• 대한치과보철학회지
• /
• 제43권1호
• /
• pp.1-14
• /
• 2005

Statement of problem. Among the physical properties of adhesion luting cement, the aspect that requires the most important factor is the degree of solubility and water sorption. Dissolution or an inadequate due to excessive water sorption inside the oral cavity compromises the while concurrently increasing the susceptibility to secondary dental caries. Susceptibility to dissolution and difficulty of removing remnant cement from the gingival sulcus have hindered the use of dental resin cement in the clinical practice, but the improved characteristics of newer generation resin cements have interest in and enabled resin cements to be widely used in adhesion of fixed prosthesis, such as laminate veneers and all-ceramic crowns. Purpose. The purpose of this study is to compare and analyze the degrees of solubility and water sorption of a variety of resin cements widely used for clinical purposes with different curing methods. Material and methods. Self-curing resin cements, $Avanto^{(R)}$, $C&B^{TM}$ CEMENT and Superbond C&B cements comprised group 1, 2 and 3. The dual-curing resin cements $Panavian^{TM}$ F, $Calibra^{(R)}$ and $Variolink^{(R)}$ II were divided into groups 4, 5, and 6, respectively. The investigation was carried out using disc-shaped specimens as specified by ANSI/ADA Specification No. 27. The degree of water sorption, water solubility and lactic acid solubility of each test group was analyzed statistically leading to the following conclusion. Results. The degree of water sorption was shown to increase in the following order : group 6, 5, 4, 2, 1 and 3. There were significant differences between the water sorption of each group. Results of the degree of water solubility were shown to increase in the following order : group 6, 5, 4, 2, 1 and 3. Statistically significant differences were found between each group, with the exception of groups 1 and 3. Finally, the degree of lactic acid solubility was found to increase in the following order : group 6,5,4,2,3 and 1. Significant differences were found between each group. In general dual-curing resin cements displayed substantially lower values than self-curing resin cements with regard to water sorption, water solubility, and lactic acid solubility. Conclusions. From the results of this study, dual-curing resin cements show a significantly lower degree of water sorption and solubility than their self-curing counterparts. Clinically, when selecting resin cements, the product with a lower degree of water sorption and solubility are preferred. The results of this study indicate that the use-of dual-curing resin cements is preferable to self-curing cements.

• 대한치과의사협회지
• /
• 제57권5호
• /
• pp.264-268
• /
• 2019

Objectives: This study aimed to measure the water sorption / solubility of Biodentine, composite resin and glass ionomer cement. Materials and Methods: The materials used in this study were Biodentine(BD), Filtek Z250(FZ) and Ketac Molar(KM). Twenty disc-shaped specimens of each material were prepared of 6mm diameter and 1mm thickness. All specimens were desiccated for 24 hours and weighed(m1). After then, They were immersed in distilled water and stored at $37^{\circ}C$. 1 week later, They were washed with running water, wiped with absorbent paper and weighed(m2). Finally, They were dried for 24 hours and weighed(m3). Water sorption and solubility, net water uptake were calculated. Results: KM and BD showed high water sorption than FZ(P<0.05). KM and BD exhibited similar water sorption(P<0.05). BD exhibited high solubility than KM(P=0.012). BD exhibited high net water uptake than FZ(P=0.008). Conclusion: Biodentine showed higher water sorption, solubility and net water uptake than Filtek Z250 and Ketac Molar. Within limitation of this study, it is not recommended to use Biodentine for permanent restoration.

• Journal of Korean Dental Science
• /
• 제16권1호
• /
• pp.74-79
• /
• 2023

Purpose: Cention N (Ivoclar Vivadent) was a recently introduced alkasite-based restorative material that was expected to replace amalgam and glass ionomer cement. This material was an esthetic restoration with adequate mechanical strength and release of fluoride and calcium. The purpose of this study was to measure the water sorption and water solubility of Cention N and evaluate its long-term durability compared to other esthetic restorations (Resin-Modified Glass Ionomer cement [RMGIC], Giomer, Composite Resin). Materials and Methods: Twenty specimens each of Cention N (CN), Resin Modified-Glass Ionomer Cement (FJ), Giomer (BF), and Composite Resin (FZ) were made. After each specimen was completely dried in a desiccator for 24 hours using a vacuum pressure pump, the specimen was weighed (m1). After that, the specimen was immersed in distilled water at 37℃ for 7 days, stored in a drying oven, and weighed (m2). After drying completely for 24 hours in a desiccator, the specimen was weighed (m3) to calculate the water absorption and water solubility using Formulas 1 and 2. The measured values were statistically processed and analyzed using SPSS, and the significance level was set at 0.05. Result: When measuring water sorption, FJ (122.61 ㎍/mm³) showed significantly higher water sorption than CN (35.42 ㎍/mm³) (P<0.05). There was no significant difference between FZ (18.03 ㎍/mm³) and BF (14.76 ㎍/mm³) (P=0.930). When measuring water solubility, CN (6.65 ㎍/mm³) showed significantly higher water solubility than FJ (1.47 ㎍/mm³) (P<0.05). Conclusion: Cention N had lower water sorption than RMGIC, but higher water solubility, indicating that it is more vulnerable to moisture and has lessened long-term durability.

• 한국잠사곤충학회지
• /
• 제15권2호
• /
• pp.45-53
• /
• 1973

1. 용수의 M-알카리도가 높을수록 견층 sericin의 용해도는 급격히 증가 하였다. 2. 처리후의 시수 조사결과 M-알카리도 25p.p.m. 이상애서 산도는 완전히 중화되었다. 3. 시수의 M-알카리도가 상승함에 따라 처리후의 M-알카리도도 증가 하였다. 즉 견층을 처리한 시수의 M-알카리도가 높을수록 견층내의 M-알카리도 용출량도 증가하는 경향이 있었다. 4. 총경도는 시수의 M-알카리도가 증가 하는데 따라 감소하는 경향을 나타 내었다. .5. 用水의 산도가 높을수록 견층 sericin의 용해도는 현저히 감소되는 경향을 나타내었다. 6. 공시견 처리후의 수질변화를 보면 시수의 산도가 증가함에 따라 처리후 시수의 산도와 경도도 현저히 상승하는 반면 M-알카리도는 시수의 산도 20~40p.p.m. 에서 완전 중화되어 40p.p.m. 이상의 시수에서는 처리후 M-알카리도를 발견할 수 없었다. 7. 용수율의 철분 함유량이 증가하는데 따라 견층 sericin 용해도는 서서히 감소되는 경향이 있었다. 또한 망강에서는 용수중의 망강이 증가하는데 따라 견층 sericin 용해도는 다소 감소 하였으나 그 경향은 매우 완만하였다. 8. 견층 처리후의 수질변화를 보면 산도 M-알카리도 및 총경도가 상당량 견층에서 용출된 것을 볼 수 있었으나 이것은 시수의 pH 및 처리온도에 의한 것으로 보여지며 철분 함유량과는 아무런 관계도 인정할 수 없었다. 또한 망강에서는 시험후 수질변화를 조사한 결과 시수의 망강 함유량이 증가 하는데 따라 처리후의 M-알카리도는 감소 하였으나 산도 및 총경도는 증가되는 경향을 볼 수 있었다. 9. M-알카리도와 총경도를 변화하여 시험을 행한 결과 sericin 용해량이 증대되었다. 10. pH 및 총경도를 고정하고 M-알카리도 만을 변화시킨 경우 M-알카리도가 증가할 수록 sericin 용해도도 증대 되었다. 11. pH 총경도 및 M-알카리도를 고정하고 산도를 변화하여 시험한 결과 sericin 용해가 상당히 억제 되었다. 12. pH(6.8), M-알카리도를 고정하고 총경도만을 변화시킨 경우 sericin의 용해가 상당히 억제 되었다. 13. 각각의 수질 항목별로 sericin 용해에 미치는 작용면을 기본으로 분류하고 다시 "용해력증대" "용해력 보통" "용해력감소"의 구로 복합수질을 조제하여 시험 용해력 증대의 구는 용해력 감소의 구에 비하여 약 2.2%의 sericin 용해가 증대 되었으며 용해력 보통의 구에 있어 sericin 용해량은 2.4~2.9% 정도였다. 14. 4항 및 5항의 시험결과 견층 sericin 변성에 가장 크게 영향을 미치는 제사용수의 성분은 pH, M-알카리도, 산도 및 총경처이므로 앞으로 이상의 4개 항목을 기본으로 한 제사시험을 행하고 이 결과에 따라 최적의 제사용수 수질 조건을 설정코저 한다. 15. 동일 시수를 가지고 견층을 반복처리 하는데 따라 시수내의 완충력이 증가하여 견층 sericin의 용해량은 감소하는 경향이 있었다.견층 sericin의 용해량은 감소하는 경향이 있었다.

• 대한치과보철학회지
• /
• 제9권1호
• /
• pp.41-45
• /
• 1969

A major disadvantage of Dental cements is their solubility. So it is very important to measure the exact amount of solubility to select clinically suitable materials. The most common laboratory test for solubility is the measurement of disintegration in distilled water, as outlined in A.D.A. Specifications 8 and 9, In addition to the possible factors influencing the solubility, the experiments were all conducted in compliance with A.D.A. Specifications. The solubility of 2 Zinc Phosphate cements and 1 Silicate cement in time of dissolution, concentration of solute in dissolving medium, and type of dissolving medium were investigated. The following results were obtained. 1. Generally the materials were more soluble in organic acids than in distilled water. 2. The dissolution cements tends be minimized by tests utilizing prolonged storage in the same media. 3. In Acetic acid solution, Zinc Phosphate cements were more soluble than Silicate cement, and in Citric acid solution both were markedly more soluble. 4. Solubility was increased by continually presenting fresh liquid, unsaturated with solute, to the cement-water interface.

• Journal of Applied Biological Chemistry
• /
• 제43권2호
• /
• pp.79-85
• /
• 2000

Biodegradable films were prepared from roasted sesame meal and rice bran. Acetic anhydride, succinic anhydride, and formaldehyde were added to the film-forming solutions, and their effects on tensile strength, percent elongation, water vapor permeability, and water solubility of the films were studied. Roasted sesame meal did not form film without acylation or addition of formaldehyde. Acylated roasted sesame films had higher tensile strength and water-solubility, and lower % elongation than rice bran films. Acylation with acetic and succinic anhydrides increased tensile strength, percent elongation, and water solubility of rice bran films, but decreased water vapor permeability. Treatment with formaldehyde increased tensile strength of roasted sesame and rice bran films and % elongation of rice bran films, while reducing water-solubility of roasted sesame and rice bran films and water vapor permeability of rice bran films.

• Journal of Pharmaceutical Investigation
• /
• 제27권3호
• /
• pp.199-205
• /
• 1997

In order to formulate biphenyl dimethyl dicarboxylate(DDB) aqueous solutions, the effects of various solubilizing agents such as cosolvents(PG, PEG 400, glycerin, ethanol), surfactants,$(poloxamer\;407,\;Cremophor^{\circledR}\; RH40,\;Solutol^{\circledR},\;Tween\;80,\;sodium\;lauryl\;sulfate)$, complexation agent$(CELDEX^{\circledR}\;CH-20)$ and others(urea, niacinamide, propylene carbonate, HPMC) on the solubility of DDB in water were evaluated. The solubility of DDB in water was about $0.21\;{\mu}g/ml\;at\;20^{\circ}C$, while its solubility in PEG 400 was 5,000 times higher than that in water. 60% PEG 400 aqueous solution was selected as an optimum solvent system, and surfactants or other solubilizing agents were added to prevent DDB from recrystalization. The addition of surfactants in water increased the solubility of DDB from 15- to 34-fold, however, $CELDEX^{\circledR}\;CH-20$ and other agents studied showed negligible effects on the solubility of DDB in water. The 60% PEG 400 aqueous solution containing 5% $Cremophor^{\circledR}$　RH40 was appeared as the formula of choice. It showed acceptable physical stability after stored for 7 days at $4^{\circ}C$.

• Restorative Dentistry and Endodontics
• /
• 제10권1호
• /
• pp.17-30
• /
• 1984

This study was done to evaluate the hardness, water sorption and solubility values of twelve well known composite resins, and to compare each other. For the hardness test, the specimens were made in cylinder form with 4mm in diameter and 2mm in thickness as a modification of the American Society for Testing and New Materials, 1966, and for water sorption and solubility tests, the specimens were prepared in same shape of 20mm in diameter and 0.5mm in thickness as a modification of the ADA Specification No. 12. The results were obtained as follow: 1. The hardness range were from 17.9 to 87.5 respectively. As time passed by, the noticable change was evident in early 12 hours. 2. Of the water sorption. the range was from 0.38 to 0.93. The significant change was appeared within 12 hours and on 3 day by 1 week except four brands. 3. Of the water solubility, the range was 0.06 to 0.16. The highest value was found within early 24 hours. 4. Generally, four brands could be chosen as preferable products of hardness. water sorption and solubility tests according to the ADA Specification No. 12.

• Journal of Pharmaceutical Investigation
• /
• 제37권5호
• /
• pp.269-273
• /
• 2007

Poorly water-soluble ibuprofen and ethanol can be encapsulated in gelatin microcapsule by spray drying technique. To select an optimal formula of ibuprofen-loaded gelatin microcapsule which increased the ethanol content and ibuprofen solubility with the decreased amount of gelatin in the microcapsules, in this study, the effect of gelatin, ibuprofen and sodium lauryl sulfate on the ibuprofen solubility and the amount of ethanol and ibuprofen encapsulated in the gelatin microcapsule were investigated. Ibuprofen solubility and the amount of ethanol encapsulated increased as gelatin and sodium lauryl sulfate increased, reached maximum at 4% and 0.6%, respectively and then followed a rapid decrease. Furthermore, the ibuprofen solubility and the encapsulated ibuprofen content increased as the amount of ibuprofen increased, reaching maximum at 0.5% and beyond that, there was no change in the solubility and ibuprofen content. However, the encapsulated ethanol content remained same irrespective of the amount of ibuprofen. On the basis of increased ibuprofen solubility, our results showed that the formula of ibuprofen-loaded gelatin microcapsule at the ratio of gelatin/ibuprofen/sodium lauryl sulfate/water/ethanol of 4/0.5/0.6/30/70 with ibuprofen solubility of about $290\;{\mu}g/mL$ and ethanol content of about $160\;{\mu}g/mg$ could be a potential oral delivery system for poorly water-soluble ibuprofen.

• Corrosion Science and Technology
• /
• 제7권4호
• /
• pp.237-242
• /
• 2008

Physical properties of water, such as dielectric constant and ionic product, significantly vary with the density of water. In the supercritical conditions, since density of water widely varies with pressure, pressure has a strong influence on physical properties of water. Dielectric constant represents a character of water as a solvent, which determines solubility of an inorganic compound including metal oxides. Dissociation equilibrium of an acid is also strongly dependent on water density. Dissociation constant of acid rises with increased density of water, resulting in drop of pH. Density of water and the density-related physical properties of water, therefore, are the major governing factors of corrosion and environmentally assisted cracking of metals in supercritical aqueous solutions. This paper discusses importance of "physical properties of water" in understanding corrosion and cracking behavior of alloys in supercritical water environments, based on experimental data and estimated solubility of metal oxides. It has been pointed out that the water density can have significant effects on stress corrosion cracking (SCC) susceptibility of metals in supercritical water, when dissolution of metal plays the key role in the cracking phenomena.