• Journal of Pharmaceutical Investigation
• /
• 제38권1호
• /
• pp.39-43
• /
• 2008

Cyclosporin A (CyA), a potent immunosuppressive drug used in allogeneic transplants and autoimmune disease, is a typical water-insoluble drug. Recently, nanoparticle carriers were investigated to improve the intestinal absorption of drugs. In this study, CyA-loaded nanostructured lipid carriers (NLCs) were prepared from a hot o/w emulsion using the high pressure homogenization method. The NLCs were consisted of cationic lipids, solid lipids, liquid lipids (oils), surfactant and stabilizer. Encapsulation efficiency of CyA in NLCs was approximately 71%. The average particle size and zeta potential of NLCs were below 250 nm and above +40 mV, respectively. The morphology of NLCs was confirmed by transmission electron microscopy (TEM) analysis. Compared to the CyA powder, higher in vitro release of CyA from NLCs was observed after burst release within 30 min. Thus, CyA-loaded NLCs could be applied not only for parenteral route but also for gastrointestinal administration, which needs further investigation.

• 폴리머
• /
• 제35권2호
• /
• pp.113-118
• /
• 2011

고체분산체는 난용성약물의 용해도를 향상시키는 기술로 용출특성을 고분자의 성질, 고분자의 함량 및 물리화학적 성질에 의하여 변화한다. 본 연구에서는 이부프로펜과 셀룰로오스 아세테이트를 사용하여 분무건조와 로터리 증발법을 사용하여 고체분산체를 제조하였다. 제조한 고체분산체의 표면성질을 주사전자현미경(SEM)을 사용하여 분석하였으며, X선 회절기(X-RD)와 사치주사열량계(DSC)를 사용하여 결정성 변화를 관찰하였다. 고체분산체의 화학적 변화를 관찰하기 위하여 적외선 분광기(FTIR) 분석을 하였으며, 수분 친화도를 측정하기 위하여 수분접촉각 측정을 하였다. 용출 특성은 인공정액(pH 6.8) 및 인공위액 (pH 1.2)에서 관찰하였다. 실험결과 약물의 결정성은 고분자의 비율이 증가하면 결정성이 감소하였으며, 화학적 변화는 없었다. 수분 친화도는 고분자비율과 비례하였으며, 분무건조로 제조된 고체분산체의 경우가 조금 높은 수분 친화도를 가졌다. 용출실험 결과 인공위액에서는 고분자의 비율이 높아질수록 용출률이 증가하였으며, 인공장액에서의 용출속도는 고분자의 비율과 반비례하는 것을 볼 수 있었다.

• 한국환경독성학회:학술대회논문집
• /
• 한국환경독성학회 2003년도 추계국제학술대회
• /
• pp.175-175
• /
• 2003

Phthalocyanine, a water soluble porphyrin derivative and dye, is known to inhibit the mutagenic and carcinogenic actions of compounds having polycyclic structures, e.g. heterocyclic amines. There is evidence that this adsorbent effect shows by a complex formation between the porphyrin-like structure of phthalocyanine and the planar molecular surfaces of theses compounds. That phthalocyanine can form an insoluble material when mixed with chitosan, a polyglucosamine, and that the solid chitosan-phthalocyanine, named Eco-Blue, thus prepared can efficiently adsorb polycyclic mutagenic compounds. The adsorption was experimented by UV/VIS spectrometry. The adsorbent effects of mutagens and carcinogens was identified by Gas chromatography (GC) and Ames Test. The adsorbed polycyclic mutagens were elutable with buffer, but only to small extents. Chitosan-phthalocyanine may be expected to be useful as an adsorbent against polycyclic mutagens and carcinogens.

• Journal of Ginseng Research
• /
• 제4권1호
• /
• pp.88-95
• /
• 1980

Red ginseng was extracted with water and analyzed for yield, saponin, pectin and other chemical composition. It was found that: (1) The total solid content in extract after 6 times of extraction was 46.8%,: including 13.6% of centrifugal residue; (2) 83.7% of total extractable solids and 86% total saponin was extracted after the initial three runs of extraction. (3) No significant changes were observed in HPLC pattern of extracted saponins over a range of extractions; (4) The ratio of centrifugal residue to total solids increased as the number of extractions increased; (5) The ratios of fat, protein, reducing sugar and pectin contents decreased with repeating extraction while those of crude fiber, total sugar and 35% alcohol insoluble residue increased when they were compared with total solids.

• 한국응용약물학회:학술대회논문집
• /
• 한국응용약물학회 1997년도 춘계학술대회
• /
• pp.116-116
• /
• 1997

Complex formation of practically insoluble dexamethasone dipropionate (DDP) with ${\beta}$-cyclodextrin (${\beta}$-CD), dimethyl-${\beta}$-cyclodextrin (DMCD), trimethyl-${\beta}$-cyclodextrin (TMCD), 2-hydroxypropyl-${\beta}$-cyclodextrin (HPCD) and sulfobutyl ether ${\beta}$-cyclodextrin (SBCD) in water was investigated by solubility method at various temperatures. Water solubility of DDP was found to be 1.78 $\mu\textrm{g}$/$m\ell$ at 37$^{\circ}C$. Propylene glycol (PG)-water cosolvent increased the solubility of DDP, but the solubilization was not sufficient (8.93 $\mu\textrm{g}$/$m\ell$ in 20% PG). The addition of CD markedly increased the solubility of DDP in water, and A$\sub$L/ type phase solubility diagrams were obtained with ${\beta}$-CD, TMCD, HPCD and SBCD, where the apparent stability constants of the soluble complexes at 25$^{\circ}C$ were determined to be 1388, 216, 1054, and 1992 M$\^$-1/, respectively. However, DMCD remarkably increased the solubility of DDP, and showed an A$\sub$P/ type diagram, suggesting that DMCD forms a soluble complex of high order with DDP. The stability constant for the DDP-DMCD complex at 25$^{\circ}C$ was determined to be 19132 M$\^$-1/. The thermodynamic parameters were calculated for the inclusion complex formation in aqueous solution. CD (1${\times}$10$\^$-2/M) remarkably decreased the partition coefficients of DDP between isopropyl myristate/water in the order of TMCD < ${\beta}$-CD < HPCD < SBCD < DMCD, and in squalane/water system in the order of HPCD < TMCD < ${\beta}$-CD < DMCD < DMCD $\leq$ SBCD. This finding represents that, in a o/w type cream, cyclodextrin complexation with DDP may result in high concentration of DDP in aqueous phase. The permeation of DDP through a cellophane membrane was highly suppressed by the addition of CD, and the degree of suppression was different among CDs, indicating that CD may control the skin permeation of DDP. The dissolution rates of solid dispersions with CDs were much faster than those of drugs alone and corresponding physical mixtures. All DDP-CD solid dispersions exceeded the equilibrium solubility. Consequently these results suggest that complex formation of DDP with CDs may provide useful means to markedly enhance the solubility, and CDs are useful in the semi-solid preparations such as creams and gels for topical application.

• 자원리싸이클링
• /
• 제8권1호
• /
• pp.18-22
• /
• 1999

본 연구에서는 산업폐기물 소각비산재를 2차자원으로 이용하기 위하여 침출법으로 금속의 존재와 그 양을 확인하여 분리·회수에 대한 기초자료를 제시하였다. 소각 비산재의 침출액에서는 다량의 Cu, Pb, Zn과 다양한 유해 중금속이 미량 함유되어 있었으며, 이들 소각재에 함유된 성분의 농도는 소각로에 도입되는 폐기물의 종류에 따라 차이가 있음을 알 수 있었다. 침출제로서 물, 황산, 탄산암모늄의 수산화나트륨을 이용하여 여러단계의 침출조작을 시도하여 하였다. 물 침출에 의하여 구리를, 수산화나트륨의 침출액에 의하여 아연과 납을 분리하고, 3차 침출제인 탄산암모늄의 침출액에 의하여 물에 미용해된 구리를 착이온 형태로 선택적으로 침출할 수 있었다. 각 단계별에 의한 무게 감량율은 물, 황산, 탄산암모늄에 의한 각 단계의 침출에 의하여 77%의 감량을 확인하였으며, 그 외의 각 방법에서는 60%이상의 무게 감량을 나타내었다.

• 산업식품공학
• /
• 제14권2호
• /
• pp.118-126
• /
• 2010

The fibrous material fraction as a by-product from the commercial aloe vera gel processing was obtained and freeze dried. The physicochemical characteristics such as the proximate composition, crystalline/surface structures and several physical functionalities including the water holding capacity (WHC), swelling capacity (SW), oil holding capacity (OHC), emulsion/foam properties and viscosity properties of this powdered sample (100 mesh) were investigated and analyzed by comparison with commercial $\alpha$-cellulose as a reference sample. The total dietary fiber content of powdered sample was very high as much as 87.5%, and the insoluble dietary and soluble dietary fiber content ratios were 77.6 and 22.4%, respectively. The FT-IR spectrum of powdered sample showed a typical polysaccharide property and exhibited a x-ray diffraction pattern for cellulose III and IV like structure. SW (8.24${\pm}$0.15 mL/g), WHC(6.40${\pm}$0.19 g water/g solid) and OHC(10.32${\pm}$0.29 g oil/g solid) of freeze dried aloe cellulose were about 3.3, 1.4 and 2 times higher than those of commercial $\alpha$-cellulose, respectively. Aloe cellulose (~2%, w/v) alone had no foam capacity while improved the foam stability of protein solution (1% albumin+0.5% $CaCl_{2}$) by factor of 300%. Emulsion capacity of 2%(w/v) aloe cellulose was about 70% level of 0.5%(w/v) xanthan gum, but its emulsion stability was about 1.2 times higher than that of xanthan gum. Also, aloe cellulose containing CMC (carboxyl methyl cellulose) of 0.3%(w/v) showed a very good dispersity. Aloe cellulose dispersion of above 1%(w/v) exhibited higher pseudoplasticity and concentration dependence than those of $\alpha$-cellulose dispersion, indicating the viscosity properties for new potential usage such as an excellent thickening agent.

• 광물과산업
• /
• 제26권
• /
• pp.1-12
• /
• 2013

In this study, an accelerated carbonation process was applied to stabilize hazardous heavy metals of industrial solid waste incineration (ISWI) bottom ash and fly ash, and to reduce $CO_2$ emissions. The most commonly used method to stabilize heavy metals is accelerated carbonation using a high water-to-solid ratio including oxidation and carbonation reactions as well as neutralization of the pH, dissolution, and precipitation and sorption. This process has been recognized as having a significant effect on the leaching of heavy metals in alkaline materials such as ISWI ash. The accelerated carbonation process with $CO_2$ absorption was investigated to confirm the leaching behavior of heavy metals contained in ISWI ash including fly and bottom ash. Only the temperature of the chamber at atmospheric pressure was varied and the $CO_2$ concentration was kept constant at 99% while the water-to-solid ratio (L/S) was set at 0.3 and $3.0dm^3/kg$. In the result, the concentration of leached heavy metals and pH value decreased with increasing carbonation reaction time whereas the bottom ash showed no effect. The mechanism of heavy metal-stabilization is supported by two findings during the carbonation reaction. First, the carbonation reaction is sufficient to decrease the pH and to form an insoluble heavy metal-material that contributes to a reduction of the leaching. Second, the adsorbent compound in the bottom ash controls the leaching of heavy metals; the calcite formed by the carbonation reaction has high affinity of heavy metals. In addition, approximately 5 kg/ton and 27 kg/ton $CO_2$ were sequestrated in ISWI bottom ash and fly ash after the carbonation reaction, respectively.

• 폴리머
• /
• 제38권4호
• /
• pp.434-440
• /
• 2014

셀레콕시브는 높은 결정성을 갖는 난용성 약물로서 이러한 난용성 약물의 용해도를 증진시키기 위해 고체분산법을 바탕으로 한 분무건조기를 이용하여 고체분산체를 제조하였다. PVP K30과 Eudragit EPO를 수용성 담체로 사용하였고 폴록사머 407은 계면활성제로 사용하였다. 제조된 셀레콕시브 고체분산체의 특성을 SEM, DSC, XRD 그리고 FTIR을 이용하여 확인하였다. SEM과 DSC 그리고 XRD를 통하여 셀레콕시브 고체분산체가 무정형임을 알 수 있었다. 제조된 고체분산체는 pH 1.2에서 용출을 실시하였으며 시판제인 Celebres$^{(R)}$ 용출률을 비교하였으며 분무건조를 통해 제조한 고체분산체가 Celebres$^{(R)}$보다 용출률이 크다는 것을 확인하였다.

• 폴리머
• /
• 제33권6호
• /
• pp.596-601
• /
• 2009

아세클로페낙은 높은 결정성을 갖는 난용성 약물이다. 이러한 난용성 약물의 용해도를 증진시키기 위해서 고체분산법을 바탕으로 한 분무건조기를 이용하여 미립구를 제조하였다. PVP-K30을 수용성 담체로 사용하였고 폴록사머는 계면활성화제로 사용하였다. 제조된 아세클로페낙 고체분산체의 특성을 SEM, DSC, XRD 그리고 FT-IR을 이용하여 확인하였다. SEM, DSC, XRD을 통하여 아세클로페낙 고체분산체가 무정형임을 알 수 있었고 FT-IR을 통하여 아세클로페낙과 PVP-K30간에 수소결합을 통해 염을 형성하고 있다는 것을 확인할 수 있었다. 제조된 미립구는 pH 6.8에서 방출을 실시하였으며 시판제인 $Airtal^{(R)}$과 용출률을 비교하였으며 분무건조를 통해 제조한 미립구가 시판제인 $Airtal^{(R)}$ 보다 용출률이 크다는 것을 확인하였다.