적물을 이용해서 영양염류를 제거할 수 있는 가능성을 평가하고자했다. ${NO_3}^-$-N($100{\mu}M$, 10mM), ${PO_4}^{3-}$-P($100{\mu}M$, 10mM)에 대한 흡착반응은 10분 이내에 완료되었고, 정상상태에서 $100{\mu}M$ ${NO_3}^-$-N과 $100{\mu}M$ ${PO_4}^{3-}$-P가 각각 61%, 77% 제거 되었다. $900^{\circ}C$에서 준설퇴적물을 열처리했을 때 영양염류 제거율은 증가하지 않았다. CaO와 MgO 같은 첨가제를 사용하면 질산염의 제거율은 0%까지 감소했으나, 인산염 제거율은 98%까지 증가했다. 질산염과 인산염의 등온흡착은 Freundlich 식에 의해 잘 설명되었다($R^2$>0.99). 흡착반응은 pH와 이온강도에 의해 거의 영향을 받지 않았다. 흡착반응시간이 짧고 영양염류 제거율이 상당히 높다는 연구결과는 연안어장 준설퇴적물이 영양염류 제거를 위해 실제로 사용될 수 있는 가능성을 보여준다.