• 제목/요약/키워드: water diffusion coefficient

검색결과 274건 처리시간 0.03초

LMC(Latex Modified Concrete)의 염소이온 확산 특성 (Evaluation of Diffusion Property of Latex Modified Concrete)

  • 박성기;원종필;박찬기
    • 한국농공학회논문집
    • /
    • 제50권4호
    • /
    • pp.27-37
    • /
    • 2008
  • It is most serious problem which is various occurs from the agricultural concrete structure and off shore concrete structure the problem which it comes to think is deterioration of the concrete which is caused with the corrosion of the reinforcing steel which is caused by with permeation of the water and the sea water. Specially the off shore concrete structure has been deteriorated by the steel reinforcement corrosion. The latex modified concrete(LMC) was adds latex in the plain concrete as the latex has increase the durability of concrete. This study were accomplished to the estimate the diffusion coefficient of LMC, and the time dependent constants of diffusion. The average chloride diffusion coefficient was estimated. Also, the average chloride diffusion coefficient was compared with diffusion coefficient test results of 28 curing days. The test results indicated that the average chloride diffusion coefficient could closely estimate the test results of the diffusion coefficient test results of 28 curing days.

폐석분을 활용한 경량골재 콘크리트의 염화물 확산에 관한 연구 (A Study on Chloride Diffusion in Concrete Containing Lightweight Aggregate Using Crushed Stone-powder)

  • 이대혁;지남용;김재훈;정용;신재경
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2009년도 추계 학술논문 발표대회
    • /
    • pp.127-131
    • /
    • 2009
  • The purpose of this study is to provide fundamental data on chloride diffusion from lightweight aggregate concrete by utilizing crushed stone-powder. Accordingly, the study performed experiments using concrete aggregates of Crushed Aggregate (CG), Single-sized Lightweight Aggregate (SLG), Continuous Graded Lightweight Aggregate (CLG), and using water-binder ratio of 0.4, 0.5, 0.6, and using binder of FA and BFS. The chloride diffusion coefficient is calculated after experiment based on NT BUILD 492. Diffusion coefficient of SLG and CLG were little bit higher than CG Concrete, but the difference is meaningless. Also, chloride diffusion coefficient indicates that it is highly affected by water-binder ratio, and it decreases with the decrease in water-binder ratio. The admixture substitution indicates decrease only with water-binder ratio of 0.4 for FA15% case, but admixture substitution indicates decrease with all levels of ratio for FA10 + BFS20% which means more appropriate. According to the analysis result of chloride diffusion from lightweight aggregate concrete, crushed stone-powder utilized lightweight aggregate concrete indicates higher chloride diffusion coefficient than CG concrete, which is not a significant difference, and can improve resistance through water-binder ratio and admixture substitution.

  • PDF

콘크리트 내 이산화탄소 확산계수 예측에 관한 연구 (Diffusivity of Carbon Dioxide in Concrete)

  • 오병환;정상화;이명규
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2003년도 봄 학술발표회 논문집
    • /
    • pp.669-674
    • /
    • 2003
  • The purpose of this study is to identify the diffusion coefficients of carbon dioxide for various concrete mixtures. The test results indicate that the diffusion coefficient increases with the increase of water-cement ratio. The diffusion coefficient decreases with the increase of relative humidity at the same water-cement ratio. The diffusion of carbon dioxide reached the steady-state within about five hours after exposure. It was found that the diffusion coefficient of cement paste is larger then that of concrete or mortar. The quantitative values of diffusivity of carbon dioxide in this study will allow more realistic assessment of carbonation depth in concrete structures.

  • PDF

Modeling of ion diffusion coefficient in saturated concrete

  • Zuo, Xiao-Bao;Sun, Wei;Yu, Cheng;Wan, Xu-Rong
    • Computers and Concrete
    • /
    • 제7권5호
    • /
    • pp.421-435
    • /
    • 2010
  • This paper utilizes the modified Davis model and the mode coupling theory, as parts of the electrolyte solution theory, to investigate the diffusivity of the ion in concrete. Firstly, a computational model of the ion diffusion coefficient, which is associated with ion species, pore solution concentration, concrete mix parameters including water-cement ratio and cement volume fraction, and microstructure parameters such as the porosity and tortuosity, is proposed in the saturated concrete. Secondly, the experiments, on which the chloride diffusion coefficient is measured by the rapid chloride penetration test, have been carried out to investigate the validity of the proposed model. The results indicate that the chloride diffusion coefficient obtained by the proposed model is in agreement with the experimental result. Finally, numerical simulation has been completed to investigate the effects of the porosity, tortuosity, water-cement ratio, cement volume fraction and ion concentration in the pore solution on the ion diffusion coefficients. The results show that the ion diffusion coefficient in concrete increases with the porosity, water-cement ratio and cement volume fraction, while we see a decrease with the increasing of tortuosity. Meanwhile, the ion concentration produces more obvious effects on the diffusivity itself, but has almost no effects on the other ions.

용제염색에 관한 기초적 연구 제2보 물, TCE 및 물/TCE 처리를 한 PET의 염색성 (A Foundamental Study on the Solvent Dyeing Part 2. Dyeing Properties of PET Treated with Water, TCE and water/TCE Emulsion)

  • 정두진
    • 한국의류학회지
    • /
    • 제3권2호
    • /
    • pp.37-41
    • /
    • 1979
  • In order to obtain tasic information for solvent dyeing, polyethylene terephthalate (PET) films was pretreated with water, tetrachloroethylene (TCE) and water/TCE emulsion for three hours at $140^{\circ}C$ for stabilizing the substrate. By film roll cyliderical method, Disperse Red 60, Disperse Yellow 42, and Disperse Blue 27 were diffused in the films and examined dyeing properties. The results are summarized as follows; 1) Diffusion coefficient increases in the order, waterTCE>water/TCE 2) A linear relationship between diffusion coefficient and shrinkage was Observed 3) The temperature dependence of the diffusion coefficient can't be expressed by WLF equation.

  • PDF

고분자전해질 연료전지에서 고분자막을 통한 물의 이동 (Transport of Water through Polymer Membrane in Proton Exchange Membrane Fuel Cells)

  • 이대웅;황병찬;임대현;정회범;유승을;구영모;박권필
    • Korean Chemical Engineering Research
    • /
    • 제57권3호
    • /
    • pp.338-343
    • /
    • 2019
  • 고분자전해질 연료전지에서 전해질막의 물이동과 함수율은 고분자막의 성능에 많은 영향을 미친다. 본 연구에서는 간단한 방법에 의해 물이동에 관한 고분자막의 물성(전기삼투계수, 물 확산계수)을 측정하고 이들을 이용해 막을 통한 물의 이동량과 이온전도도를 모델식에 의해 모사한 후 실험값과 비교하였다. 물이동의 구동력은 전기삼투와 확산만이 라고 본 1차원 정상상태 지배방정식을 매트랩으로 수치해석하였다. $144{\mu}m$ 두께의 고분자막의 전기삼투계수를 수소펌핑셀에서 구한 결과 1.11을 얻었다. 물확산계수를 상대습도의 함수로 나타냈고 물확산에 대한 활성화에너지는 $2,889kJ/mol{\cdot}K$였다. 이들 계수를 적용해 모사한 물이동량과 이온전도도 결과는 실험값과 잘 일치함을 보였다.

건조과정에 있어서 폴리머 시멘트 모르터의 수분확산에 관한 연구 (A Study on te Water Diffusion of Polymer-Modified Mortars in Drying Process)

  • 조영국;소양섭
    • 콘크리트학회지
    • /
    • 제8권5호
    • /
    • pp.135-143
    • /
    • 1996
  • 콘크리트 및 모르터중의 수분의 확산 거동은 탄성계수, 크리프, 건축수축 등의 역학적 성질에 큰 영향을 미친다. 일반적으로 건조과정에서 폴리머 시멘트 콘크리트와 모르터의 수분의 증발에 의한 중량감소는 내부의 폴리머 필름형성에 의한 보수효과로 보통 시멘트 콘크리트 및 모르터에 비해 월등히 적다. 본 연구는 폴리머 시멘트 모르터 내부의 수분의 확산 과정을 확인하기 위하여 3종류의 폴리머디스퍼션과 에폭시 수지를 사용한 폴리머 시멘트 모르터를 제조하여 건조조건에 따른 수분의 확산 정도를 확산계수로 평가하였다. 실험결과, 폴리머 시멘트 모르터의 수분확산은 보통 시멘트 모르터에 비하여 아주 적었으며 폴리머 시멘트비에 따라 감소하였다.

Experimental Study on CO2 Diffusivity in Cementitious Materials

  • Jung, Sang-Hwa;Lee, Myung-Kue;Kim, Jee-Sang
    • Corrosion Science and Technology
    • /
    • 제4권2호
    • /
    • pp.69-74
    • /
    • 2005
  • The carbonation of concrete is one of the major factors that cause durability problems in concrete structures. The rate of carbonation depends largely upon the diffusivity of carbon dioxide in concrete. The purpose of this study is to identify the diffusion coefficients of carbon dioxide for various concrete mixtures. To this end, several series of tests have been planned and conducted. The test results indicate that the diffusion coefficient increases with the increase of water-cement ratio. The diffusion coefficient decreases with the increase of relative humidity at the same water-cement ratio. The diffusion of carbon dioxide reached the steady state within about five hours after exposure. The content of aggregates also influences the diffusivity of carbon dioxide in concrete. It was found that the diffusion coefficient of cement paste is larger then that of concrete or mortar. The quantitative values of diffusivity of carbon dioxide in this study will allow more realistic assessment of carbonation depth in concrete structures.

Evaluation of Diffusibility of Boron in Wood under Water Leaching Conditions

  • Ra, Jong-Bum;Kim, Gyu-Hyeok
    • Journal of the Korean Wood Science and Technology
    • /
    • 제34권5호
    • /
    • pp.98-103
    • /
    • 2006
  • Radial and tangential diffusion coefficients of boron in wood under water leaching conditions were determined from the change of concentration profiles of boron. Egner's solution was used to obtain variable diffusion coefficients of boron because it has been known to be the only method to determine variable diffusion coefficients with no cumbersome assumption. The values of diffusion coefficients were between $0.18{\times}10^{-6}m^2/sec$ and $25.6{\times}10^{-6}cm^2/sec$. They increased with the increase of sample thicknesses, and decreased with the increase of leaching times. There was a region where Egner's method was not valid. However, Egner's solution illustrates a convenient way to evaluate diffusion characteristics of boron from wood under water leaching conditions. The diffusion coefficients at wood surface may be regarded as leaching coefficients.

수분확산에 의한 폴리머 시멘트 모르터의 건조수축과 확산계수에 관한 연구 (A Study on the Dry Shrinkage and Moisture Diffusion Coefficient of Polymer-Modified Mortars by the Moisture Diffusion)

  • 조영국;소양섭
    • 콘크리트학회지
    • /
    • 제8권5호
    • /
    • pp.145-154
    • /
    • 1996
  • 폴리머 시멘트 모르터는 보수성 및 방수성이 우수한 재료로서 모르터 내부의 수분의 확산거동 대한 연구는 중요하다. 본 연구에서는건조조건을 달리한 폴리머 시멘트 모르터의 수분확산에 영향을 미치는 상대습도와 내부함수율의 변화에 따른 수분의 확산계수와 건조수축과의 관계에 대해 고찰하였으며, 수분확산에 영향을 미치는 내부의 세공조직의 분포를 측정하였다. 본 실험결과, 폴리머 시멘트 모르터의 수분확산에 영향을 미치는 요인과 결과는 상호 상관관계를 나타내며, 건조수축과 수분확산계수는 보통 시멘트 모르터에 비해 아주 적었으며 상대습도, 폴리머 시멘트비 및 세공의 분포에 영향을 받는다.