• Tribology and Lubricants
• /
• v.35 no.5
• /
• pp.294-299
• /
• 2019

Most previous studies on water repellent surfaces using lasers rely on the use of pico- or femtosecond lasers. However, in industrial application, these methods have the disadvantages of high cost and low efficiency. In this study, we implement a hydrophobic surface using a high-power general-purpose diode laser. We have fabricated the microsurface using laser groove processing technology, and we present the correlation of wettability characteristics with space and width. The metal material is stainless steel (SUS 304), and the groove height during laser processing is set to $30{\mu}m$ to evaluate the wettability based on the gap and width of various grooves. Results show that the contact angle of the groove-shaped surface is increased by $40^{\circ}$ or more as compared with the surface without patterning, and the contact angle in the parallel direction is greater than that in the perpendicular direction. Results from contact angle hysteresis measurement experiments show that the groove width has a greater influence on the contact angle history than does the gap between grooves. In addition, the coating reveals that the contact angle can be increased using a chemical method and that the laser grooving process can further improve the wetting properties of the surface.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.5
• /
• pp.8-15
• /
• 2018

Films with special properties (e.g., water-repellent films, optical films, anti-reflection films, and flexible films) are referred to as functional films. Recently, there has been interest in fine patterning methods for film fabrication. In particular there have been many studies that use a UV nanoimprint process involving a UV curing method. In this paper, a polymer film was fabricated by the UV nanoimprint process with a micro-pattern, and its durability was evaluated by a wear test and a nano-indentation test. The film mechanical properties (such as coefficient of friction, hardness, and modulus of elasticity) were measured. Moreover, the choice of PUA type resin used in the UV nanoimprint process was confirmed to impact the durability of the thin film. Despite making the polymer film samples using the same method and PUA type resin, different coefficient of friction, hardness, and modulus of elasticity values were obtained. PUA 4 resin had the most favorable coefficient of friction, hardness, and modulus of elasticity. This material is predicted to produce a high durability functional film.

• Applied Chemistry for Engineering
• /
• v.5 no.2
• /
• pp.345-356
• /
• 1994

Each of the three cationized compounds synthesized previously, poly(OMA-co-DAMA)[PODC], poly(DMA-co-DAMA)[PDDC] and poly(EMA-co-DAMA)[PEDC] was blended with waxes, emulsifiers and cationized fatty carbamide(ODTCC) synthesized in this study for the preparation of some durable softening water-repellenting agents, PODCW, PDDCW and PEDCW. The results of washability, tearing strength, crease recovery and contact angle of the cotton fabrics treated with PODCW, PDDCW and PEDCW with and without textile finishing resin, showed remarkable improvement of the physical properties. Rating of water repellency of cotton fabric treated with PODCW was 80, but those treated with PDDCW and PEDCW were not high enough to use in industry. Proper curing temperature of the synthesized water-repelleting agents was $140^{\circ}C$; proper using concentration was 3wt%; sodium acetate was the best catalyst for water-repellenting agents among the used, and proper concentration was 0.6wt%. From the results of reaction mechanism of cellulosic fiber with water-repellenting agent and washability of the fibers treated with water-repellenting agents the prepared water-repellenting agent proved to be durable. Surface structures of cotton fabrics treated with water-repellenting agent were investigated by SEM.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.42 no.4
• /
• pp.378-383
• /
• 1997

Bird damages are often occurred at the seeding and seedling stages of crops. What the bird damage is preventing from the seeding and seedling of rice in the paddy would be very important to get high yield. Methiocarb was formulated as a bird repellent of crop seeding and seedling. Its effects on the seedling growth, related to the chemical injuries and the bird damages, were examined at the seeding and seedling growth stages of Anjungbyeo(Oryza sativa L.) with different types and amounts of methiocarb treatment in both pot and field experiments. In the pot experiment, bird damages were not occurred at all treatments of methiocarb, while bird damages were occurred at the control; 30, 85, and 100％ of damages at 5, 10, and 15 days after seeding, respectively. The ratio of seedling stand was not significantly different among all of treatments, methiocarb, methiocarb＋thiram, and control. However, the plant height and the number of seedling leaves at 15 days after seeding was shortened and lowered statistically more at treatment of methiocarb 15g than those of methiocarb 10g and control. The plant height at 35 days after seeding, showing the recovery degrees of chemical injuries, was significantly lowered in treatment of methiocarb＋thiram 15g, whereas the plant height of methiocarb FS 15g was not significantly differed from that of the control. In the field study, the bird damages were significantly reduced in treatment of methiocarb compared to that of the control. The plant height and the number of leaves at 25 days after seeding were not differed statistically among all of treatments. The chemical injuries were occurred in all treatments of methiocarb at 10 days after seeding, while they were not shown at 20 days after seeding.

• Korean Journal of Food Science and Technology
• /
• v.37 no.3
• /
• pp.364-371
• /
• 2005

Packaging bags and corrugated boxes prepared from newly developed antimicrobial packaging paper had greater ability to prolong freshness of packed fruits, and lower weight loss of fruits and microbial growth than non-treated bags and boxes. Addition of zeolite to paper greatly increased absorbance of aging hormone, $C_{2}H_{4}$, emitted from stored fruits, and contributed to decrease in putrefied fruits during storage. Water repellent agent such as alkyl ketone dimer played significant role in preventing functional paper from absorbing water from stored fruits, leading to preservation of fresh weight in stored fruits. Because rise in production cost of functional packaging paper could be offset by reduction of fruit and vegetable wastes, storing fruits and vegetables in functional paper containers was more economical than storing in non-treated containers.

• The Research Journal of the Costume Culture
• /
• v.19 no.3
• /
• pp.612-621
• /
• 2011

The process of making or cultivating indigo dyes is very cumbersome and complex. The dye extraction and dyeing methods using general plant dye, moth repellent dye, fast acting natural dye, and other dyes are very different. This research investigates the extraction of indigo dye and liquid dye extraction of polygonum(indigo) plants using calcium oxide water. While extracting indigo dye the concentration of purified indigo dye may be controlled by adjusting the pH level. Due to the various uses of dyes the adjustment of surface color must be considered. In regard to the change according to different concentrations of reducing agents, it was found that cotton fabrics and ramie fabrics show the highest color difference at 0.4% and 0.3% respectively. As the reduction temperature increases, the color difference increases as well. The maximum color difference was found to appear at $90^{\circ}C$. Cotton fabrics and ramie fabrics showed 70.55 and 67.01 respectively. The color difference increases as the concentration of dyes increases, but at a concentration of 300%, cotton fabrics was found to show 6.22PB in H value using the Munsell color system, containing purple and blue color. The pH of the polygonum dyes extracted through this experiment were adjusted by adding calcium oxide to the experimental water, without directly adding calcium oxide to the liquid polygonum extract. In a refine state, it was mixed with polygonum extract to extract a more refine and highly concentrated indigo dye. When lye and reducing agents are added to extracted indigo dye and sealed for long-term storage, it can be effective and easily used for dyeing.

• Environmental Engineering Research
• /
• v.20 no.2
• /
• pp.127-132
• /
• 2015

Perfluorooctane sulfonate (PFOS) and Perfluorooctanoic acid (PFOA) are persistent environmental pollutants, extremely stable, and possibly adversely affect human health. They are widely used in many industries and consumer goods, including sunscreen products. These substances are stable chemicals made of long carbon chains, having both lipid- and water-repellent qualities. The research objectives are (1) to find the most effective method for the preparation of semi-liquid samples by comparing solid phase extraction (SPE) and centrifugation after Pressurized liquid extraction (PLE), and (2) to determine the contamination levels of PFOS and PFOA in waterproof sunscreen samples. All sunscreen samples were analyzed by liquid chromatography coupled with tandem mass spectrometry (LC-MS/MS). Sunscreen samples were purchased from domestic and international brands sold in Thailand. Special chemical properties were considered for the selection of samples, e.g., those found in waterproof, sweat resistant, water resistant, and non-stick products. Considering the factors of physical properties, e.g., operation time, chemical consumption, and recovery percentage for selecting methods to develop, the centrifugation method using 2 mL of extracted sample with the conditions of 12,000 rpm and $5^{\circ}C$ for 1 hour after PLE was chosen. The highest concentrations of PFOS and PFOA were detected at 0.0671 ng/g and 21.0644 ng/g, respectively. Even though present concentrations are found at ng/g levels, the daily use of sunscreen products is normally several grams. Therefore, a risk assessment of PFOS and PFOA contamination in sunscreen products is an important concern, and more attention needs to be paid to the long-term effects on human health.

• Textile Coloration and Finishing
• /
• v.21 no.6
• /
• pp.1-11
• /
• 2009

Super-hydrophobic surface, with a water contact angle greater than $150^{\circ}$, has a self cleaning effect termed 'lotus effect'. We introduced super-hydrophobicity onto aramid/rayon mixture fabric with dual-scale structure by assembling silica nano-sol. Mixture fabric was treated with silica nano-sol, fluoric polymer using various parameters such as particle size, concentration. Silica nano-sol size were measured using particle size analyzer. Morphological changes by particle size were observed using field emission scanning electron microscopy(FE-SEM), contact angle measurement equipment. The contact angle of water was about $134.0^{\circ}$, $137.0^{\circ}$, $143.0^{\circ}$, $139.5^{\circ}$ and $139.0^{\circ}$ for mixture fabric coated with 100.2nm, 313.7nm, 558.2nm, 628.5nm and 965.4nm silica nano-sol, compared with about $120.0^{\circ}$ for mixture fabric coated with fluoric polymer. When we mixed particle sizes of 100.2nm and 558.2nm by 7:3 volume ratio, the contact angle of water was about $146.2^{\circ}$. And we mixed particle sizes of 313.7nm and 558.2nm by 7:3 volume ratio, the contact angle of water was about $141.8^{\circ}$. Also we mixed particle sizes of 558.2nm and 965.4nm by 7:3 volume ratio, the best super-hydrophobicity was obtained. In this paper, we fabricated the water-repellent surfaces with various surface structures by using four types of silica nano-sol, and we found that the dual-scale structure was very important for the super-hydrophobicity.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2018.04a
• /
• pp.45-45
• /
• 2018

We had already reported the successful germination for green pods of purple lady's slipper orchid (Cypripedium macranthos Sw.). The green pod methods is to take immature seeds in green capsules, sterilize the capsule, and take out the sterile seeds. This method, however, needs very critical time of harvest. The critical time of seed harvest changes depending upon the species, condition of the specimen, and climatic influence, and the right time lies between 5 and 12 weeks after fertilization. In this study, the mature seeds were collected after 120-130 days with hand-polination of lady's slipper orchids. Mature seeds are usually dormant and it has to be overcome, either with hormone or storing the seeds near freezing for two or three months to break dormancy. The seeds were first surface sterilized with 70% ethanol and then transferred 1% NaOCl for 10-15 minutes, followed by rinses 3 times with sterilized distilled water. The cypripedium seeds consists of an embryo within a seed coat known as a testa. The testa is water repellent and the seed has a large air space between the embryo and testa so the seed tends to float on water. We had resolved the problems with vacuum pump to soak water into the testa before sterilization. The seeds were placed on liquid or agar solidified germination media. Cultures were incubated at $24{\pm}1^{\circ}C$ in dark. The seeds were germinated in 6-8 weeks in liquid suspension culture (germination percentage over 18%); however, the seeds on agar solidified media took more than 5 months to germinate and the germination percentage less than 5%. The most effective media for liquid culture was 1/4 strength Murashige and Skoog (MS) medium with 50 ml/l coconut water ($4brix^{\circ}$) at pH 5.8.

• Korean Journal of Heritage: History & Science
• /
• v.44 no.3
• /
• pp.78-91
• /
• 2011

The Usuki Stone Buddha Statues in Japan are carved on mainly dark gray welded lapilli tuff accompanied by lenticular fiamme. This rock is composed of matrix which contains feldspar and opaque minerals with some phenocrysts of quartz and feldspar. The matrix is slight to highly welded. The statues have been weathered and weakened by salt and freezing of water. To enhance the mechanical properties of the rock, consolidants and water repellents were applied. The absorption ratio of the rock was highly decreased after the treatment of the water repellents, the consolidant OH 100, as well. Ultrasonic velocity revealed similarly higher values in the treated rock by KSE 300 and OH 100, compared to non-treated rock. KSE 300, especially, highly increased the Equotip surface hardness. All studied consolidants and water repellents were found to change the original color of the stone. SNL, specifically, resulted the significant change in color. In addition, KSE 300 were observed to improve resistance to weathering such as microcrack and fracture through freezing-thawing test after treatment.