• 화약ㆍ발파
• /
• 제28권1호
• /
• pp.71-75
• /
• 2010

한일해저터널 구상에 이어 한중해저터널에 관한 토론이 공개적으로 시작되었다. 이에 우리 기술진의 현재의 역량과 정치적 경제적 협조방안을 열거하였으며 특히 해저터널 건설시의 기술적 문제점과 해결과제를 조사 연구하였고 이에 따른 방안을 제시하였다. 굴착기술 측면에서는 깊은해저에서의 단층대 등 암반상태를 감안한 발파 방수처리기술 등을 고려 해야겠다. 완공 후 터널내 화재와 누수관리 등에 더욱 유의하여 설계 시공하고 고급 건설사업관리제도(CMP)와 가치공학 및 창조경영공학(CVS)등을 적용해야 할 것으로 생각된다.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
• /
• pp.88-94
• /
• 2003

In recent, as Republic of Korea has been interested in environmental problem increasingly and became a member of many organizations or institutions related to environmental preservation such as a Ramsar convention, fundamental and completed methods to prevent ground water's drying up and leakage in tunnel excavation are requested. In this paper, we have studied the anticipated problems by tunnel excavation under the wetland and described the effective designed method to maintain the wetland's ecosystem environment. To accomplish this purpose, firstly, we investigated the wetland's ecosystem, ground's hydraulic properties and analysed the foreign similar case for tunnel excavation near the wetland. And by numerical analysis, we analyzed the runoff and infiltration quantity of water and hydraulic behaviour properties by saturation and unsaturation concept in rock mass and wetland. Finally, we established the effective countermeasure to minimize the ecosystem's bad influence by tunnel excavation.

• 한국건축시공학회지
• /
• 제6권4호
• /
• pp.85-92
• /
• 2006

Urethane, epoxy, acrylic have common property to adhere on the concrete dried surface in the waterproofing materials at present. In the wet condition, however, the materials such as urethane, epoxy, acrylic need a long hardening time and it become a reason of water leakage as the materials breaking down. it is one of the problem to adhere to the substrate. Therefore, in this thesis, I focused to assure the structural safety and durability and quality for waterproofing and safe of construction cost by cut down the cost of labor and reduce the term of works as searching the application of field condition for high adhesive spray type of degenerated and rubberized asphalt membrane material.

• Nuclear Engineering and Technology
• /
• 제56권6호
• /
• pp.1950-1958
• /
• 2024

For the pressurized water reactor two-step calculation, the traditional assembly homogenization and two-group neutron diffusion calculation have been widely used. When it comes to the core pin-by-pin simulation, many models and techniques are different and unsettled. In this paper, the homogenization methods based on the pin discontinuity factors and super homogenization factors are used to get the pin-cell homogenized parameters. The heterogeneous leakage model is applied to modify the infinite flux spectrum of the single assembly with reflective boundary condition and to determine the diffusion coefficients for the SP3 solver which is used in the core simulation. To reduce the environment effect of the single-assembly reflective boundary condition, the online method for the SPH factors updating is applied in this paper, and the functionalization of SPH factors based on the least-squares method will be pre-made alone with the table of the group constants. The fitting function will be used to update the thermal-group SPH factors with a whole-core pin-by-pin homogeneous solution online. The three-dimensional Watts Bar Nuclear Unit 1 (WBN1) problem was utilized to test the performance of pin-by-pin calculation. And numerical results have demonstrated that PWR pin-by-pin core calculation has more accurate results compared with the traditional assembly-homogenization scheme.

• 인터넷정보학회논문지
• /
• 제9권6호
• /
• pp.117-125
• /
• 2008

유비쿼터스 응용 시스템에 대한 관심의 증대와 함께 소형화된 임베디드 컴퓨팅 시스템의 필요성은 커지고 있다. 이러한 가운데 ARM 임베디드 프로세서는 기능의 우수성과 높은 활용도로 인해 임베디드 시스템 시장에서 높은 점유율을 보여주고 있다. 본 논문에서는 ARM 마이크로컨트롤러를 이용해 RTD-1000 컨트롤러 구성과 개발을 위한 최적의 방법을 제안하였다. 기존 RTD-1000은 케이블의 단선, 단락, 파손 등의 진단이 가능한 TDR를 탑재하여 구리선을 삽입한 감지관의 누수 및 누유, 파괴 등을 원격으로 감지할 수 있는 기기이다. 실제로 시공되어 현장에서 운영되고 있는 RTD-1000은 시스템 운영에 필요한 범위에 비해 리소스 낭비가 크고 그에 따라 구축비용이 높다는 단점을 가지고 있다. 또한, 발열이 심해 별도의 냉각장치가 요구되며, 하드 디스크와 같은 보조저장장치의 사용으로 고장 발생율과 전류의 소비가 커지는 등의 문제점을 야기하였다. 본 논문에서는 도출된 문제점의 해결 방법으로 ARM 마이크로컨트롤러 기반의 RTD-1000A 임베디드 시스템을 제안하고 시뮬레이션 하였다.

• 대한조선학회논문집
• /
• 제29권4호
• /
• pp.104-113
• /
• 1992

압력이 차 있는 백이 물에 부분적으로 잠겨서 동요하고 있을 때의 유체역학적 문제가 다루어졌다. 쌍동형 공기부양선(SES)의 선미에는 공기의 유출을 막기위해 공기압이 채워진 백을 설치하고 있는데, 백에 의한 힘이 종동요에 큰 영향을 미친다. 백의 모양은 안과 밖의 압력차에 의해서 결정되므로, 유체동압력을 구하면 백의 모양을 알 수 있는데, 백의 모양변화를 알아야지만 유체동압력을 구할 수가 있다. 따라서 백 표면에서의 경계조건의 형태는 자유표면 경계와 더불어서 움직이는 경계가 된다. 본 논문에서는 이 문제를 정식화하고 선형화를 하였다. 또한 백이 동요할 때의 방사문제에 대한 계산예를, 백을 강체로 가정했을 때의 비교하여, 보여주고 있다. 여러가지의 백내의 압력값, 또 물에 잠긴 깊이에 대해서 계산이 이루어졌다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.392-399
• /
• 2005

Shear modulus (or rigidity) of dam material is an important parameter which can be directly associated with the deformation of dam. Seepage or leakage of water can cause the defects or cracks of dam body. The existence of cracks and rigidity of dam body are decisive information for the estimation of dam safety. Rigidity of material is mainly determined from S-wave velocity and the defects of dam body can be detected by seismic reflection survey. Therefore, seismic reflection survey will be a desirable method which can give a solution about dam safety problem. Among various physical properties of dam body, S-wave velocity is the most important information but it is not easy to get the information. In this study, diverse measuring techniques of S-wave reflection survey were attempted to get the information about S-wave velocity of dam body. Ultimately, S-wave velocity could be estimated by the analysis of SH reflection events which can be easily observed in shot gather data obtained from SH measuring technique. Meanwhile, P-wave reflection survey was also performed at the same profile. P-beam radiation technique which can reduce the surface waves and reinforce the P-wave reflection events was applied for giving a help to analyse P-wave velocity. In the end, P-and S-wave velocity, Vs/Vp, Poisson's ratio distribution of the vertical section under the profile could be acquired.

• 한국건축시공학회지
• /
• 제7권1호
• /
• pp.99-106
• /
• 2007

Water leakage could be caused deterioration of environmental conditions, user condition, reduction of life span and long term safety in underground concrete structure. Many materials and construction method to repair on these problems have been developed, however, it is not proper to successful repair or raise problem of increasing repair cost However, there are many limitations as practical appraisal methods due to different view of reliability for test methods. Because, it was not enough that the technical objectivity could be lack and also application of environmental condition is inadequate. In this paper, we suggest varied test methods divided to appraisal for property of matter, construction, manufacturing, specification and maintenance, friendly environmental condition. It could be more practical as a objective standard considering various angles. In summery, it should be subdivided and differentiated to accomplish proper application and to select proper materials and construction method for repair even if the synthetical condition is very complicated.

• 대한조선학회논문집
• /
• 제52권3호
• /
• pp.206-221
• /
• 2015

Supercavitation is a modern technique which can be used to surround an underwater vehicle with a bubble in order to reduce the resistance of the vehicle. When the vehicle is at low speed in the deep sea, the cavitation number is relatively big and it is difficult to generate a cavity large enough to envelope the vehicle. In this condition, the artificial cavity, called ventilated cavity, can be used to solve this problem by supplying gas into the cavity and can maintain supercavitating condition. In this paper, a relationship between the ventilation gas supply rate and the cavity shape is determined. Based on the relationship a ventilation rate control is developed to maintain the supercavitating state. The performance of the ventilation control is verified with a depth change control. In addition, dynamics modeling for the supercavitating vehicle is performed by defining forces and moments acting on the vehicle body in contact with water. Simulation results show that the ventilation control can maintain the supercavity of an underwater vehicle at low speed in the deep sea.

• 대한전자공학회논문지
• /
• 제23권1호
• /
• pp.65-73
• /
• 1986

Experiment have been conducted about thin oxide characteristics according to O2/N2 ratio needed for EEPROM cell fabrication. As a result, we think that there is no problem even if we grow oxide layer with large O2/N2 ratio and short exidation time and when the water is implated by As before oxidation, the oxide breakdown field is about IMV/cm lower than that is not implanted. Especially, the thin oxide characteristic seems to be affected largely by wafer cleaning and oxidation in air. On the basis of these, tunnel type EEPROM cell is fabricated by 3um CMOS process and its characteristic is studied. Tunnel oxide thickness(100\ulcorner is chosen to allow Fowler-Nordheim tunneling to charge the floating gate at the desired programming voltage and tunnel area(2x2um\ulcorneris chosen to increase capacitive coupling ratio. For program operation, high voltage (20-22V) is applied to the control gate, while both drain and source are gdrounded. The drain voltage for erase is 16V. It is shown that charge retention characteristics is not limited by leakage in the oxide and program/erase endurance is over 10E4 cycles of program erase operation.