• 한국농공학회지
• /
• 제19권1호
• /
• pp.4312-4322
• /
• 1977

In order to investigate the effect of the water content and the accelerated curing on the strength of the soil-cement mixtures, laboratory test of soil cement mixtures was performed at five levels of water content, four levels of accelerated curing temperatures, three levels of normal curing periods, and six levels of accelerated curing time. Also this study was carried out to investigate the effect of grain size distribution of 21 types of soils on the strength of soil-cement mixtures at four levels of cement content and three levels of curing time. The results are summarized as follows: 1. Optimum moisture content increased with increase of the cement content, but maximum dry density was changed ununiformly with cement content. Water content corresponding to the maximum strength was a little higher than the optimum moisture content along the increase of cement content. 2. In molding the specimens with the optimum moisture content, the maximum strength appeared at the wet side of the optimum moisture content. 3. According to increase of curing temperature as 30, 40, 50, and 60$^{\circ}C$, unconiiend compressive strength of soil-cement mixtures increased, the rate of increase at the early curing period was large, and approximately 120 hours was suifficient to harden soil-cement mixtures completely. 4. The strength of soil-cement mixtures at the curing temperature of 10$^{\circ}C$ decreased at the rate of 30 to 50 percent than at the curing temperature of 20$^{\circ}C$, and the strength of soil-cement mixtures at the curing temperature of 0$^{\circ}C$ increased a little with increase of curing time. 5. Although the strength of soil-cement mixtures seemed to be a little affected by the temperature difference between day time and night, it was recommended that reasonable working period was the duration from July to August of which average maximum temperature of Korea was approximately 30$^{\circ}C$. 6. Accelerated curing time corresponding to the normal curing time of 28-day was shorten with increase of curing temperature, also it was a little affected by the cement. Accelerated curing time that the strength of soil-cement mixtures for the cement of 9 percent and the curing temperature of 60was shorten with increase of curing temperature, also it was a little affected by the cement. Accelerated curing time that the strength of soil-cement mix- tures for the cement of 9 percent and the curing temperature of 60$^{\circ}C$ was 45 hours at the KY sample, 50 hours at the MH, 40 hours at the SS, and 34 hours at the JJ respectively. 7. Accelerated curing time was depended upon the grain size distribution of soil, it decreased with increase the percent passing of No. 200 sieve. 8. Relationship between the normal curing times and the accelerated curing times showed that there was a linear relationship between them, its slope decreased with increase of curing temperature. 9. The most reasonable soil of the soil-cement mixtures was the sandy loam which was a well graded soil. Assuming the base of road requiring 7-day strength of 21 kg/$\textrm{cm}^2$ being used, the soil-cement mixtures could be obtained with adding 6 percent of cement in such a sails S-7, S-8, S-9, S-10, S-11, S-12, S-13. 10. The regression equation between the 28-day and the 7-day strength was obtained as follow; q28=1.12q7,+6.5(r=0.96).

• 한국건축시공학회지
• /
• 제17권2호
• /
• pp.175-181
• /
• 2017

본 연구는 초고강도 섬유보강 콘크리트의 인장강도 특성을 파악하기 위한 일환의 연구로서 직접인장시험에 의한 노치가 도입된 시험체의 인장성능을 파악하기 위하여 시험변수는 목표 설계기준강도 120, 150 및 180MPa를 대상으로 하였으며, 양생조건을 일반 수중양생과 $90^{\circ}C$ 고온증기 양생조건으로 하여 그 특성을 검토하였다. 전반적으로 노치타입의 직접인장강도 시험체는 기존 직접인장 시험체에 비해 중앙균열 유도가 효과적인 것으로 나타났으며 데이터를 직접 인장강도-변형률 그래프로 나타낸 결과 먼저 재령 측면에서는 28일에서 56일로 진행할 때의 강도 상승이 가장 높은 것으로 측정 되었으며, 양생조건 측면에서는 고온증기 양생의 경우 수중양생의 비해 초기 강도가 높으나 장기 재령에 가까워질수록 두 가지 양생조건의 직접인장강도 차이가 미비해지는 것을 알 수 있었다. 최대인장강도는 수중양생의 경우 모든 목표설계강도가 재령이 증가할수록 일정하게 증가하는 것으로 나타났으며, 증기양생의 경우 재령 7일에서 초기강도 발현 효과로 인해 상당히 증가하는 경향을 나타내었다. 초기균열 강도는 수중양생의 경우 재령경과에 따라 증가하며, 증기양생의 경우 7일에서 수중양생에 비해 높은 것으로 나타난 반면에 28일 강도는 저하하는 경향을 나타내었다. 이부분에 대해서는 강섬유의 배열상태 등의 검토가 필요할 것으로 사료된다.

• 대한치과기공학회지
• /
• 제14권1호
• /
• pp.91-94
• /
• 1992

This study was made to change dimension of self-curing resin by various curing technics. Specimens were fabricated 45 by 7 curing method. Six measurements(distances AB,BC,CD, AD, AC, and BD) were made of mold section and recorded with micrometer(1/20 mm). The results of the experiment were as follows : 1. The air pressure cured specimens exhibited more distoration than the bench-cured, watercured, and monomer atmosphere-cured specimens(P < 0.05). 2. The water pressure cured specimens exhibited more distoration sphere-cured specimens (P < 0.(15).

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 봄 학술발표회 논문집
• /
• pp.305-312
• /
• 2002

To estimate the effects of lime and cement on the surplus soil, the engineering properties of the marine deposited clay and the fresh water clay were analyzed. The specimen were prepared under several curing conditions, namely, underwater curing, wet condition curing and underwater curing after heating. Unconfined compression strength were estimated after 7, 14, 28 and 60 days, respectively. The strength were steeply increased with time until first 14 days. Specially the increase of the strength of the heated soil were large.

• 한국지반공학회논문집
• /
• 제28권6호
• /
• pp.71-79
• /
• 2012

해안지역의 연약지반을 개량하기 위한 지반개량공법으로 가장 많이 사용되었던 모래다짐말뚝공법이나 사석치환공법은 최근 거의 사용되지 않으며, 대신 시멘트로 연약점토를 강제 교반시켜 고형화시키는 DCM(Deep Cement Mixing)공법이 많이 사용되고 있다. DCM공법이 주로 적용되는 해안지역에는 점토 이외에 모래와 같은 사질토도 존재하므로 본 연구에서는 해수에 포함된 염분과 양생방법이 시멘트로 고결된 모래의 일축압축강도에 어떤 영향을 미치는 지 연구하였다. 다섯 종류의 시멘트비를 사용하여 다짐방법으로 공시체를 제작한 다음 3일 동안 양생시켜 일축압축시험을 실시하였다. 혼합수로 해수 또는 증류수를 사용한 다음 해상에서 이루어지는 DCM공법을 고려하여 공시체를 해수에 수침시켜 양생하였다. 또한 육상조건과 비교하기 위하여 증류수로 수중양생하거나 대기중 양생도 실시하였다. 혼합수로 해수를 사용한 다음 구속압이 없는 상태로 해수에서 수중양생할 경우 공시체에 여러 균열이 발생하여 고결력이 발현되지 않았다. 시멘트비와 양생방법이 동일한 경우, 혼합수와 양생수로 해수를 사용한 공시체의 일축압축강도는 해수를 사용하지 않은 공시체보다 최대 3.5배 정도 낮게 나타났다. 또한 공시체의 수중양생 시 사용한 양생수보다는 공시체 제작 시 사용한 혼합수에 염분이 포함될 경우 강도 저하에 더 큰 영향을 미쳤다. 시멘트비가 동일한 경우, 사용한 물에 관계없이 대기중 양생한 공시체의 강도가 수중양생한 공시체보다 평균 2배 정도 높게 나타났다.

• 한국염색가공학회지
• /
• 제13권3호
• /
• pp.188-196
• /
• 2001

1, 1-diamino-3, 3, 5, 5-tetrachlorocyclotriphosphazene, 1, 1-diami-no3, 3, 5, 5-tetra-(p-bromophenoxy)cyclotriphosphazene, and 1, 1-diamino-3, 3, 5, 5-tetra-(p-chlorophenoxy) cyclotri-phosphazene(ACPP) was prepared from hexachlorocyclotriphosphazene and used for the curing agent of bisphenol A type epoxy resin and phenol novolak. The resistance to chemicals and water of the cured epoxy resins were examined by DMTA and compared with those of the epoxy rosins cured with phosphazene derivatives and 4, 4'-diaminodiphenylmethane. The effect of the curing agent on resistance to chemicals and water of the cured epoxy resins were investigated. The epoxy resins cured with 1, 1-diamino-3, 3, 5, 5-tetrachlorocyclotriphosphazene and 1, 1- diamino-3, 3, 5, 5-tetra- (p-bromophenoxy)cyclotriphosphazene showed superior resistance to chemicals and water to those of 1, 1-diamino-3, 3, 5, 5-tetra- (p-chlorophenoxy)cyclotriphosphazene and 4, 4'-diaminodiphenylmethane. It is an effective curing agent for epoxy resins to enhance the resistance to chemicals, water and tome proofing.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회논문집(I)
• /
• pp.373-378
• /
• 2000

The objective of this study was to investigate the influence the influence of theoretical void ratio(T.V.R), grading of aggregate and curing method on the strength and water permeability of porous concrete, and the reduction proportion of water permeability by these factors. The results of the study showed that its strength and water permeability were greatly depended on the T.V.R and grading of aggregate, but didn't on the curing method. And, when the T.V.R and grading of aggregate were increased, the reduction proportion of water permeability was small. As the relation ship between its physical properties and non-destruction test values was very high, its use for the estimation of the physical properties will be useful.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 봄 학술발표회 논문집
• /
• pp.483-490
• /
• 2002

A massive amount of marine clay produced as dredging of coast and sea bed is often dumped in open sea and filled in pond. The treatment of marine clay demand a large area and make fatal environmental problems for echo system. This research work intend to manufacture a light-weight landfill materials which are produced by mixing the dredged marine clay with various amount cement and foam. An extensive Uniaxial and Triaxial compression test are carried out to investigate the strength characteristics of the light-weight cement mixed marine clay with foam under various test conditions. The results indicated that the required unit weight has been achieved with negligible change after 28days curing time in water. It is also recognized that the compressive strength of light-weight landfill materials linearly decrease with increasing initial water content, and the rate of strength decrease with increasing initial water content in water curing was smaller than that of air curing Futhermore, the rate of strength decreased with increasing initial water content, however, the rate become smaller as cement content increased.

• Advances in concrete construction
• /
• 제5권3호
• /
• pp.271-288
• /
• 2017

This paper aims to investigate the effects of replacing cement with ground granulated blast furnace slag (GGBFS) in self compacting concrete in the fresh and hardened state. The performance of SCC in moderate climate is well investigated but few studies are available on the effect of hot environment. In this paper, the effect of initial water-curing period and curing conditions on the performance of SCC is reported. Cement was substituted by GGBFS by weight at two different levels of substitution (15% and 25%). Concrete specimens were stored either in a standard environment (T=$20^{\circ}C$, RH=100%) or in the open air in North Africa during the summer period (T=35 to $40^{\circ}C$; R.H=50 to 60%) after an initial humid curing period of 0, 3, 7 or 28 days. Compressive strength at 28 and 90 days, capillary absorption, sorptivity, water permeability, porosity and chloride ion penetration were investigated. The results show that the viscosity and yield stress are decreased with increasing dosage of GGBFS. The importance of humid curing in hot climates in particular when GGBFS is used is also proved. The substitution of cement by GGBFS improves SCC durability at long term. The best performances were observed in concrete specimens with 25% GGBFS and for 28 days water curing.

• 대한토목학회논문집
• /
• 제39권4호
• /
• pp.485-492
• /
• 2019

본 연구는 순환 굵은 골재의 함수상태가 콘크리트의 압축강도에 미치는 영향을 물/결합재 비와 양생 조건을 변수로 하여 평가하였다. 표건상태의 순환골재는 콘크리트의 강도발현을 저하시켰는데, 이는 순환골재의 높은 흡수율에 의한 표면수의 증가로 골재와 시멘트 페이스트 사이의 부착강도가 저하되었기 때문이다. 골재의 종류와 함수상태가 물/결합재 비의 변화에 따라 압축강도에 미치는 영향의 정도는 비슷하였다. 그러나 양생조건에 대해서는 골재의 종류에 따라 상당한 차이를 보였다. 대기양생을 시킨 경우 높은 흡수율을 가진 순환골재는 수화작용에 필요한 수분을 감소시키고, 수분증발을 증가시켜 강도발현을 저해하였다. 순환골재의 함수상태는 콘크리트의 압축강도에 상당한 영향을 줬으며, 순환골재콘크리트 생산시 골재의 흡수율에 따른 함수상태에 대한 관리가 필요하다. 또한 순환골재 콘크리트의 경우 적절한 품질관리를 위해 양생관리가 매우 중요하다.