• 한국환경농학회지
• /
• 제37권3호
• /
• pp.213-220
• /
• 2018

BACKGROUND: This study was carried out to determine characteristics of residual pesticides in time-dependent manner and calculate half-lives of the residual pesticides in fresh and dried Chinese matrimony vine. In addition, processing factors were calculated based on the residual concentrations in them. METHODS AND RESULTS: The test pesticides, etofenprox and fenitrothion, were sprayed onto the Chinese matrimony vine plants at once or twice (at seven-day interval) and then samples were collected at 0 (after 3 hours), 1, 3, 5 and 7 days after the last spraying. Dried samples were prepared in hot-air drying oven at $60^{\circ}C$ for 48 hours until water content of less than 20%. Residual concentrations of etofenprox in fresh and dried samples decreased by 54.0-60.9% after 7 days of the last pesticide-application. In case of fenitrothion, the concentrations were found to have decreased by 69.2-76.5%. Processing factors of etofenprox were 2.6-3.0 for the one-time spraying and 2.5-3.0 for the two-time spraying and those of fenitrothion were found to be 1.5-22 for the one-time spraying and 1.6-2.0 for the two-time spraying. First half-lives of etofenprox and fenitrothion in fresh and dried samples ranged from 5.0 to 6.3 and from 3.4 to 4.0 days, respectively. The third half-lives were found to be 15.0-18.9 and 10.2-12.1 days, respectively. CONCLUSION: Residual concentrations of the tested pesticides in the studied crop decreased, but those in the dried samples appeared to have increased. In addition, processing factor and half life were constant regardless of spraying times.

• Journal of Biosystems Engineering
• /
• 제22권2호
• /
• pp.137-150
• /
• 1997

To investigate the feasibility of a boom sprayer in the paddy field, an experimental boom sprayer for both broadcast and directed spraying to the lower part of rice plants was developed. The droplet deposition characteristics of the boom sprayers were experimentally compared to those of power sprayer. Water sensitive papers(WSP) and a machine vision system were used to evaluate the coverage rate and droplet density. It was shown that the broadcast application by the boom sprayer was the best coverage among the tested sprayers. Coverage tate and droplet density were affected by the distance between nozzles and the sprayer ground speed, The best result was obtained when the distance of 30cm and the speed of 1.7km/hr. The directed application showed inconsistency in overall droplet distribution. The inconsistency was judged to be caused by conflict between plants and boom extenders. The power sprayer showed a very wide range of droplet size distribution, relatively larger droplets and inconsistency in cove The power sprayer was judged to be inadequate for the low-volume precision application because of inconsistency in performance and difficulty in adjusting the spraying rate. Based on the droplet coverage characteristics, it was concluded that the self-propelled boom sprayer for the broadcast application was feasible for an alternative to the power sprayer in case of low volume, precision application in paddy condition.

• 한국식품조리과학회지
• /
• 제17권5호
• /
• pp.503-509
• /
• 2001

The effects of salting methods on textural properties of Kakdugi were evaluated during fermentation at 1$0^{\circ}C$ for up to 52 days. Kakdugi samples were prepared by 4 different salting methods at final salt concentration of 1.5%, which is appropriate for organoleptic quality. The salting methods for radish cubes(2 cm size) of Kakdugi were as follows; 1) Treatment S-1: spraying dry salt uniformly on to the radish cubes at 1.5%(w/w) and holding for 1 hr, 2) Treatment S-5: spraying dry salt uniformly on to the radish cubes at 1.2%(w/w) and holding for 5 hr, 3) Treatment B-1: brining radish cubes in a 8.5%(w/v) salt solution for 1 hr, 4) Treatment B-5: brining radish cubes in a 4.0%(w/v) salt solution for 5 hr. The contents of water soluble pectin, total soluble solid and PG activity were increased as the fermentation periods increased. A majority of total dietary fiber(TDF) consisted of soluble dietary fiber(SDF), and the amount of insoluble dietary fiber(IDF) was relatively small in Kakdugi during fermentation. Furthermore, an increase in SDF and a consequent decrease in IDF contents were observed with the fermentation time increased.

• 한국산업융합학회 논문집
• /
• 제22권5호
• /
• pp.553-559
• /
• 2019

Various types of nozzles have been used to cope with fire in ships. However, in Korea, precise nozzles that perform fine spraying function are required for fire fighting in case of fire in a ship, and most of these nozzles depend on imports. Therefore, in this study, we developed various types of nozzles to develop the water spray nozzle for evolving fire in the engine room of the ship, and developed an optimal nozzle through flow analysis and fire test. For this purpose, we selected the materials that can satisfy the characteristics of existing nozzle materials and developed the design technology and processing technology in the nozzle considering fluid flow to achieve optimal water spraying performance. In order to develop an optimal nozzle, the flow through the finite element analysis was first analyzed and the nozzle was manufactured. As a result of flow analysis of the developed nozzle, the maximum velocity at the outlets of four holes at 0.3 MPa was about 3m/s and about 0.15 MPa. In addition, when the pressure at the inlet was 1.8 MPa, it showed the outlet speed of about 18m/s and a pressure of 1.2 MPa.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제47권2호
• /
• pp.73-78
• /
• 2023

Currently, Hyphantira cunea Drury, the fall webworms (FWW), is one of the most severe insect pest for various landscaping trees and mulberry trees. In this study, we investigated whether FWW might be managed by Sodium saccharin (SAC) which is a food additive and not toxic to humans and environment. We found that FWW larvae treated with various concentrations of SAC showed dose-dependent delayed development and low survival rates. The lethal-concentration 50% of FWW larvae to SAC was 0.03 M. We also confirmed that SAC can be used to control FWW larvae attacking mulberry trees in the field. Compared to not-treated or tap-water-spraying control groups, SAC-spraying groups showed significantly higher mortality rates of FWW larvae (56.2%). Thus, SAC can be used for control FWW larvae in mulberry trees.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 추계 학술논문 발표대회
• /
• pp.50-51
• /
• 2016

Ozone is a strong oxidizing materials in the advanced water treatment facilities. However, due to such a strong oxidation, Ozone eroded waterproofing/corrosion on the concrete surface and caused performance degradation. Therefore, in this study, permeability experiment of metal spraying system by concrete surface treatment was conducted.

• 패션비즈니스
• /
• 제20권6호
• /
• pp.94-110
• /
• 2016

A necessity for infants, diapers are not only used over long durations, but are also in direct contact to the infants' skin, making the choice of diaper to be of utmost importance. Current interest in cloth diapers is rapidly increasing because of issues concerning the baby's health, green environment, and economy. However, previous researches on cloth diapers are limited to simply investigating the form and material of commercial cloth diapers. There are few in-depth researches for the optimal cloth diaper development. This is therefore a fundamental research for the development of optimized cloth diapers, and analyzes the difference in absorption depending on the placement of seam line (liner, darts, and I pattern), the locations of liquid spraying (1 cm and 8 cm ahead of the center), and the amount of liquid capacity (10 and 20 ml). Currently, the development of diaper patterns considers the crotch shape of the infants and the skin length deformation. As a result, in the case of the I-pattern, the horizontal seam line prevents water from spreading to the front and back, thus reducing the absorbed area. This result was more clearly visible when water was sprayed at the center. The effect of the seam line became more obvious when there was more water (20 ml); also, when water was sprayed at the center, more leakage was observed. Using the results of this research, implementation of horizontal seam is expected to prevent the upward spread of urine.

• 한국구조물진단유지관리공학회 논문집
• /
• 제22권4호
• /
• pp.68-75
• /
• 2018

기존의 정수처리 방법으로는 제거되지 않는 물질이 발생함에 고도정수 처리 시설의 도입이 증가하고 있다. 그러나 오존을 이용한 고도정수처리 시설의 내부 방수 방식재는 오존의 산화력에 의해 열화되며 콘크리트까지 영향을 미쳐 내구성 저하의 원인이 된다. 본 연구에서는 내오존성 및 내화학성이 뛰어난 금속 패널을 기존의 시공법 보다 손쉬운 방법으로 시공하기 위한 방법으로 금속용사 공법을 이용하여 수처리 시설 콘크리트 구조물의 열화를 원천적으로 방지하기 위한 마감공법 개발 연구의 일원으로 용사금속 종류 및 피막의 표면처리 방법에 따른 내오존성 평가를 실시하였으며, 오존처리 후의 부착강도를 평가하였다. 실험결과 용사금속 Ti이 용사 후에도 내오존성이 뛰어난 것으로 나타났으며 표면처리 방법으로는 테프론계 봉공처리제를 사용하여 마감하는 것이 내오존성 및 부착성능 확보에 가장 적합한 방법이라 판단된다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 추계 학술논문 발표대회
• /
• pp.224-225
• /
• 2013

Most of the building exterior wall cleaning robots use a water jet device for spraying water. However this method is sprayed excessive water usage than water quantity required for cleaning. And setting weight of the water pump cleaning device increase the weight of the building exterior wall cleaning robot. Therefor, this paper suggest that the mechanisms scatter minimal cleaning water using a spinning device of the building exterior wall cleaning robot.

• Journal of Biosystems Engineering
• /
• 제20권1호
• /
• pp.73-86
• /
• 1995

The automatic control system in the greenhouse have to be developed to the direction of considering various factors the variables such as condition of the cultivation and greenhouse, the properties and types of products. Therefore, it is more important to set up variables appropriately than the problems of automatic control system itself, and the automatic control system which satisfy these problems should be simplified in the aspect of operation. In addition, even the individual automations are not perfect yet, so more studies are required for the development of comprehensive automatic system in korea. This study was carried out to automatize environment control systems for greenhouse, especially from most intensive labor requiring parts such as watering, irrigating liquefied fertilizer, spraying chemicals, mixing and ventilation system, etc. The results are summarized as follows. 1. Control type tensiometer was expected to be desirable in the automation of watering system, therefore, a new tensiometer was designed and developed through this study. 2. The chemical spraying system developed through this study was found to be excellent in the aspect of operation. 3. When pulse type water discharge meter was used in the mixing of liquefied fertilizer and chemical solution, the error of mixing were range $\pm$0.1~0.15%. 4. The water level switch of electrod type used for controlling water level was found to be affective in both control performance and operation cost. 5. The water and level control system can be omitted if each tank size are standardized in accordance with greenhouse size, therefore, the installation cost might be significantly reduced. 6. The developed general controller was excellent in hardware parts, but still remained to be improved in software parts.