• 상하수도학회지
• /
• 제25권3호
• /
• pp.419-428
• /
• 2011

Recycling as a stabilizer of industrial by-product can be terms of the proper handling of industrial by-product and positive side in terms of recycling of waste. This study was performed to evaluate has the possibility as stabilizer by primary processing Pre-Red Mud and Bio-Solids which are generated as waste in soils contaminated with heavy metals and compared the efficiency with steel slug being applied in an existing site. In evaluation of the arsenic-fixing ability of stabilizer in batch test, Bio-Solids have the similar arsenic-fixing ability with Pre-Red Mud, which shows 17% h igher arsenic-fixing ability than PS Ball. Since the stabilization periods using Bio-Solids and Pre-Red Mud are faster than the PS Ball, they seems to be better stabilizer than PS Ball to decrease the leaching of arsenic in contaiminated soil.

• 한국환경과학회지
• /
• 제23권1호
• /
• pp.97-104
• /
• 2014

The sludge flotation/thickening apparatus equipped a micro-bubble generating pump was used to investigate micro-bubble generating properties on operational parameters. We evaluated micro-bubble generating properties as results to be operated the apparatus by operational parameters which are pump discharge pressure, air/water ratio(A/W ratio), air flow rate, and water flow rate. Micro-bubble generating efficiencies in pumps without recycling flow and with 50% of recycling flow was found to be very efficient on optimum A/W ratio from 1.06 to 3.62% and optimum A/W ratio from 1.05 to 4.06%, respectively. In condition of 3.6% of A/W ratio, we showed that the apparatus could be generated 36,000 ppm of micro-bubble concentration to be optimum treatment efficiency in sludge thickening process.

• 한국산학기술학회논문지
• /
• 제6권2호
• /
• pp.189-194
• /
• 2005

2005년부터 도시 지역에서는 음식물 쓰레기 재활용 시설을 완료하여야 한다. 기존에 시설된 음식물 재활용 설비는 염분을 적절히 제거하지 못하여 퇴비로 사용할 경우 농작물에 해가 되는 경우가 많았다. 하수처리장과 연계하여 음식물류 폐기물의 300%정도의 물을 첨가하여 희석하는 방법이 염분제거에 효과적으로 사용되나, 처리장이 하수처리장과 연계할 수 없으면 이것은 새로운 오염원이 된다. 이 논문에서는 물을 적게 사용하여 염분을 효과적으로 제거할 수 있는 방법을 제시한다. 효과적인 초기 파쇄공정을 통하여 0.3%미만으로 염분을 저감하였고 완숙퇴비를 얻기 위하여 원적외선 가열을 적용하였다.

• 자원리싸이클링
• /
• 제4권1호
• /
• pp.20-24
• /
• 1995

어룡무연탄의 수력채탄시 산출될 수 있는 -200mesh의 분탄과 물위 슬러리를 COM(Coal Oil Mixture)화에 의하여 탈수시킴에 있어서 고분자응집제를 병행한 효과를 상징액의 빛 투과율로 조사하였다. 경유와 음이온 고분자응집제(A110)를 같이 사용하면 경유로만 응집시킬 때보다 낮은 교반속도에서도 COM이 형성되며 대단히 높은 상징액의 청정도를 보인다. 이때의 고분자응집제의 소요농도는 100g/t이고 경유의 소요량은 석탄량의 10%정도이다.

• 세라미스트
• /
• 제14권2호
• /
• pp.7-14
• /
• 2011

This paper has investigated physicochemical properties and conventional and environmental-friendly treatment methods of paper mill sludge to emphasize the importance and necessity of the sludge recycling. The paper mill sludge generally shows high contents of calcium and water, and is mostly discharged by landfill after incineration process rather than being recycled due to technical or economical problems. In recent years, however, several possible methods for recycling the paper mill sludge have been suggested for its sustainable process as follows; compost, raw material for the construction and paper industry, new energy source for reducing fossil fuel use and raw material of activated carbon for treating paper mill wastewater. Thus the authors suggest that practical recycling technologies of the paper mill sludge must be developed for substantiality in the paper industry through comprehending physicochemical compositions and generation status of the sludge and actively performing various related studies. Furthermore, this investigation could be used as preliminary information for the study on recycled paper development using paper mill sludge incineration ash.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.848-851
• /
• 2003

In this paper, a separating system for used CRT recycling is presented. Depend on manufacturer CRTs has small differences in dimension for the same model, but the dimensions of the panel are nearly same. To simplifying configuration of the system, we developed CRT fixing pallets for every model of CRT. The height of cutting position for every model of CRT will be same. The cutting machine has two rotating arm and use metal-bond type diamond cutting wheel. Instead of water, two vortex tube type air-coolers are used for the cooling of cutter. Workers in recycling factory are generally old people. Therefore, control program should be easy to use and operate. Thus we developed GUI with very simple interface.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.381-386
• /
• 2001

The dust generated from the electric arc furnace steel making process is classified as hazardous material by Korean Environmental Protection Acts, mainly because of the existence of water teachable Pb, Zn and Cd. Thus the treatment of EAF dust is being carried out to fulfill both the environmental aspect and recovery of valuable metals. To establish the proper process for recovering the valuable metals (Fe, Zn, Pb and Cd) and producing the non-toxic slag from EAF dust, using RAPID-10 system, feasibility study have been carried out. To find out the scale-up factor for designing the commercial scale EAF dust treatment process(capacity 50,000 ton EAF dust per year) entitled RAPID-50 system. The design and construction of RAPID-50 (RIST Arc Plasma Industrial Device) system for treating 50,000 ton of EAF dust per year is now undergoing. Overall plan for treating EAF dust generated in KOREA will be setup after successful operation (December, 2002) of RAPID-50 system.

• Membrane and Water Treatment
• /
• 제2권2호
• /
• pp.75-89
• /
• 2011

The predicting equations for mass transfer rate in cross-flow rectangular dialyzers with double flow and recycle, have been derived by mass balances. The recycling operation has two conflicting effects. One is the desirable effect of the increase in fluid velocity, resulting in an increased mass transfer coefficient. The other is the undesirable effect of the reduction in concentration difference due to remixing, resulting in decreased mass-transfer driving force. In contrast a single-pass device without recycling, considerable improvement in mass transfer is achieved if the cross-flow rectangular dialyzer of same size is operated with double pass and external recycling. It is concluded that recycle can enhance mass transfer, especially for larger reflux ratio.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 가을 학술논문 발표대회
• /
• pp.118-119
• /
• 2021

In this study, we confirmed the basic characteristics of paste and mortar 1:1, 1:2, 1:3 composition using concrete sludge solid content for the purpose of developing a resource-recycling cement secondary products. The 1:2 mortar formulation showed the best compressive strength. The steam curing strength is superior in the order of C20, BS40, BS20 and Control. it is judged that the FA combination is not suitable.

• 한국산학기술학회논문지
• /
• 제14권12호
• /
• pp.6597-6601
• /
• 2013

인구 증가와 함께 도시개발로 인한 지구온난화의 심각, 대기질 악화, 수질 오염 및 수생태계 파괴 등 도시환경 문제가 심화되고 있다. 또한 도시 개발 시 토지 피복면적 변화에 따른 불투수층 면적이 증가되는 인공적 요인과 이상기후에 의해 강우특성이 변화하는 자연적 요인으로 도시 열섬현황 심화, 용수 부족, 지하수위 저하, 침수 피해 등을 야기하여 물순환 건전성을 저해시키고 있다. 이를 해결하기 위해서는 체계적인 정보기술 인프라 및 환경센서 기술을 활용하여 도시 물순환 건전성을 제고시키기 위한 물순환시스템 구축기술 개발이 필요하다. 본 연구에서는 도시 내에서 물순환 건전성을 평가하는 방법으로 자연계 물순환 건전화율 및 인공계 물순환 건전화율 평가식을 제시하여, 도시화 및 산업화로 인해 발생하는 물순환 왜곡 정도를 정량적으로 분석하고, 도시 개발 후 물순환 건전성을 확보하기 위한 방법론을 제시하였다.