• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2000년도 제20회 KOSCO SYMPOSIUM 논문집
• /
• pp.93-104
• /
• 2000

Rivers of our country are in the serious state of water pollution because of sewages, factory wastes, domestic animal excreta, and so forth. The development of waste water treatment technology applied in a small-scaled farm is urgent because the government regulation becomes strict. In the present study, four types of solid fuels are made by blending domestic animal excreta, rice hulls and briquets, and its combustion characteristics is investigated by analyzing burning pictures. Domestic animal excreta sampled from a farm in Kimhae was dried with sunlight. From experimental results, it is shown that combustion characteristics of solid fuels becomes better by blending rice hulls which have superior ignitability. Since solid fuel made by blending domestic animal excreta with rice hulls can bum continuously, it can be appropriate for the heating fuels.

• 한국응용과학기술학회지
• /
• 제27권3호
• /
• pp.240-248
• /
• 2010

The blending effects of surfactants on the polystyrene emulsion polymerization were studied. The blending of Triton X-100 and SDS affects to the interfacial properties of the styrene monomer and water phases, and finally, the properties of the polystyrene latex particles. As the blending ratio of SDS/Triton X-100 increases, the interfacial tension and CMC of the blended surfactants were decreased and results in a reducing the size of the latex particles. It was found that the interfacial tension was reduced when the surfactant were blended. By increasing the SDS content, the interfacial tension was reduced, and, at a certain condition, the interfacial tension was reached to an extremely low value to form micro-emulsion and the nano-sized latex particles (80~110 nm).

• 공업화학
• /
• 제19권2호
• /
• pp.205-208
• /
• 2008

저가인 aromatic elastomer polymer인 polySEBS와 PS의 방향족 작용기에 술폰기를 도입시킴으로써 sulfonated polySEBS과 sulfonated PS를 얻었다. 이 술폰화된 고분자를 활용하여 고분자 전해질 연료전지의 이온 교환막으로 사용될 수 있는 새로운 sulfonated polySEBS/sulfonated PS blending films를 제조하였다. 이 필름들의 수소이온 전도도는 sulfonated polySEBS와 sulfonated PS의 혼합비에 따라 $10^{-2}{\sim}10^{-3}S/cm$로 다양하게 나타났다. 특히, sulfonated polySEBS 10.0 g에 sulfonated PS를 0.5 g 첨가하여 제조한 film이 0.75 meq/g의 이온교환용량 및 25%의 함수율과 함께 가장 우수한 0.07 S/cm의 이온전도도를 나타냈다.

• 펄프종이기술
• /
• 제33권3호
• /
• pp.29-36
• /
• 2001

This paper was made to evaluate the effect of the blending ration of GCC and No. 1 clay on the printability by investigating the structure of pore such as the pore rate, the number of pores, pore size and distribution of coated paper. The coated structure is mainly depended on the results of correlation between pigment and binder. It means that the structure of the pore occurred is chiefly affected by the blending ratio of GCC and No. 1 clay. This physical properties of the pore have a close relation with ink set-off associated with the drying rate and the penetration in ink into base paper and with printing gloss. Therefore it was needed to find out how the pore structure and the printability will be changed by modifying the blending ratio of GCC and No. 1 clay to vary the pore structure of coated paper. Below are the results of measurement: As the blending ratio of clay going up, water retention, sedimentation volume. smoothness, and paper gloss were increased, but relatively brightness and opacity were decreased. Pore rate was the highest at the blending ratio of No. 1 clay to GCC, 70:30. In this case, average pore radius was also increased. Ink receptivity and K&N ink receptivity were improved with the increase of the blending ratio of GCC, where was, ink setting was vice versa. No difference was observed in the weight of ink, but ink repellance decrease with the decrease of blending ratio of GCC.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(II)
• /
• pp.493-496
• /
• 2005

The Re-mi-con sludge water has been investigated because of environmental pollution and disposal cost. So, sludge water is partially reused as mixing water. However, if sludge water is reused too much that would influence the quality of concrete. KS specification limits the amount of sludge content up to 3$\%$ of cement weight. In this study, the effect of re-mi-con sludge on the characteristics of concrete is compared to raise the reuse ratio of re-mi-con sludge. From the test results, as blending ratio of re-mi-con sludge increases, workability is decreases. However, the re-mi-con sludge water have a minor effect on the strength development, the drying shrinkage and the resistance of freeze and thawing. Also, the existing model codes of drying shrinkage do not coincide with the test results of this study.

• 한국환경기술학회지
• /
• 제19권6호
• /
• pp.543-549
• /
• 2018

본 연구는 정수처리장의 유기막의 처리수와 원수의 블렌딩된 혼합시료를 이용하여 무기막 처리 시 flux의 량에 따른 처리 효율을 실험실 수준에서 규명하였다. 각각의 설정된 블렌딩과 flux의 값에 따라 어떠한 성능을 내는지 고찰하고, 이를 바탕으로 각 측정항목에 따른 최고의 효율을 도출하였다. 처리원수의 수질과 처리량에 따라 서로 다른 처리효율을 보였으며, 특히 탁도제거에 큰 효율을 보였다. 또한 $UV_{254}$의 경우 처리 원수와 flux에 따른 제거 효율이 최대 69 %에서 최소 48 %로 원수의 농도에 따라 다른 제거율을 보였으며, TOC와 DOC의 경우 원수의 값이 낮아 처리 효율이 최대 22 %와 28 %의 값을 나타내었다. 이상의 결과는 무기막 공정에서 오염물질이 효과적으로 제거되는 최적의 공정이 존재함을 시사하며, 대상 원수와 운전조건에 따른 최적화가 필요함을 보인다.

• 한국응용과학기술학회지
• /
• 제7권1호
• /
• pp.63-70
• /
• 1990

Influence of mixing ratio of blending oil (rice bran oil : RBD palm olein = 1 : 1, 1 : 4 mixture: w/w) and natural tocopherol, citric acid, and sodium polyphosphate on enhancement of oxidation stability of blending oil under the condition of tap water infulx(1 ml/min/200g oil) were compared by AOM test after heating these system at l80$^{\circ}C$. In addition, the effects of tocopherol, and synergist on oxidition stability were also tested with potato chips fried with blending oil(1 : 4 mixture). The result obtained were as followes; 1. The test of RBD palm olein addition of 50% and 80% against rice bran oil on oxidation stability showed that the higher the palm olein contents in blending oil, the higher the oxidation stability. 2. The test of oxidation stability, adding l00ppm, 200ppm and 400ppm of natural tocopherol in two different types of blending oils, A(1 : 1 mixture) and B(1 : 4 mixture), disclosed that blending oil B was more positively effective, and this trend was superior at 200ppm level particularly, Furthermore, oxidation stability was enhanced remarkably upon addition of 100ppm of natural tocopherol, and 50ppm of citric acid together with 50ppm, 100ppm and 200ppm of sodium polyphosphate in general. Especially, 200ppm of sodium polyphosphate addition induced the most synergetic effect on oxidation stability showing as much as 3 times compare to control. 3. The results of oxidation stability obtained by peroxide value on potato chips fried with blending oil (1:4 mixture} added tocopherol, citric acid and sodium polyphosphate and preserved at $60^{\circ}C$ revealed that addition of tocopherol and 50ppm of citric acid together with 200ppm of sodium polyphosphate treatment was the most synergistic coinciding with AOM test results.

• Journal of Forest and Environmental Science
• /
• 제37권1호
• /
• pp.79-89
• /
• 2021

Cement bonded boards of 10 mm in thickness were produced from the mixture of Gmelina arborea sawdust and corn cob particles. The strength and dimensional stability of cement bonded composites produced from these two mixtures were examined. A total of thirty experimental boards were produced at density level of 1,000 kg/㎥ with cement to fibre ratio of 2.5:1 and 3:1 and five (5) blending proportions of G. arborea sawdust to corn cob particles of 100:0; 75:25; 50:50; 25:75 and 100:0. The effect of the cement to fibre ratio and blending proportion on the Water Absorption (WA), Thickness Swelling (TS), Modulus of Rupture (MOR), and Modulus of Elasticity (MOE) were determined. The result indicates that as the mixing ratio of cement to fibre and blending proportion of maize cob (75%) to G. arborea (25%) increased, the thickness swelling, water absorption decreased, whereas the MOR and MOE increased. It also shows that most dimensionally stable and flexural strength boards were produced at the highest level of mixing ratios (3:1) and blending proportion of G. arborea to corn cob 25:75. However, the analysis of variance shows that TS and WA were significantly different, whereas, MOE and MOR were not significantly affected by mixing ratios and blending proportions. Finding of this study has shown that maize cob particles are suitable for cement bonded board production.

• 한국환경과학회지
• /
• 제11권9호
• /
• pp.955-960
• /
• 2002

The recycled washwater, which has different water quality and is produced about 5 to 20% of the total water volume treated, affects the unit operation of water treatment, especially coagulation process. However, the effects of recycled washwater on unit operation of water treatment have not been fully investigated. In this study, effects of recycled washwater on coagulation process were investigated to find the optimum coagulation condition by analyzing turbidity, $UV_{254}$, TOC removal efficiencies. In addition, effects of recycled washwater on residual Al after coagulation were studied by analyzing soluble and particulate Al. The size distribution and fractal dimension of coagulated also analyzed. The recycled washwater was lower pH than the raw water. And the recycled washwater had higher $UV_{254}$, TOC and residual Al concentration than the raw water. Residual Al concentration of recycled washwater was about 50 times higher than that of raw water. Optimum coagulant dosages on the blending recycled washwater and the raw water for turbidity, $UV_{254}$ and Al removal were lower than that on the raw water. However, TOC removal increased by increasing coagulant dosage. The size and fractal dimension of coagulated particle produced in the blending recycled washwater were larger, which imply faster settling velocity, than those produced in the raw water only.

• 한국해양학회지:바다
• /
• 제6권1호
• /
• pp.1-12
• /
• 2001

Topex/Poseidon(T/P)고도계 자료를 조석 수치 모델에 혼합하여 북동 아시아 해역의 $M_2,\;S_2,\; K_1$, 및 $O_1$ 분조를 $5'{\times}5'$ 분해능으로 계산하여, 북동 아시아의 조석을 산정하였다. Blending 방법에 사용되는 가중 인자 값에 대한 모델반응을 검토하기 위해 $M_2$ 분조만을 고려한 수치 실험이 수행되었으며, 수치 실험을 통해 T/P 자료를 정확히 재현하되 혼합함으로써 발생하는 잡음을 줄이기 위해 가중 인자 값은 수심의 평방근에 반비례하도록 설정하였다. T/P자료에서 구한 $M_2,\;S_2,\; K_1$, 및 $O_1$ 분조를 동시에 혼합한 수치 모델 결과는 연구 해역 내의 모든 T/P궤도 자료와 비교되었다. 진폭 오차와 지각 오차의 평균은 거의 0으로 나타났다. 진폭 오차의 표준 편차는 2 cm 내외였으며, 지각오차의 표준 편차는 $10^{\circ}$보다 작았다. T/P자료를 혼합한 모델 결과는 특히 얕은 수심(h<250m)의 T/P 궤도 자료와 거의 일치하는 것으로 나타났다. 그러나 T/P 자료만으로부터 계산된 진폭과 지각은 깊은 수심 해역에 대해서는 불합리한 공간 변화를 보이는 반면, 이들 자료를 동화시킨 모델 결과는 T/P 자료와는 차이를 보이나 합리적인 진폭과 지각의 공간 분포를 보였다. 한편 T/P자료를 혼합한 모델 결과는 자료 동화에 사용하지 않은 연안 관측 자료와도 비교적 잘 일치하였다.