• YAKHAK HOEJI
• /
• v.60 no.2
• /
• pp.73-77
• /
• 2016

Alginic acid and carboxymethyl cellulose sodium are dietary fibers from plants. They have a swelling property and delay the gastric emptying time, thereby resulting in feeling satiated after oral administration, which may eventually contribute to loss of body weight. The goal of this study was to compare swelling property of three commercial matrix tablets based on alginic acid and carboxymethyl cellulose sodium. When the swelling was determined by the Korean Ministry of Food and Drug Safety (MFDS) guideline, the tablet prepared by direct compression method with highly viscous swelling agent showed the highest swelling in acidic conditions. Water uptake of these tablets was rapid and completed within 30 min. Moreover, when the pH was changed from 2.5 to 6.8 buffer, the water uptake was not significantly changed in all tablets.

• Journal of the Microelectronics and Packaging Society
• /
• v.9 no.2
• /
• pp.19-25
• /
• 2002

Glass composed of $Li_2$O.MgO. $MgF_2$.$SiO_2$.$B_2O_3$ for the fabrication of green sheet was prepared by melting process, and glass ceramics was prepared by the process of nucleation and grystal growth for the glass of $Li_2$O.MgO. $MgF_2$.$SiO_2$.$B_2O_3$ system with Lithium fluorhectorite and Lithium boron fluorphlogopite crystal phase. Powderization of the glass ceramics was carried out by water swelling. The average particle size at this point was 2.574 $\mu\textrm{m}$. Slurry was prepared for green sheet using high viscous sol fabricated by water swelling, which shows cleavage phenomenon in prepared glass ceramics. The optimum ratio of powder to water for the tape casting was 18:100, and its viscosity was 11,000~14,000 cps.

• Geomechanics and Engineering
• /
• v.27 no.6
• /
• pp.615-626
• /
• 2021

The main objective of this study is to present a fast and reliable approach to predict the swelling potential of clay-bearing rocks. Investigations showed that there is a good correlation between the swelling potential of a rock and its desire to absorb water due to its clay content which could be measured using the "Contact Angle" test as one of the most common ways to determine the wettability. In this test, the angle between a water drop and the flat rock surface on which it rests is measured. The present method is very fast and returns repeatable results and requires minimal sample preparation. Only having a saw-cut surface of a sample with any shape is all one needs to perform this test. The logic behind this approach is that the swelling potential of a rock is a function of its mineral content and molecular structure, which are not only distributed in the bulk of the sample but also reflected on its surface. Therefore, to evaluate swelling behavior, it is not necessary to wait for a sample to get wet all the way to its "internal structure" (which, due to the low permeability of clay-bearing rocks, is very slow and time-consuming). Instead, one can have a good sense of swelling potential by studying its surface. Parametric studies on the effect of moisture content, porosity, and surface roughness on the contact angle measurements showed that using a saw-cut oven-dried sample is a convenient way to evaluate the swelling potential by this method.

• Analytical Science and Technology
• /
• v.24 no.4
• /
• pp.249-255
• /
• 2011

Swelling of starch granules by water-sorption causes a progressive or sometimes abrupt change in sorption behavior as a result of structural alterations and the possible exposure of new sites with high affinity for water. It is thus of interest to examine the time-dependent change in the size or shape of the starch granules. Gravitational field-flow fractionation (GrFFF) utilizes the earth's gravity as the external field, and is useful for separation of micron-sized particles with larger particles eluting earlier than smaller ones. In this study, GrFFF was used to monitor the swelling of two starch granules, potato starch and sweet potato starch during contact time of 11-12 days at room temperature in water. Results from GrFFF were compared with those obtained from optical microscope (OM). For both starch granules, the mean sizes were increased with time spent in water.

• Journal of the Korean Wood Science and Technology
• /
• v.30 no.3
• /
• pp.48-58
• /
• 2002

This study was carried out through scanning electron microscopy to elucidate the mechanism of thickness swelling in wood particle-polypropylene composite which is a typical way of using wood and plastic materials. For this purpose, control particleboards and nonwoven web composites from wood particle and polypropylene fiber formulations of 100:0, 70:30, 60:40, and 50:50 were manufactured at target density levels of 0.5, 0.6, 0.7, and 0.8 g/cm³. Their water absorption and thickness swelling were tested according to ASTMD 1037-93 (1995). To elucidate thickness swelling mechanism of composite through the observation of morphological change of internal structures, the specimens before and after thickness swelling test by 24-hour immersion in water were used in scanning electron microscopy. From the scanning electron microscopy, thickness swelling of composite was thought to be caused by the complicated factors of degree of built-up internal stresses by mat compression and/or amount of wood particles encapsulated with molten polypropylene fibers during hot pressing. In the composites with wood particle contents of 50 to 60% at target densities of 0.5 to 0.8 g/cm³ and with wood particle content of 70% at target densities of 0.5 to 0.7 g/cm³, thickness swellings seemed to be largely dependent upon the restricted water uptake by encapsulated wood particles with molten polypropylene fibers. Thickness swelling in the composite with wood particle content of 70% at target density of 0.8 g/cm³, however, was thought to be principally dependent upon the increased springback phenomenon by built-up internal stresses of compressed mat.

• Bulletin of the Korean Chemical Society
• /
• v.4 no.4
• /
• pp.162-169
• /
• 1983

The swelling and stress-elongation experiments have been performed for two kinds of gels of tactic poly (2-hydroxyethyl methacrylate) (P-HEMA) with varying crosslinker concentrations. The gels of isotactic and syndiotactic P-HEMA were swollen in aqueous salt solutions upon varying molal concentrations. The solute used were NaCl, $MgCl_2$, $Na_2SO_4$, $MgSO_4$ and urea. The water content at equilibrium swelling and the salt partition coefficient were determined, and stress-elongation curves of the gels were obtained. From these results, the effective number of chain (${\nu}_e$) and the Flory-Huggins interaction parameter (${\chi}_1$) were also obtained. The swelling experiment was also performed under varying solvents, and the degree of swelling was determined. The solubility parameter of P-HEMA was obtained as 13.4 (cal/mole)$^{l/2}$ using the correlation between the degree of swelling and the solubility parameter (${\delta}_1$) of solvents. The mechanical properties of syndiotactic P-HEMA is stronger than that of isotactic P-HEMA, and the water content of both gels become smaller when the crosslinking increases. Isotactic P-HEMA contains more water content than syndiotactic P-HEMA does.

• Journal of the Mineralogical Society of Korea
• /
• v.30 no.2
• /
• pp.71-81
• /
• 2017

Rock properties and the effects of chemicals that were used for conservation were studied for effective conservation treatment of Seated Buddha rock carving, which is composed of grayish white tuff, at Golguram Hermitage, Gyeongju. The rocks contain 3-5% montmorillonite, a swelling mineral and reacting with water, the d spacing of swelling minerals was increased (1.54-2.69%). On the one hand, the physical properties of the rock samples, such as surface hardness, water absorption rate, and porosity improved after the application of ethyl silicate-based stone strengthener. On the other, the interlayer of swelling minerals decreased and greater the of swelling mineral content, the greater is the extent of swelling (4.23-12.12%). When the ethyl silicate-based stone strengthener was applied after pretreatment with a swelling inhibitor, the physical properties were similar to those of the stone strengthener alone. There was no interlayer spacing change of swelling minerals due to swelling inhibition treatment; however, when the stone strengthener was applied after the swelling inhibitor, interlayer changes were similar to those when only the stone strengthener was treated (4.10-11.85%). Though the peak intensity of swelling minerals in X-ray diffraction pattern decreased, the effect of the swelling inhibitor was almost negligible. Therefore, it is not appropriate to use ethyl silicate-based stone strengthener for Golgulam rock containing swelling minerals and supplementing them with a swelling inhibition system is not effective. Because weathering rapidly progresses when swelling minerals contact moisture, for now, measures to prevent water contact, such as expansion of the canopy, are needed in the lower and side parts of the carving.

• Macromolecular Research
• /
• v.13 no.2
• /
• pp.135-140
• /
• 2005

Poly(vinyl alcohol) (PVA) membranes crosslinked with poly(acrylic acid-co-maleic acid) (PAM) were prepared to investigate the effect of aging on their morphology by swelling them for up to 7 days. PAM was used both as a crosslinking agent and as a donor of the hydrophilic-COOH group. A $30 wt\%$ weight loss of the dry membrane was observed in the swelling test after 6 days. The surface of the membrane was dramatically changed after the swelling test. The surface roughness of the PVA/PAM membrane was increased, as determined by atomic force microscopy (AFM). The swelling loosened the polymer structure, due to the release of the unreacted polymer and the decomposition of the ester bond, thereby resulting in an increase in the free volume capable of containing water molecules. The water molecules present in the form of free water were determined by differential scanning calorimetry (DSC). The fraction of free water increased with increasing swelling time. The swelling of the membrane may provide space for the transport of protons and increase the mobility of the protonic charge carriers. The proton conductivity of the membranes measured at T= 30 and $50^{\circ}C$ was in the range of $10^{-3} to 10^{-2} S/cm$, and slightly increased with increasing swelling time and temperature.

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.2 s.130
• /
• pp.17-23
• /
• 2005

Juvenile and transitional-juvenile wood samples from loblolly pine (Pinus taeda) were immersed in water to investigate longitudinal and tangential swelling properties. Increment cores from twenty-six loblolly pine trees were sampled at breast height (1.37 m). Earlywood rings 5 and 9 were separated from the core, extracted, oven-dried and immersed in water at room temperature. The variance in longitudinal swell was significant for ring 5 compared to ring 9 (p = 0.001). It was found that tangential swell might predict longitudinal swelling of juvenile wood at ring 9 but not at ring 5. Poor correlation in ring 5 suggests that swelling response in younger juvenile wood may differ. The swell response at ring 5 did not follow the shrinkage models discussed in the literature while ring 9 adhered to the expected curve.

• Advances in materials Research
• /
• v.1 no.4
• /
• pp.269-284
• /
• 2012

Thermoresponsive hydrogels based on N-Isopropylacrylamide (NIPAM) and 2-Hydroxyethylacrylate (HEA) were prepared by free radical polymerization. The hydrogels were characterized by elemental (CHN) analysis, differential scanning calorimetry (DSC) and thermo gravimetric analysis (TGA). DSC thermogram showed two endothermic transitions which are due to hydration of water present in different environments. One near $0^{\circ}C$ called melting transition of ice and was used to calculate the quantitative determination of the amounts of freezing and non freezing water. The other transition above the ambient temperature was due to the combination of hydrophobic hydration and hydrophilic hydration which changes with the copolymer compositions. Swelling and deswelling studies of the hydrogels were carried out using the aqueous media, salt and urea solutions. The experimental results from swelling studies revealed that copolymers have lower rates of swelling and deswelling than the homopolymer.