• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.4
• /
• pp.525-530
• /
• 1999

Prior to ensiling Rhodesgrass (RG) and Italian ryegrass (lRG) were treated with lactic acid bacteria (LAB) or with LAB+cellulases to compare their fermentation characteristics and chemical compositions. LAB (Lactobacillus casei) was added to all ensiling materials (except the untreated control) of RG and IRG at a concentration of $1.0{\times}10^5\;cfu.g^{-1}$ fresh forage. The enzymes used were Acremoniumcellulase (A), Meicelase (M) or a mixture of both (AM). Each enzyme was applied at levels of 0.005, 0.01 and 0.02 % of fresh forage. The silages with each treatment were incubated at 20, 30 and $40^{\circ}C$ and stored for about 2 months. While no marked differences were found between the RG and IRG silages with various treatments on dry matter (DM), volatile basic nitrogen (VBN) and water soluble carbohydrate (WSC) contents, there were significant differences in pH value, and lactic acid and butyric acid contents. LAB inoculation did not affect the fermentation characteristics of either the RG or IRG silages. The combined treatments of LAB+cellulases improved the fermentation quality of both the RG and IRG silages as evidenced by the decrease in pH value and increase in lactic acid content. Increasing the amount of added cellulase resulted in a decrease in pH value and an increase in lactic acid content in both the RG and IRG silages. Cellulases A and AM had a greater effect than cellulase M on the fermentation quality of the RG and IRG silages. Incubation temperatures of 30 and $40^{\circ}C$ appeared to be more appropriate environments for stimulating good fermentation than $20^{\circ}C$.

• Journal of Korean Society of Forest Science
• /
• v.96 no.5
• /
• pp.503-509
• /
• 2007

The major objective of this study was to analyze the difference of the chemical characteristics of acid deposition in Quercus forests in Korea and Japan. The pH values of rainfall at the experimental forest of Kangwon National University (KS site) were higher than those at the Foresta Hills in Japan (JP site), and all chemical contents of throughfall and stemflow were much higher than those of rainfall in Quercus forest stands at the KS and JP site. The pH values, $Ca^{2+}$, $NO_3{^-}$ and $SO{_4}^{2-}$ concentration of throughfall and stemflow at the KS site showed seasonal variation. While at the JP site, the same pattern was shown in the pH values of throughfall and stemflow, however, did not show any difference among seasons. Also, the annual input of all nutrients in these two contrasting forests varied seasonally. These results can be used to predict the amounts of air pollutant that are washed off and leached by the rainfall and Yellow Sand (Asian dust), including NOx and SOx acid pollutants transported easterly from China in the spring. Therefore, it is necessary to quantify the inputs of dry and wet deposition throughout a full year to gain a more complete understanding of the effects of acid deposition on the nutrient cycles in these forest ecosystems.

• Food Science of Animal Resources
• /
• v.22 no.2
• /
• pp.151-157
• /
• 2002

The Korean fresh pork loins in vacuum packaged were obtained from three different Korean export companies and investigated for their proximate composition and physico-chemical characteristics. The fresh pork loins were stored at 2$^{\circ}C$ for 50 days and analyzed with an interval of 5∼10 days. In proximate analyses, the moisture contents of pork loins from the company I were higher, the protein contents from the company II were higher, and fat contents from the companies II and III were higher compared to those from the other companies. The pH of loins increased as storage period increased. The shear value of loins from company II showed significantly lower level and tended to decrease during storage. However, the water holding capacity and the purge loss of loins from company II increased during storage periods.

• Journal of Powder Materials
• /
• v.26 no.6
• /
• pp.487-492
• /
• 2019

Titanium dioxide (TiO₂) is a typical inorganic material that has an excellent photocatalytic property and a high refractive index. It is used in water/air purifiers, solar cells, white pigments, refractory materials, semiconductors, etc.; its demand is continuously increasing. In this study, anatase and rutile phase titanium dioxide is prepared using hydroxyl and carboxyl; the titanium complex and its mechanism are investigated. As a result of analyzing the phase transition characteristics by a heat treatment temperature using a titanium complex having a hydroxyl group and a carboxyl group, it is confirmed that the material properties were different from each other and that the anatase and rutile phase contents can be controlled. The titanium complexes prepared in this study show different characteristics from the titania-formation temperatures of the known anatase and rutile phases. It is inferred that this is due to the change of electrostatic adsorption behavior due to the complexing function of the oxygen sharing point, which crystals of the TiO₆ structure share.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.4
• /
• pp.393-401
• /
• 2018

Natural fibers derived from lignocellulosic materials are considered to be more environment-friendly than petroleum-based synthetic fibers. Several natural fibers, such as seedpod fibers, have a potential for development, including kapok and balsa fibers. The characteristics of both fibers were evaluated to determine their suitability for specific valuable applications. The purpose of this study was to analyze some important fundamental properties of kapok and balsa fibers, including their dimensions, morphology, chemical components, and wettability. The results showed that the average fiber lengths for kapok and balsa were 1.63 and 1.30 cm, respectively. Kapok and balsa fibers had thin cell walls and large lumens filled with air. The kapok fiber was composed of 38.09% ${\alpha}-cellulose$, 14.09% lignin, and 2.34% wax content, whereas the balsa fiber was composed 44.62% ${\alpha}-cellulose$, 16.60% lignin, and 2.29% wax content. The characteristics of kapok and balsa fibers were examined by X-ray diffraction, Fourier-transform infrared spectroscopy and differential scanning calorimetry analyses. The contact angle of the distilled water on kapok and balsa fibers was more than $90^{\circ}$, indicating that both fibers are hydrophobic with low wettability properties because of to the presence of wax on the fiber surface.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.6
• /
• pp.117-126
• /
• 2005

The chemical property analysis on the deposited clay using scanning electron microscope and energy dispersive x-ray spectrometer were performed. Also, the triaxial compression tests and consolidation tests using NaCl aqueous solution and leachate as substitute pore (or saturated) water in samples were carried out to find out the behaviour characteristics of strength and deformation of contaminated deposited clay. from the chemical composition analysis results of clay samples, the magnitudes of composition ratio were revealed in the order of O, C, Si, Al, and Fe. Of these, why the ratio of carbon appeared to be large is estimated as due to the increase of the phyto-planktons after the construction of tide embankment. In the triaxial compression test and consolidation test results, the shear strength and compression properties have increased with the increase in concentration of contaminant (NaCl). This phenomenon is considered as to be caused by the changes of soil structure to flocculent structure owing to the decrease in the thickness of diffuse double layer in proportion to increase in the concentration of electrolyte.

• Applied Chemistry for Engineering
• /
• v.10 no.2
• /
• pp.218-224
• /
• 1999

Continuous ion exchange characteristics of the synthetic coolant contained Ni, Co and Ag ions of low concentration in acidic-oxidizing conditions have been studied to suggest the guideline for the optimum operation of mixed-bed demincralizer during the shutdown period of a pressurized water reactor (PWR). In the effect of the form of cation resins on the removal capacity of metal ions, the performance of a $H^+$-form resin was about 6% higher than that of a $Li^+$-form resin. Mixed-bed of cation and anion resins in comparison with nonmixed-bed of them, had no affected on the removal capacity of metal ions but very slightly increased the slope of breakthrough curves of metal ions. In the effect related to acidic-oxidizing conditions of the coolant, the addition of boric acid very slightly decreased the slope of breakthrough curves of metal ions, while the addition of hydrogen peroxide slightly decreased the removal capacity of metal ions.

• Membrane Journal
• /
• v.16 no.1
• /
• pp.68-76
• /
• 2006

This is the research about the concentration of trace citrus flavor components in water by pervaporation. We have investigated the permeation characteristics depending on the material and formation of membranes using four siloxane-based polymer composite membranes. We have also chosen the optimal membrane and investigated the permeation characteristics depending on the feed temperature, concentration and flow rate. And then it has been analyzed by using resistance-in series model. In the permeation experiment of citrus essence aroma model solution through the four siloxane-based polymer composite membranes, PVDF/POMS membranes have showed the best flavor flux and enrichment factor. As a result of the permeation experiment depending on the feed temperature, concentration and flow rate, we can find that as the feed temperature and concentration increase, the flavor flux increases while the enrichment factor decreases. And the flavor flux and enrichment factor increased as the flow rate increases.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.10
• /
• pp.1591-1602
• /
• 2019

Objective: The present study was conducted to evaluate the antioxidant potential of paneer, a soft cheese supplemented with various water soluble date extracts during storage. Further, the whey obtained from all the paneer samples was also investigated for its antioxidant potential. Methods: The date cultivars were evaluated for their physico-chemical characteristics and date extracts were assessed for their antioxidant potential. Physico-chemical evaluation, microbiological quality and further antioxidant potential of the prepared paneer were carried out during storage period (0 to 8 days, $5^{\circ}C$). Results: All the date extracts were found to have considerable antioxidant activity due to presence of total phenolics and flavonoids. Owing to the presence of phenolics and flavoinds in date extracts, supplemented paneer showed higher trolox equivalent antioxidant capacity, reducing power and 2, 2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging activity than control paneer. Paneer supplemented with Rabi extracts had the highest total phenolics ($190.7{\mu}g$ gallic acid equivalent/g paneer), DPPH radical scavenging activity ($928.1{\mu}mol$ equivalent of Trolx/g paneer) and trolox equivalent antioxidant capacity ($9.2{\mu}mol$ equivalent of Trolx/g paneer). The whey obtained from control paneer showed lower values of total phenolics, total flavonoids, DPPH, trolox equivalent antioxidant capacity and reducing power as compared to the values of whey obtained from paneer supplemented with date extracts. Conclusion: Paneer supplemented with date extracts and its whey may offer potent antioxidant activity.

• Applied Chemistry for Engineering
• /
• v.22 no.5
• /
• pp.508-513
• /
• 2011

Hemp is known as one of the most productive and useful plants, which grows quickly in a moderate climate with only moderate water and fertilizer. Traditionally in Korea, hemp bast is used to natural fibres, and remaining such as stem and root is treated as waste. Those of hemp by-products can be transformed to bio fuel such as bio-oil and activated carbon. To understand pyrolysis characteristics, thermogravimetric analysis were carried out in TGA, in which hemp by-products were mostly decomposed at the temperature range of $270{\sim}370^{\circ}C$. The corresponding kinetic parameters including activation energy and pre-exponential factor were determined by differential method over the degree of conversions. The values of activation energies for pyrolysis were increased as the conversion increased from 10 to 90%.