• Title/Summary/Keyword: water chemical characteristics

Search Result 2,151, Processing Time 0.037 seconds

Characteristics of Zeta Potential Distribution in Silica Particles

  • Kim, Jin-Keun;Lawler, Desmond F.
    • Bulletin of the Korean Chemical Society
    • /
    • v.26 no.7
    • /
    • pp.1083-1089
    • /
    • 2005
  • Most experimental studies available in the literature on filtration are based on observed average zeta potential of particles (usually 10 measurements). However, analyses of data using the average zeta potential alone can lead to misleading and erroneous conclusions about the attachment behavior because of the variation of particle zeta potentials and the heterogeneous distribution of the collector surface charge. To study characteristics of zeta potential, zeta potential distributions (ZPDs) of silica particles under 9 different chemical conditions were investigated. Contrary to many researchers’ assumptions, most of the ZPDs of silica particles were broad. The solids concentration removal was better near the isoelectric point (IEP) as many researchers have noticed, thus proper destabilization of particles is very important to achieve better particle removal in particle separation processes. While, the mean zeta potential of silica particles at a given coagulant dose was a function of particle concentration; the amount of needed coagulant for particle destabilization was proportional to the total surface charge area of particles in the suspension.

Water characteristics and similarity analysis of wetland plant communities in 4 types of small irrigation ponds in western Civilian Control Zone in Korea (서부민간인 통제구역에서 4가지 둠벙 유형에 따른 수환경 특성과 습생식물 군집의 유사성 분석)

  • Kim, Seung-Ho;Kim, Jae-Hyun;Kim, Jae-Geun
    • Journal of Wetlands Research
    • /
    • v.13 no.3
    • /
    • pp.581-591
    • /
    • 2011
  • To reveal the relationship between pond type and chemical water characteristics and wetland flora, we investigated 8 small irrigation ponds in CCZ, which represent 4 types of irrigation ponds. Cation and anion concentrations in water were low at spring type ponds and cation or anion concentrations were high at others. Especially, Kyeongeuisun pond, which is water exchanging type, had high cation and anion concentrations. This indicates that water source of this ponds is surface water. CCA showed that chemical water characteristics and wetland flora were reflected in pond types. However, water exchanging type ponds were not clustered in a group, which comes from the difference in water source and we suggest that water source should be an additional criteria to devide pond type of water exchanging.

Research on the development law of karst fissures and groundwater characteristic in Xintian County

  • Xin, Zhou;Tengfei, Yao;Can, Wang;Jian, Ou;Pengfei, Zheng;Kaihong, Chen;Xiting, Long
    • Membrane and Water Treatment
    • /
    • v.13 no.6
    • /
    • pp.303-312
    • /
    • 2022
  • The natural hydrology and geological conditions of Xintian County was investigated, the development law of regional karst fissures was studied, the groundwater was collected and tested through a large-scale collection of groundwater to obtain the change law of chemical characteristics and water quality characteristics of groundwater, and the water quality evaluation was carried out for the regional karst groundwater in this paper. The results show that, the whole area is dominated by carbonate rock distribution areas, and the distribution of water systems is relatively developed. The strata are distributed from the Lower Paleozoic Cambrian to the Cenozoic Quaternary, and contain multiple first-order folds. The regional karst dynamic action is strong, and many tunnels or caves of different scales were shown, which are conducive to the enrichment of groundwater. Karst groundwater is neutral and alkaline water, the water is clear and transparent with good taste, and meets the national drinking water hygiene standards. The content of toxic trace elements and fluoride in the water source is generally lower than the limit value specified by the national standard and the accumulated toxic heavy metals is never found. The overall water quality is of good quality and suitable for the development and utilization of various purposes.

A Study on V-I Characteristics of Hydrogen-Oxygen Gas Generator

  • Yang Seung-Heun;Kang Byoung-Hee;Gho Jae-Soek;Mok Hyung-Soo;Choe Gyu-Ha
    • Proceedings of the KIPE Conference
    • /
    • 2001.10a
    • /
    • pp.109-112
    • /
    • 2001
  • Water-Electrolyzed gas is a mixed gas of the constant volume ratio 2:1 of Hydrogen and Oxygen gained from electrolyzed water, and it has better characteristics in the field of economy, efficiency of energy, and environmental intimacy than acetylene gas and LPG (Liquefied Petroleum Gas) used for existing gas welding equipment. So studies of Water-Electrolyzed gas are activity in progress nowaday, and commercially used as a source of thermal energy for gas welding in the industry. The object of this paper is getting a V-I characteristic of Hydrogen-Oxygen Gas Generator using DC source. First, chemical analysis of electrolysis is conducted and the relation of electrical energy and then chemical energy is investigated through the faraday's laws.

  • PDF

The flow of $CO_{2}$ and $N_{2}$ gases through Asymmetric polytherimide Membrane

  • Park, You-In;Lee, Kew-Ho
    • Proceedings of the Membrane Society of Korea Conference
    • /
    • 1995.09a
    • /
    • pp.73-85
    • /
    • 1995
  • The asymmetric hollow fiber membranes were prepared by the wet spining of polyetherimide dope solution and the effect of hollow fiber structures on the permeation characteristics of carbon dioxide and nitrogen gases through these membrane were investigated. As the concentration of the $\gamma$-butyrolactone (GBL) in dope solution, acting as a swelling agent was increased, the structure of hollow fiber was changed from the finger to sponge type. The permeabilities of gases (CO$_{2}$, N$_{2}$) through these membrane were measured over the wide range of pressure under different temperature. The effect of water vapor on the permeabilities of gases was also investigated. The measured permeabilities showed the different characteristics depending on the structure of membranes. It was found that the flow through the pores were dominant over the polymers matrix. Blocking effect by water vapor in the pores of skin layer greatly improved the ideal separation factor of carbon dioxide/nitrogen.

  • PDF

Isolation and Characterization of a Water-Soluble Polysaccharide from the Mycelia of Solid Cultured Agaricus blazei Murill

  • Chung, Ha-Yull;Cho, Young-Jun;Kim, Tae-Wook
    • Food Science and Biotechnology
    • /
    • v.14 no.2
    • /
    • pp.259-262
    • /
    • 2005
  • A fraction (CMEx-AH-${\beta}$) of water-soluble polysaccharides, showing selective antitumor activities, was isolated from the mycelia of solid cultured Agaricus blazei Murill by hot-water extraction, ethanol precipitation, and series of chromatography. Chemical characteristics of CMEx-AH-${\beta}$, were as follows: carbohydrate content, 48%; monosaccharide composition, Man:Glu:Gal (2:93:5); molecular weight, $2{\times}10^5$; uronic acid content, 6.2%. Fundamental structure of CMEx-AH-${\beta}$, was deduced as ${\beta}-(1\;{\rightarrow}\;6)$-D-glucan with ${\beta}-(1\;{\rightarrow}\;3)$-D-glucosidic side chains based on results of methylation and $^{13}C$ NMR spectroscopic analyses.

A Study on the Arsenic Removal Characteristics of TiO2 Powders in Ground Water (상용 TiO2의 지하수 비소제거 특성에 관한 연구)

  • Lee, Dong Ho;Kim, Sung Su
    • Journal of Korean Society on Water Environment
    • /
    • v.31 no.6
    • /
    • pp.632-636
    • /
    • 2015
  • This study aims to evaluate arsenic adsorption efficiencies over various metal oxides (CeO2, TiO2, Fe3O4, ZrO2, AlOOH, SiO2, α-Al2O3, and γ-Al2O3) and investigate the correlation between physico-chemical characteristics of metal oxides and their efficiencies. From XPS, XRD BET analysis and isotherm adsorption test, TiO2 powder showed that the best adsorption efficiency, and it's mechanism was highly depended on the chemical adsorption.

Isolation and Characterization of a Water-Soluble Polysaccharide from the Mycelia of Solid Cultured Phellinus linteus

  • Chung, Ha-Yull;Kim, Tae-Wook
    • Food Science and Biotechnology
    • /
    • v.14 no.6
    • /
    • pp.783-787
    • /
    • 2005
  • Fraction (PMEx-AH-${\beta}$) of water-soluble polysaccharide, showing stimulating activity against macrophages, was isolated from mycelia of solid cultured Phellinus linteus by hot-water extraction, ethanol precipitation, and chromatography. Chemical characteristics of PMEx-AH-${\beta}$ were as follows: carbohydrate content, 71%; monosaccharide composition, Man:Glu:Gal (9:64:27); molecular weight, $1-7{\times}10^4$; uronic acid content, 6.8%. Fundamental structure of PMEx-AH-${\beta}$ is deduced as ${\beta}$-($1{$\rightarrow}6$)-D-glucan with ${\beta}$-($1{\rightarow}3$)-D-glucosidic side chains based on methylation analysis.

Comparison of Characteristics of XLPE for Distribution Power Cables (배전케이블용 XLPE의 특성 비교)

  • 서광석;김종은;이건주;김영호;정진수
    • Journal of the Korean Institute of Electrical and Electronic Material Engineers
    • /
    • v.11 no.9
    • /
    • pp.671-682
    • /
    • 1998
  • Chemical structure and electrical characteristics of 5 commercial crosslinked polyethylenes (XLPE) used as insulating materials for medium voltage distribution power cables in Korea were investigated. It was found that each XLPE shows different properties depending on the type of XLPE. Chemical structural irregularities of pellets change considerably by crossliking reaction, with some irregularities being disappeared after crosslikeng reaction. It was also found through a solvent extraction study that additives such as crosslinking agent and antioxidants act as major source retarding water tree growth. Low molecular weight polyethylene chains plays a different role in water tree growth of XLPE.

  • PDF

ESTIMATION FOR DEWATERABILITY ON INTERACTION BETWEEN CATIONIC FLOCCULANTS AND IONIC MATERIALS IN DISSOLVING WATER

  • Bae, Young-Han;Lee, Sung-Sik
    • Environmental Engineering Research
    • /
    • v.11 no.5
    • /
    • pp.266-276
    • /
    • 2006
  • Commonly, the flocculant is dissolved in process or recycle water in industrial plant which has many ionic materials. Therefore, the polymer degradation in aqueous solution by chemical, mechanical or bacteriological may occur, sometimes rapidly. Even if the same flocculant is dissolved, the flocculation characteristics and the properties of dissolving polymer varied with the kind of dissolving water. In this study, we try to estimate the interaction between flocculants and ionic materials in dissolving water using self inversing emulsion polymer; polyacrylamide-co-trimethyl ammonium ethyl acrylate chloride flocculants which have varying molecular weights and structures at a several conditions. The polymeric flocculant is dissolved in artificial dissolving water with Potassium Chloride (PC), Calcium Chloride anhydrous (CC), Potassium Hydroxide (PH), Sodium Chloride (SC), Sodium Bromate (SB) and Iron (II) Sulfate Heptahydrate (IS) as ionic sources. Experimental results indicate that the cationic and anionic ions in dissolving water induce the hydrolysis, degradation of cationic functional group and uncoiling of polymeric flocculants, therefore, the flocculation efficiency decreased by undesired polymer. According that result, it is important to estimate not only its structures and physical properties but also the qualities of dissolving water to optimize the efficiency.