• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.838-841
• /
• 2004

This paper presents the experimental results on the penetration of chloride. ions to ordinary portland cement concrete which is subjected to 2 different artificial environments; consecutive digestion, wetting at $3\%$ NaCl for 1 day and then drying at $40^{\circ}C$ oven for 4 days. The water-cement ratio was $35\%,\;45\%,\;55\%$. Test results showed that the intrusion depth and concentration of chloride ions penetrated into concrete in repeated wetting-drying environments were respectively deeper and higher than those of consecutive digestion environment. The penetration of chloride ions deeply depend on the effect of water to cement ratio.

• Advances in environmental research
• /
• 제5권2호
• /
• pp.95-108
• /
• 2016

Urban geology is the study of urban geologic environments to provide a scientific basis for rational land use planning and urban development and provides information on geologic environments as a basis for city planners. Based on AEG recommendations, urban geological studies covered the urbanism and historical backgrounds, geological setting, engineering geological constraints and environmental assessments of understudied cities. The aim of this study is to provide a good view of urban geology of Tabriz city the capital of East Azerbaijan province in Iran. The topics of discussions about Tabriz city urban geology are included geologic (geomorphology, geology, climatology and hydrogeology), engineering geological (earthquake, landslide and geotechnical hazards investigations) and environmental characteristics (air, soil and water hazards assessment).The results of the urban geologic studies indicated that Tabriz city in terms of engineering geological and environmental constraints is at high risk potential and in terms of seismic activity and landslide instability is highly potential. In terms of air, soil and water pollution there are many important environmental concern in this city.

• Corrosion Science and Technology
• /
• 제5권6호
• /
• pp.206-212
• /
• 2006

The effects of sub-ppm levels of $H_2S$ and the adsorbed water on the atmospheric corrosion of silver were studied with In situ weight balance to study the effect of the adsorbed water on the kinetic behavior and to determine the rate-controlling step, with XPS to analyze the tarnish film, and with calculation of phase equilibrium to predict the stable solid phase, the concentrations of dissolved species ($Ag^-$, $H^+$, $S^{2-}$, $HS^-$) and the equilibrium potentials ($E_{Ag^+/Ag}$, $E_{H^+/H_2}$, $E_{O_2/O^{2-}$). The results of weight measurements showed that oxygen was required for the sulfidation of silver in 100 ppb $H_2S$ and humidified environments enhanced the tarnished rate and oxidizing power. In addition, the rate determining step for tarnishing silver was shown to be changed to transport though the tarnish film.

• 한국생활과학회지
• /
• 제4권1호
• /
• pp.123-133
• /
• 1995

Lately our environments have been destroyed by such new things as synthetic detergent. How to use detergent at home can be a decisive factor for decreasing water pollution because living sewage by using detergent at home is the main cause of water pollution. We consumers, therefore, should understand the relation between the chemical ingredients of detergent and water pollution and should choose detergent always taking the kinds of detergent, its washing pewer into consideration. We should also contribute to the protection of out environment by keeping the standard of using amount attached to the products.

• 한국미생물학회:학술대회논문집
• /
• 한국미생물학회 2007년도 International Meeting of the Microbiological Society of Korea
• /
• pp.62-64
• /
• 2007

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2019년도 춘계학술논문요약집
• /
• pp.325-326
• /
• 2019

• KIEAE Journal
• /
• 제10권6호
• /
• pp.67-72
• /
• 2010

This study was conducted to examine the change of heating environment with the creation of an indoor water space. Living environments and comfort of dwellers can be improved by utilizing the physical properties of water effectively. This study focuses on the basic examination of the effect of water space and the environmental effects of water space by experiment. Two identical models were fabricated to compare the changes in indoor temperature and humidity with and without a water space. With the water space, temperature was reduced by an average of $0.55^{\circ}C$ a day and moisture content increased by an average of 4%. As a result, it was possible to obtain quantitative data on water space's temperature reduction and humidity control capacities. This study is expected to provide basic information for further studies on the effect of water spaces in various buildings.

• 한국군사과학기술학회지
• /
• 제24권5호
• /
• pp.482-491
• /
• 2021

It is obvious that understanding the effects of shallow water environment of Korea is very important to guarantee the optimal performance of active sonar such as monostatic and bistatic sonar. For this reason, in this paper, we analyzed the detection performance characteristics for various depth deployments of sonar in summer, winter and water temperature inversion environments, which environments are frequently observed in shallow water of Korea such as the Yellow sea. To analyze only effects of water temperature structures on target detection performance, we applied range independent conditions for bottom, sea surface and water temperature characteristics. To understand the characteristics of detection performance, we conducted transmission loss and signal excess modeling. From the results, we were able to confirm the characteristics of detection performance of active sonar. In addition, we verified that operation depth of transmitter and receiver affects the detection performance. Especially in the water temperature inversion environment, it was confirmed that the shadow zone could be minimized and the detection range could be increased through bistatic operation.

• 한국추진공학회지
• /
• 제17권2호
• /
• pp.31-38
• /
• 2013

본 연구에서는 열습환경에 노출된 탄소섬유/에폭시 복합재의 핀 체결부에 대해 핀 하중시험을 수행하고 수집된 음향방출신호를 분석하여 열습환경이 복합재 핀 체결부의 파괴거동에 미치는 영향을 조사하였다. 이때 시편은 환경조건에 노출되기 전의 시편(Base), 상온침수환경에 노출된 시편(RT), 고온침수 환경에 노출된 시편(HT)으로 구분하였다. 연구결과에 의하면 RT 시편과 HT 시편의 베어링 강도는 Base 시편에 비해 각각 2.2%와 13% 감소하였다. 음향방출신호의 경우 시편 종류에 따라 파손이 가속화되는 시점이 달라짐을 나타내었으며 RT 시편과 HT 시편은 Base 시편에 비해 모재균열에 의한 이벤트가 감소하는 경향이 나타났다. 이로 미루어 판단하면 열습환경은 복합재 핀 체결부의 음향방출신호뿐 아니라 계면특성의 저하도 초래함을 알 수 있었다.

• Environmental Engineering Research
• /
• 제21권4호
• /
• pp.319-332
• /
• 2016

Micropollutants are often discharged to surface waters through untreated wastewater from sewage treatment plants and wastewater treatment plants. The presence of micropollutants in surface waters is a serious concern because surface water is usually provided to water treatment plants (WTP) to produce drinking water. Many micropollutants can withstand conventional WTP systems and stay in tap water. In particular, pharmaceuticals and endocrine disruptors are examples of micropollutants that are detected at the drinking water, ppb, or even ppb level. A variety of techniques and processes, especially advanced oxidation processes, have been applied to remove micropollutants from water to control drinking water contamination. This paper reviews recent researches on the occurrence and removal of micropollutants in the aquatic environments and during water treatment processes.