• 한국물환경학회지
• /
• 제22권5호
• /
• pp.856-864
• /
• 2006

For estimating the minimum discharge to maintain a river, low flow analysis is required and long term runoff records are needed for the analysis. However, runoff data should be estimated to run a hydrologic model for ungaged river basin. For the reason, parameter estimation is crucial to simulate rainfall-runoff events for those basins using Tank model. In this study, only runoff data recorded for dry season are used for parameter estimation, which is different to other methods based on runoff data recorded for wet and dry seasons. The Harmony Search algorithm is used to determine the optimum parameters for Tank model. The coefficient of determination ($R^2$) is served as the objective function in the Harmony Search. In cases that recorded data are insufficient, the recording interval is changed and Empirical CDF is adopted to analyze the estimated parameters. The suggested method is applied to Yongdam dam, Soyanggang dam, Chungju dam and Seomjingang dam basins. As results, the higher $R^2s$ are obtained when the shorter recording interval, the better recorded data quality, and the more rainfall events recorded along with certain rainfall amount is. Moreover, when the total rainfall is higher than the certain amount, $R^2$ is high. Considering the facts found from this study for the low flow analysis, it is possible to estimate the parameters for Tank model properly with the desired confidence level.

• Tribology and Lubricants
• /
• 제31권2호
• /
• pp.35-41
• /
• 2015

A water-pump located in the cooling area of a car circulates cooling water. A particular bearing element, known as a water-pump bearing, installed in the rotating part carries the entire load. The failure of this water-pump bearing has a direct impact on the failure of the automobile engine, and so securing its reliability is crucial. Several researchers have examined the design principles of the water-pump bearing, but there are no reports on the life characteristic of the bearing yet. Herein, we report the construction of test equipment to reproduce the spalling of the roller contact, which is the main failure mode of the chosen water-pump bearing. We chose the radial load as an accelerated stress factor and validated the failure mode by monitoring the surface defects. We conducted the accelerated life test after determining the accelerated stress level through a combination of finite element analysis and a preliminary test. In the life tests, we used an accelerometer to perform failure diagnosis. In the last stage of this study, we present a statistical reliability analysis. Thus, we fully estimated the shape parameter of the water-pump bearing, accelerating level on the load , and the lifetime (MTTF and B₁₀ life) under real use conditions, and finally proposed an interval estimation value considering the uncertainty of the estimated value.

• 한국방재학회 논문집
• /
• 제7권2호통권25호
• /
• pp.65-71
• /
• 2007

본 연구는 만곡하천의 단면을 만곡률에 따라 1 2차원 수치해석을 실시하였다. 수치해석 결과 유 출입각에 따른 수위 편차가 발생하였으며, 홍수량 변동에 따른 편차가 증가하였다. 2차원 수치모형에 의한 수위편차를 보면 유 출입각 105도 일 때 홍수량 500CMS에서 최대경사가 6.67%가 나타났다. 우측은 90도를 초과하는 경우 1차원 수치모형과의 편차가 감소하였으며, 좌측의 수위는 105도를 초과하는 경우 1차원 수치모형과의 편차가 감소하는 것을 확인하였다. 이는 90도 이상의 만곡하천의 경우 수치해석보다는 수리모형실험을 통하여 검증하는 것이 바람직하겠다.

• 농촌계획
• /
• 제24권2호
• /
• pp.109-114
• /
• 2018

In this study, we estimate the greenhouse farmers' willingness to pay of agricultural water supply through pipeline. First, in the questionnaire design, orthogonal design and block design were used to enhance the ease of survey. Second, the theoretical model was constructed through the setting of the probability utility function, and the parameters were estimated by using the conditional logit model. Third, all of the estimation coefficients were statistically significant at the 1% significance level. The results of analysis are summarized as follows. First, the probability of selection is increased when maintenance is carried out by Korea Rural Community Corporation or local government. Second, the probability of selection is increased when agricultural water supply through pipeline is higher than the current level. Third, if the Korea Rural Community Corporation carries out maintenance management, the marginal willingness to pay is 44 won per ton. And if the local government carries out maintenance management, the marginal willingness to pay is 25 won per ton. Fourth, according to the quality level of agricultural water supply, the marginal willingness to pay is 101 won, 114 won and 120 won per ton, respectively. This study can be used as a basic data on the cost setting for agricultural water supply through pipeline.

• 한국수자원학회논문집
• /
• 제46권4호
• /
• pp.327-334
• /
• 2013

본 연구에서는 단면수리실험으로 다양한 실험파 조건과 유수실 폭(B)을 변화시키면서 유공부 길이(S)와 반사율의 관계를 검토하여 유공 1실인 유공구조물의 정수면 아래 최적 유공부 길이를 제시하였다. 입사파로 불규칙파를 적용함에 따라 최저 반사계수는 상대 유수실 폭($B/L_s$)이 $B/L_s{\approx}0.15$에서 발생하였다. 유공부 길이와 입사파고와의 관계를 고려한 상대 유공부 길이($S/H_s$)는 $S/H_s{\approx}2.5$에서 최저 반사계수를 보였으며, 이는 정수면 아래 유공부 길이가 입사파고의 약 2.5배일때 최적임을 의미하는 것이다.

• 대한환경공학회지
• /
• 제22권1호
• /
• pp.149-157
• /
• 2000

깅릉 남대천 수계에서 처음으로 용존 비소(As)의 분포와 거동에 관한 연구가 수행되었다. 풍수기인 1997년 8월 28일(최종 방류량; $1.97{\times}10^6$ 톤/일)과 갈수기인 동년 11월 21일(최종 방류량; $0.13{\times}10^6$ 톤/0일). 두 차례에 걸쳐 조사된 As의 농도 분포는 같은 시기에 조사된 다른 중금속들과 다소 차이를 보인다. 도암댐 보다 오봉댐 유출수의 농도가 미소하게 높았고, 갈수기인 11월 하류부의 농도 급증현상도 나타나지 않았을 뿐 아니라 풍수기인 8월 하류부의 농도보다도 낮았다. 그리고 두 조사기간사이의 농도차가 미비하며, 원시적인 강들과 세계평균치에 비해서도 비교적 낮은 농도로서 남대천 수계에서는 As의 인위적인 오염원이 없고, 자연적인 배경농도(background level) 수준임을 알 수 있다. 하구에서 담수와 해수가 혼합되는 과정에서는 외부 유입이나 제거 기작없이 염분과 함께 직선적으로 증가하는 보존적인 분포를 보이며, 남대천을 통하여 동해로 유출되는 As의 양은 연간 65.12kg 정도이다.

• Structural Engineering and Mechanics
• /
• 제86권5호
• /
• pp.621-633
• /
• 2023

Stability analysis and support system estimation of the Beheshtabad water transmission tunnel is investigated in this research. A combination approach based on the rock mass rating (RMR) and rock mass quality index (Q) is used for this purpose. In the first step, 40 datasets related to the petrological, structural, hydrological, physical, and mechanical properties of tunnel host rocks are measured in the field and laboratory. Then, RMR, Q, and height of influenced zone above the tunnel roof are computed and sorted into five general groups to analyze the tunnel stability and determine its support system. Accordingly, tunnel stand-up time, rock load, and required support system are estimated for five sorted rock groups. In addition, various empirical relations between RMR and Q i.e., linear, exponential, logarithmic, and power functions are developed using the analysis of variance (ANOVA). Based on the significance level (sig.), determination coefficient (R²) and Fisher-test (F) indices, power and logarithmic equations are proposed as the optimum relations between RMR and Q. To validate the proposed relations, their results are compared with the results of previous similar equations by using the variance account for (VAF), root mean square error (RMSE), mean absolute percentage error (MAPE) and mean absolute error (MAE) indices. Comparison results showed that the accuracy of proposed RMR-Q relations is better than the previous similar relations and their outputs are more consistent with actual data. Therefore, they can be practically utilized in designing the tunneling projects with an acceptable level of accuracy and reliability.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2001년도 학술발표회 발표논문집
• /
• pp.30-33
• /
• 2001

This study was carried out to estimate the runoff pollutant loadings for water quality management in Boryung freshwater reservoir watershed. The hydrological monitoring system were operated for water level measurement during $1999{\sim}2000$ and temporal variation of water quality constituents such as pH, EC, total nitrogen, total phosphorus were analysed, periodically. Monthly runoff volumes by TANK model and potential pollutant loadings calculated by unit method were compared with measured values.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -3
• /
• pp.1479-1482
• /
• 2002

In this work, a recursive parameter estimation algorithm estimates the mathematical model of steam generators every time step and a receding horizon controller is designed by using this estimated linear steam generator model of which parameters change as time goes on. It was shown through application to a linear model of steam generator that the proposed controller has good performance.

• Nuclear Engineering and Technology
• /
• 제53권8호
• /
• pp.2534-2546
• /
• 2021

Nuclear emergency preparedness and response is an essential part to ensure the safety of nuclear power plant (NPP). Key support technologies of nuclear emergency decision-making usually consist of accident diagnosis, source term estimation, accident consequence assessment, and protective action recommendation. Source term estimation is almost the most difficult part among them. For example, bad communication, incomplete information, as well as complicated accident scenario make it hard to determine the reactor status and estimate the source term timely in the Fukushima accident. Subsequently, it leads to the hard decision on how to take appropriate emergency response actions. Hence, this paper aims to develop a method for rapid source term estimation to support nuclear emergency decision making in pressurized water reactor NPP. The method aims to make our knowledge on NPP provide better support nuclear emergency. Firstly, this paper studies how to build a Bayesian network model for the NPP based on professional knowledge and engineering knowledge. This paper presents a method transforming the PRA model (event trees and fault trees) into a corresponding Bayesian network model. To solve the problem that some physical phenomena which are modeled as pivotal events in level 2 PRA, cannot find sensors associated directly with their occurrence, a weighted assignment approach based on expert assessment is proposed in this paper. Secondly, the monitoring data of NPP are provided to the Bayesian network model, the real-time status of pivotal events and initiating events can be determined based on the junction tree algorithm. Thirdly, since PRA knowledge can link the accident sequences to the possible release categories, the proposed method is capable to find the most likely release category for the candidate accidents scenarios, namely the source term. The probabilities of possible accident sequences and the source term are calculated. Finally, the prototype software is checked against several sets of accident scenario data which are generated by the simulator of AP1000-NPP, including large loss of coolant accident, loss of main feedwater, main steam line break, and steam generator tube rupture. The results show that the proposed method for rapid source term estimation under nuclear emergency decision making is promising.