• The Korean Journal of Physiology and Pharmacology
• /
• v.20 no.5
• /
• pp.467-476
• /
• 2016

In the present study, we examined the effect of pertussis toxin (PTX) administered centrally in a variety of stress-induced blood glucose level. Mice were exposed to stress after the pretreatment of PTX (0.05 or 0.1 mg) i.c.v. or i.t. once for 6 days. Blood glucose level was measured at 0, 30, 60 and 120 min after stress stimulation. The blood glucose level was increased in all stress groups. The blood glucose level reached at maximum level after 30 min of stress stimulation and returned to a normal level after 2 h of stress stimulation in restraint stress, physical, and emotional stress groups. The blood glucose level induced by cold-water swimming stress was gradually increased up to 1 h and returned to the normal level. The intracerebroventricular (i.c.v.) or intrathecal (i.t.) pretreatment with PTX, a $G_i$ inhibitor, alone produced a hypoglycemia and almost abolished the elevation of the blood level induced by stress stimulation. The central pretreatment with PTX caused a reduction of plasma insulin level, whereas plasma corticosterone level was further up-regulated in all stress models. Our results suggest that the hyperglycemia produced by physical stress, emotional stress, restraint stress, and the cold-water swimming stress appear to be mediated by activation of centrally located PTX-sensitive G proteins. The reduction of blood glucose level by PTX appears to due to the reduction of plasma insulin level. The reduction of blood glucose level by PTX was accompanied by the reduction of plasma insulin level. Plasma corticosterone level up-regulation by PTX in stress models may be due to a blood glucose homeostatic mechanism.

• Journal of Pharmaceutical Investigation
• /
• v.37 no.2
• /
• pp.79-84
• /
• 2007

This study was aimed to establish analytical method of Bi to develop a guideline of the bioequivalence test of tripotassium dicitrato bismuthate (TDB). For this purpose, a simple, specific and sensitive inductively coupled plasma-mass spectrometry (ICP/MS) method were developed and validated in human plasma. Various concentrations of bismuth standard solution (0-25ng/mL) were prepared with distilled water and human blank plasma. To 10mL of the volumetric flasks, 2mL of blank plasma was added with 8ml of distilled water. Bi standard solution was added to prepare the calibration samples and injected into ICP-MS. The plasma samples obtained from volunteers given 3 tablets of bismuth (total 900mg as TDB) were analyzed as described above. As a result, the coefficients of variation were <20% in quantitation limit (0.2 ng/mL) and <15% at the rest of concentrations. The stability test by repeated freezing-thawing cycles showed that the samples were stable only for 24hr. The stability tested for samples with a short-term period of storage at room temperature and pre-treatment prior to the analysis showed very stable over 24hr. In 8 healthy Korean subjects received Denol tablets at the dose of 900mg bismuth, AUC, $C_{max},\;T_{max}$ and half-life $(t_{1/2})$ were determined to be $198.33{\pm}173.78 ng{\cdot}hr/mL,\;64.48{\pm}27.06 ng/mL,\;0.52{\pm}0.21 hr,\;and\;5.15{\pm}2.67 hr$, respectively, from the plasma bismuth concentration-time curves. In conclusion, the method was suitable for the determination of bismuth in human plasma samples and could be applied to bioequivalence test of bismuth tablet.

• The Korean Journal of Nuclear Medicine
• /
• v.7 no.1
• /
• pp.45-50
• /
• 1973

The changes of plasma renin activity, aldosterone concentration, serum sodium-, and potassium levels were studied before and after the water loading followed by diuretics injection. The materials were: 13 non-, 11 normal-, and 11 toxemic pregnancy cases. The plasma renin activity and aldosterone concentration of the cord and postpartum blood were also measured. Following were the results: 1. The plasma renin activity was elevated significantly in normal pregnancy, and slightly in toxemic pregnancy. The serum sodium levels were decreased in pregnancy. 2. The plasma aldosterone concentration was slightly decreased in normal pregnancy, and slightly increased in toxemic pregnancy, however, statistically insignificant. 3. The plasma renin activity of the cord and postpartum blood were lower than those of pregnancy cases. 4. The changes of plasma renin activity after the diuretic administration showed an initial increase, which recovered within 2 hours. These changes were the least in normal pregnancy, and the most in toxemic pregnancy. 5. The changes of plasma aldosterone concentration after the diuretic administration were similar to those of plasma renin activity, although the variations were not so wide.

• Applied Science and Convergence Technology
• /
• v.25 no.3
• /
• pp.51-55
• /
• 2016

The surface treatment of a titanium implant is investigated with a non-thermal atmospheric pressure plasma jet. The plasma jet is generated by the injection of He and $O_2$ gas mixture with a sinusoidal driving voltage of 3 kV or more and with a driving frequency of 20 kHz. The generated plasma plume has a length up to 35 mm from the jet outlet. The wettability of 4 different titanium surfaces with plasma treatments was measured by the contact angle analysis. The water contact angles were significantly reduced especially for $O_2/He$ mixture plasma, which was explained with the optical emission spectroscopy. Consequently, plasma treatment enhances wettability of the titanium surface significantly within the operation time of tens of seconds, which is practically helpful for tooth implantation.

• Journal of Environmental Science International
• /
• v.28 no.5
• /
• pp.495-502
• /
• 2019

This study was conducted to investigated the possibility of inactivating wilt germs (Fusarium oxysporum f. sp. radicis lycopersici) using Dielectric Barrier Discharge (DBD) plasma in a hydroponic system. Recirculating hydroponic cultivation system for inactivation was consisted of planting port, LED lamp, water tank, and circulating pump for hydroponic and DBD plasma reactor. Two experiments were conducted: batch and intermittent continuous process. The effect of plasma treatment on Total Residual Oxidants (TRO) concentration change, Fusarium inactivation and growth of lettuce were investigated. In the batch experiment, most of the Fusarium was inactivated at a TRO concentration of 0.15 mg/L or more at four-day intervals. There was no change in lettuce growth after two times of plasma treatment for one week. The intermittent continuous experiment consisted of 30-minute, 60-minute, and 90-minute plasma treatment in 2 day intervals and 30-minute treatment a one-day; most of the Fusarium was inactivated only by treatment for 30-minute every two days. However, if inactivation under $10^1CFU/mL$ is required, it will be necessary to treat for 60 minutes in 2 day intervals. The plasma treatment caused no damage to the lettuce, except the 30 min plasma treatment ay the one-day interval. It was considered that the residual TRO concentration was higher than that of the other treatments.

• Journal of Bio-Environment Control
• /
• v.28 no.3
• /
• pp.197-203
• /
• 2019

This study was carried out to investigate the effect of chlorine water and plasma gas treatment on the quality and microbial control of Latuca indica L. baby Leaf during storage. Latuca indica L. baby leaves were harvested from a plant height of 10cm. They were sterilized with $100{\mu}L{\cdot}L^{-1}$ chlorine water and plasma-gas (1, 3, and 6hours), and packaged with $1,300cc{\cdot}m^{-2}{\cdot}day^{-1}{\cdot}atm^{-1}$ films and then stored at $8{\pm}1^{\circ}C$ and RH $85{\pm}5%$ for 25days. During storage, the fresh weight loss of all treatments were less than 1.0%, and the carbon dioxide and oxygen concentrations in packages were 6-8% and 16-17%, respectively for all treatments in the final storage day. The concentration of ethylene in the packages fluctuated between $1-3{\mu}L{\cdot}L^{-1}$ during the storage and the highest concentration of ethylene was observed at 6 hours plasma treatment in the final storage day. The off-odor of all treatments were almost odorless, the treatments of chlorine water and 1 hour plasma maintained the marketable visual quality until the end of storage. Chlorophyll content and Hue angle value measured at the final storage day were similar to those measured before storage in chlorine water and 1 hour of plasma treatments. E. coli was not detected immediately after sterilization in all sterilization treatments. After 6 hours of plasma treatment, the total bacteria fungus counts were lower than the domestic microbial standard for agricultural product in all sterilization treatments. The total aerobic counts in the end storage day increased compared to before storage, whereas E. coli was not detected in all sterilization treatments. The sterilization effect against bacteria and fungi was the best in chlorine water treatment. Plasma treatment showed sterilization effects, but within a prolonged period of time. In addition, the sterilization effect decreased gradually. These results suggest that chlorine water and plasma treatment were effective in maintaining Latuca indica L. baby Leaf commerciality and controlling microorganisms during postharvest storage.

• The Korean Journal of Physiology
• /
• v.21 no.2
• /
• pp.297-304
• /
• 1987

A study was carried out to find out the relationship between arginine vasopressin (AVP) release and plasma osmolality in 15 young men (age: 21.4 yr). After an overnight fasting, wale. (20 ml/kg) was imbibed, and venous blood and urine samples were collected every 30 min for 90 min. then 5% saline was infused (0.06 ml/min/kg) for 120 min. AVP was extracted on Sep-Pak column and measured by radioimmunoassay. Under basal condition, plasma osmolality (pOsm), AVP (pAVP) and aldosterone (pAldo) levels were 286.5 mOsm/kg, 1.1 pg/ml, and 140 pg/ml, respectively. pAVP became undetectable during maximum water diuresis, and increased in response to hypertonic saline infusion. pAVP level began to increase when pOsm was above 280 mOsm/kg. Changes in urinary AVP excretion (uAVP) was parallel to pAVP levels. The fall in pAVP was followed by a decrease in uAVP, uOsm and an increase in free water clearance, while the later rise in pAVP was followed by an increase in uAVP, uOsm and a decrease in free water clearance. When pooling all data together, relationships between pAVP and pOsm, and uAVP and uOsm were best expressed by an exponential relationship (r=0.78, 0.86, respectively). pAldo level decreased to 71 pg/ml after water ingestion, and decreased further to 30 pg/ml 2 hr after 5% saline infusion. Even at the same pNa, pAldo level during dehydration state was significantly higher than during hydration state. Negative exponential relation (r=-0.59) was observed between pAldo and pNa. Response to change in body fluid volume was greater in aldosterone than in AVP release.

• The Korean Journal of Food And Nutrition
• /
• v.16 no.2
• /
• pp.138-145
• /
• 2003

The effects of adding egg white, bovine plasma protein(bpp), gelatin and gluten on the rheological properties of squid meat paste product(squid meat kamaboko) were examined by the measurements of jelly strength, texture, moisture content, water holding capacity(WHC) and folding test. The optimum added levels for jelly strength of squid meat kamaboko were 4% of egg white, 5% of bovine plasma protein, 3% of gelatin and 4% for gluten. However, it is no increase that at added additives of over this concentrations were. Bovine plasma protein gave the highest jelly strength among the all additives at every concentration. Folding tests value of the optimum added levels were all B value. In this case moisture content and water holding capacity were 72.06∼73.78% and 88.53∼91.11% in jumbo squid, also flying squid were 71.91∼72.89% and 90.21∼93.25%, respectively. The additives were increased the jelly strength, hardness and water holding capacity(WHC), and these effects were eliminated by adjusting the water-content to the value of the control sample without additives.

• Textile Coloration and Finishing
• /
• v.6 no.3
• /
• pp.27-36
• /
• 1994

In order to produce a water repellent surface on polyester fabric, samples were treated in the atmosphere of $CF_4$ glow discharge plasma. The samples used in the study were ployester fabric and poyester film. The purpose of film treatment is for the comparison of hydrophobicity with fabric sample at same treatment condition. Radio frequency(13.56MHz) generator was used as electric source and its in put power is 100 Watt. Water repellency was evaluated by contact angle measurement. Result obtained are as follows. 1) Fiber interstice of original fabric was ana lysed as 0.43$\mu$m, and this value was sufficiently ideal for making water repellent fabric. 2) The most favorable setting position of substrate was the center area between two electrodes. 3) Fabric contact angle was higher than film contact angle at same treatment condition, and its difference was more than 50${\circ}$. And it was incapalbe of fabric contact angle measurement when the film contact angle was less than 90${\circ}$. because the fabric is susceptible to absorption of water by the capillary effect. 4) Fabric contact angle can not revealed the precise defferences of surface hydrophobicity, however, the film contact angle showed the real hydrophobic nature. 5) It was not sufficient method to evaluate the hydrophobicity of fabric surface by merely measure of the water contact angle. 6) It showed high water repellent nature at 0.06 torr of $CF_4$ plasma gas pressure and duration of 45 seconds treatment, and it can not be anticipated more improved nature if the pressure and duration of treatment time were increased.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2013.05a
• /
• pp.170-170
• /
• 2013

We present a novel etching technique for 2-dimentional (2-D) hexagonal boron nitride (h-BN) by using capacitively coupled plasma (CCP) of oxygen combined with a post-treatment by de-ionized (DI) water. Oxygen CCP etching process for h-BN has been systematically studied. It is found that a passivation layer was generated to obstruct further etching while it can be easily and radically removed by DI water. An essential cleaning effect also has been observed in the etching process, organic residues are successfully removed and the surface roughness has much decreased. Considering h-BN is the most important 2-D dielectric material and its potential application for graphene to silicon-based electronic devices, such an etching method can be widely used to control the 2-D h-BN thickness and improve the surface quality.