• Tribology and Lubricants
• /
• 제34권6호
• /
• pp.209-216
• /
• 2018

Sapphire is a substrate material that is widely used in optical and electronic devices. However, the processing of sapphire into a substrate takes a long time owing to its high hardness and chemical inertness. In order to process the sapphire ingot into a substrate, ingot growth, multiwire sawing, lapping, and polishing are required. The lap grinding process using pellets is known as one of the ways to improve the efficiency of sapphire substrate processing. The lap grinding process ensures high processing efficiency while utilizing two-body abrasion, unlike the lapping process which utilizes three-body abrasion by particles. However, the lap grinding process has a high material removal rate (MRR), while its weakness is in obtaining the required surface roughness for the final polishing process. In this study, we examine the effects of free abrasives in lap grinding on the material removal characteristics of sapphire substrate. Before conducting the lap grinding experiments, it was confirmed that the addition of free abrasives changed the friction force through the pin-on-disk wear test. The MRR and roughness reduction rate are experimentally studied to verify the effects of free abrasive concentration on deionized water. The addition of free abrasives (colloidal silica) in the lap grinding process can improve surface roughness by three-body abrasion along with two-body abrasion by diamond grits.

• Structural Engineering and Mechanics
• /
• 제71권3호
• /
• pp.317-327
• /
• 2019

The aim of this paper is to present the most important issues on the implementation, operation and maintenance of foundation for machines. The article presents the newest solutions both in terms of technology implementation as well as materials used in construction of such structures. Foundations for machines are special building structures used to transfer loads from an operating machine to the subsoil. The purpose of these foundations is not just to transfer loads, but also to reduce vibrations occurring during operation of the machine, i.e. their damping and preventing redistribution to other elements of the building. It should be noted that foundations for machines (particularly foundations for hammers) are the most dynamically loaded building structures. For these reasons, they require precise static and dynamic calculations, accuracy in their implementation and care for them after they have been made. Therefore, the paper in detail present the guidelines regarding: design, construction and maintenance of structures of this type. Furthermore, the most important parameters and characteristics of materials used for the construction of these foundations are described. As a result of the conducted analyzes, it was found that the concrete mix, in foundations for machines, should have a low water/binder ratio. For its execution, it is necessary to use broken aggregates from igneous rocks and binders modified with mineral additives and chemical admixtures. On the other hand, the reinforcement of composites should contain a large amount of structural reinforcement to prevent shrinkage cracks.

• 한국축산식품학회지
• /
• 제41권2호
• /
• pp.196-213
• /
• 2021

The objective of this study was to determine the effects of yeast cultures (Candida zeylanoides and Debaryomyces hansenii) isolated from traditionally dry fermented Turkish sucuks, on some physicochemical and microbiological properties of the product. Eight different batches of the sucuks were produced by the inoculation of yeast and lactic acid bacteria (LAB) cultures (Lactobacillus curvatus, Lactobacillus plantarum and Lactobacillus sakei) in different combinations. The sucuks were ripened for 12 days and analyzed at 1st, 6th, and 12th days of ripening. Percent moisture content, pH, water activity (aw) and residual nitrite values of the sucuk inoculated with the yeast cultures were higher at the end of the ripening. The use of yeast cultures decreased hardness, gumminess, and chewiness values of the sucuk while increased adhesiveness values. Major volatile groups were aldehydes, terpenes, and sulphur compounds in the sucuk samples. The most noticeable results were for sensory properties of the sucuk that were positively improved by the yeast cultures.

• Design & Manufacturing
• /
• 제15권4호
• /
• pp.57-64
• /
• 2021

In recent materials industry, researches on the technology to manufacture super hydrophobic surface by effectively controlling the wettability of solid surface are expanding. Research on the fabrication of super hydrophobic surface has been studied not only for basic research but also for self-cleaning, anti-icing, anti-friction, flow resistance reduction in construction, textile, communication, military and aviation fields. A super hydrophobic surface is defined as a surface having a water droplet contact angle of 150 ° or more. The contact angle is determined by the surface energy and is influenced not only by the chemical properties of the surface but also by the rough structure. In this paper, maskless lithography using DMD, electro etching, anodizing and hot embossing are used to make the polymer resin PMMA surface super hydrophobic. In the fabrication of microstructure, DMDs are limited by the spacing of microstructure due to the structural limitations of the mirrors. In order to overcome this, maskless lithography using a transfer mechanism was used in this paper. In this paper, a super hydrophobic surface with micro and nano composite structure was fabricated. And the wettability characteristics of the micro pattern surface were analyzed.

• 방사성폐기물학회지
• /
• 제21권2호
• /
• pp.271-281
• /
• 2023

A study was conducted on the vitrification of the rare earth oxide waste generated from the PyroGreen process. The target rare earth waste consisted of eight elements: Nd, Ce, La, Pr, Sm, Y, Gd, and Eu. The waste loading of the rare earth waste in the developed borosilicate glass system was 20wt%. The fabricated glass, processed at 1,200℃, exhibited uniform and homogeneous surface without any crystallization and precipitation. The viscosity and electrical conductivity of the melted glass at 1,200℃ were 7.2 poise and 1.1 S·cm^-1, respectively, that were suitable for the operation of the vitrification facility. The calculated leaching index of Cs, Co, and Sr were 10.4, 10.6, and 9.8, respectively. The evaluated Product Consistency Test (PCT) normalized release of the glass indicated that the glass satisfied the requirements for the disposal acceptance criteria. Furthermore, the pristine, 90 days water immersed, 30 thermal cycled, and 10 MGy gamma ray irradiated glasses exhibited good compressive strength. The results indicated that the fabricated glass containing rare earth waste from the PyroGreen process was acceptable for the disposal in the repository, in terms of chemical durability and mechanical strength.

• 한국정밀공학회지
• /
• 제14권2호
• /
• pp.58-65
• /
• 1997

Work rolls used in cold rolling mills must have outstanding wear resistance and very little plastic defor- mation. Thus, these rolls require a higher surface hardness and harding to a greater depth. To meet these requirements, the rolls, in general, have basic chemical composition of 0.7 to 1.0% carbon and 1.0 to 5.0% Cr(chromium), plus a small amounts of special elements, and are subjected to intensive water quenching and tempering at low temperature to provide a surface hardness of over 90 shore. This test results are as follows. Deflection and fracture load of 5% Cr material are than those of 3% Cr material and show flat curve from surface to subsurface. It will be clear that 5% Cr work roll has a superior resisti- bility against wear and abrasion comparing with 3% Cr work roll. The improvement of wear and abrasion in 5% Cr work roll will be achieved by the large amount of wpheroidal carbide. In grindability and polish, 5% Cr work roll will be a little inferior comparing with 3% Cr work roll.

• 환경영향평가
• /
• 제22권2호
• /
• pp.135-145
• /
• 2013

The recycling of coal bottom ash generated from coal power plants in Korea has been limited due to heterogenous characteristics of the materials. The most common management option for the ash is disposal in landfills (i.e. ash pond) near ocean. The presence of large coarse and fine materials in the ash has prompted the desire to beneficially use it in an application such as fill materials. Prior to reuse application as fill materials, the potential risks to the environment must be assessed with regard to the impacts. In this study, a total of nine test cells with bottom ash samples collected from pretreated bottom ash piles and coal ash pond in a coal-fired power plant were constructed and operated under the field conditions to evaluate the leachability over a period of 210 days. Leachate samples from the test cells were analyzed for a number of chemical parameters (e.g., pH, salinity, electrical conductance, anions, and metals). The concentrations of chemicals detected in the leachate were compared to appropriate standards (drinking water standard) with dilution attenuation factor, if possible, to assess potential leaching risks to the surrounding area. Based on the leachate analysis, most of the samples showed slightly high pH values for the coal ash contained test cells, and contained several ions such as sodium, potassium, calcium, magnesium, chloride, sulfate, and nitrate in relatively large quantities. Three elements (aluminum, boron, and barium) were commonly detected above their respective detection limits in a number of leachate samples, especially in the early leaching period of time. The results of the test cell study indicate that the pollutants in the leachate from the coal ash test cells were not of a major concern in terms of leaching risk to surface water and groundwater under field conditions as fill materials. However, care must be taken in extending these results to actual applications because the results presented in this study are based on the limited field test settings and time frame. Structural characteristics and analysis for coal bottom ash may be warranted to apply the materials to actual field conditions.

• 한국토양환경학회지
• /
• 제5권3호
• /
• pp.65-75
• /
• 2001

본 연구는 제주도의 전체 지하수공 중 수역별로 대표성이 있는 150공을 선정하여 고도에 따른 수질 특성을 파악하는데 목적을 두었다. 수질특성의 평가는 물리.화학적 특성과 통계분석을 이용하였다. Piper diagram에 의한 수질 유형은 표고 50m이하 지역은 $Na^{+}$＋ $K^{+}$-C $l^{-}$ 형태를 보이고 있다. 40~100 m에 위치한 지하수에서는 $Na^{+}$＋ $K^{+}$-HC $O_3$$^{-}$ ＋C $O_3$$^{2-}$ 형태와 일부 $Na^{+}$＋ $K^{+}$-C $l^{-}$ 형태의 군을 이루고 있다. 그리고 100 m이상의 지역에서는 $Na^{+}$＋ $K^{+}$-HC $O_3$$^{-}$ ＋C $O_3$$^{2-}$ 형태에 속하고 있다. 요인분석 결과, 50 m이하와 100 m이상 지역에서 공통적으로 TDS와 오염물질 2개 요인이 추출되었다. 50~100m지역에는 3개의 요인이 추출되었으며, 요인1에는 TDS함량으로 요인2는 오염의 영향과 광물용해로 볼 수가 있다. 그리고 요인 3에는 HC $O_3$$^{-}$ 함량으로 나타났다..

• 한국식품영양과학회지
• /
• 제36권11호
• /
• pp.1451-1457
• /
• 2007

수창포의 부위별 건조조건을 달리한 분말의 일반성분, 당 및 클로로필 등을 분석 검토하였다. 각 부위별 수분의 함량은 모두 온도가 증가할수록 낮았고, 동결건조를 실시한 시료가 가장 낮았다. 회분함량은 온도가 증가할수록 같거나 높아졌으며 동결 건조한 시료의 함량이 가장 낮았다. 조지방과 조단백 함량은 각 부위별 건조방법에 따라 유의적 차이가 없었다. 색도 중 잎의 품질특성에 중요한 $a^*$값은 잎상부가 하부에 비하여 $a^*$값이 낮아 품질 면에서 우수하였다. 클로로필 함량 역시 잎상부가 하부에 비하여 함량이 높았다. 환원당함량은 뿌리에 높았으며, 특히 $40^{\circ}C$ 열풍 건조한 시료가 가장 높았으며, 총당 함량은 건조조건별로 차이가 없었으며 잎상부가 가장 높았다. 총 폴리페놀은 창포의 잎에서 상당히 높은 함량은 보였으며, 건조조건에 따라서 유의성 검정 결과 큰 차이는 없었지만 잎이 뿌리보다 상당히 높은 함량은 나타내었다. 총 플라보노이드는 뿌리와 잎에서 고른 분포를 나타내었으나 잎상부가 더 높은 함량을 나타내었다. 위의 결과로 시료의 품질저하를 막기 위해서는 동결건조를 실시하는 것이 유리할 것으로 생각된다.

• 대한환경공학회지
• /
• 제33권8호
• /
• pp.572-577
• /
• 2011

비점오염부하량 산정을 위해 사용되는 원단위는 쉽게 이용 가능하지만, 지역의 토지이용 특성과 강우강도의 시간적인 변이를 고려하지 못하는 단점이 있다. 본 연구에서는 간편하면서도 강우량에 따른 부하량 변화를 고려한 보다 정확한 비점부하량 산정방법을 개발 및 적용하였다. 경기도 경안천 유역에 위치한 두 개의 비점오염저감시설을 대상으로 2010년 6월부터 11월까지 모니터링을 수행하여 강우강도, 유출 특성, 오염부하 등에 관한 분석을 진행하였다. 비점오염원 유출수의 특성을 나타내는 유량가중평균농도(Event Mean Concentration; EMC)의 경우에는 도시 지역인 경기도 광주시 경안동이 산과 밭으로 이루어진 용인시 모현면에 비해 높거나 비슷한 값을 보였으나, TP (Total Phosphorus)의 경우 유역 내 농경지에 사용된 퇴비나 비료에 포함된 인의 영향으로 모현면이 경안동보다 더 높게 나타났다. 강우량과 오염물질 배출부하량과의 관계는 3차원 다항식에 의해 가장 잘 설명되었으며, 0.33~0.81 범위의 결정계수를 나타내고 있다. 산정된 유출율 및 부하량 함수의 기울기가 EMC 결과와 반대되는 경향을 보이는 것으로부터, 비점오염원은 토지이용 이외에도 지형, 토성, 수리 수문현상 등에 따라 배출특성이 달라짐을 알 수 있다. 따라서 비점오염물질의 유출 특성을 정확히 파악하기 위해서는 장기모니터링을 통한자료의 수집을 바탕으로 강우량에 따른 부하량 변화를 고려한 비점부하량 산정함수를 구하는 것이 필요하다.