• Journal of the Korean Society of Food Science and Nutrition
• /
• v.14 no.3
• /
• pp.305-313
• /
• 1985

There is a trend that the total number of cancer cases is steadily increasing as the population grows. It has been estimated that 85% of the cancer rate in the U.S. is attributed to environmental factors. Among the environmental factors, diet and nutrition appear to be related to the largest number of human cancers. Diet and nutrition might be related to cancer by several mechanisms. Food may contain a direct carcinogen or precursors that become carcinogens by spontanous reactions, or by host metabolism, or through the actions of microbial flora. Chemicals that cause cancers generally have reactive electrophilic centers which can combine with electron-rich atoms in nucleic acids and cause cancers by changing the genetic activity of the cells. A variety of factors in foods might be involved in the etiology of carcinogenesis. Chemicals in food that cause cancers include carcinogens of plants and animal origin and also those in drinking water. Other then these, fungal metabolites alcohol, asbestos, heavy metals, pesticides, and food additives might be included as food carcinogenesis. The method of cooking foods also might contribute to carcinogenesis. Some chemicals in foods act as promoters in carcinogenesis. Prevention of cancers by dietary practises have received much interest. Consumption of certain vegetables or cellulose can reduce carcinogenic activity of several compounds. A variety of antioxidants or micronutrients may be effective anticarciongens. Glutathione in the soluble fraction of the cells, is a major defense against oxidative and alkylating carcinogens. Recently anticarcinogenic activity of chlorophyll was demonstrated. Daily consumption of milk appears to effectively reduce stomach cancer.

• Journal of the Korean Ceramic Society
• /
• v.29 no.5
• /
• pp.357-366
• /
• 1992

Residual organics were considered as impurity in Sol-Gel method. The purpose of this study was to find the conditions to contain as much residual organics as possible in silica gel prepared from TEOS(tetraethylortho-silicate) by Sol-Gel method. Residual organics are to be expected to have reduction effect on synthesizing Si3N4 from silica gel. The results of this study are follows: 1) The maximum content of entrapped carbon was 19.8 wt.%(C/SiO2=0.25 wt.ratio) in silica gel synthesized under the conditions 1.5 fold mole water for incomplete hydrolysis, 2.5 fold mole phenol as a solvent and 0.1 fold mole HCl as a catalyst to TEOS. 2) Silica gel with organics entrapped by Sol-Gel method had a positive effect on the formation of Si3N4 compared with commercial silica gel. 3) Sintered body of synthesized $\alpha$-Si3N4 with Y2O3 and Al2O3 as additives at 175$0^{\circ}C$ in N2 atmosphere showed bending strength, 602$\pm$20 MPa and frature toughness 4.45$\pm$0.15 MPa.m1/2.

• Proceedings of the KIEE Conference
• /
• 2008.09a
• /
• pp.207-210
• /
• 2008

In this paper, we researched the dielectric properties and voltage dependence on slice XLPE sheet from 22[kV] and 154[kV] power cable. We studied effects for impurities and water for semiconductor shield through a dielectric properties experiment to estimate performance of insulating materials in power cable. Capacitance and $tan{\delta}$ of 22[kV], 154[kV] were 53/43[pF] and $7.4{\times}10^{-4}$, $2.1510^{-4}$. In these results, the trend was increased with the increase of temperature. The tan6 of XLPE/semiconductor layer was increased as compared with that of XLPE. Dielectric properties reliability of tan6 was small. Also, To improve mean-life and reliability of power cable in this study, we have investigated chemical properties showing by changing the content of carbon black that is semiconductive additives for underground power transmission. Specimens were made of sheet form with the three of existing resins and the nine of specimens for measurement. Chemical properties of specimens was measured by FT-ATR (Fourier Transform Attenuated Total Reflectance). The condition of specimens was a solid sheet. We could observe functional group (C=O, carbonyl group) of specimens through FT-ATR. From these experimental result, the concentration of functional group (C=O) was high according to increasing the content of carbon black. We could know EEA was excellent more than other specimens from above experimental results.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.2 no.1
• /
• pp.5-14
• /
• 2003

Cutting fluids used for superfinishing are usually mineral based oils With sulfur and chlorine additives. These cutting fluids are an environmental hazard and can adversely affect the health of personnel on the shop floor. The present investigation was undertaken to explore the possible alternative use of environmentally-conscious cutting fluids for superfinishing. Unlike mineral oils, these environmentally-conscious cutting fluids are biodegradable and non-hazardous. Experiments were conducted for testing an ester oil manufactured by Accu-Lube applied in miniscule amounts using the Minimum Quantity Lubrication (MQL) technique. A significant improvement in stock removal was found with the 6 stones tested. The specific energy values associated with the process were also significantly lower than those obtained previously with conventional straight oils and the water based synthetic fluid, indicative of better lubrication, while the surface roughness was comparable. These tests prove that MQL with ester oils can be a very effective environmentally-conscious alternative to conventional straight oils.

• Plant Biotechnology Reports
• /
• v.4 no.3
• /
• pp.229-235
• /
• 2010

In this study, we established an in vitro regeneration system to maximize the recovery of leafy perilla (Perilla frutescens L. Britton) plantlets as part of developing a molecular biotechnology-based metabolic engineering program for this crop plant. Hypocotyl segments including the apical buds were used as explants for the direct production of shoots without an interim callus phase. The number of shoots produced from the apical buds peaked within 3-4 weeks, and the shoots were subsequently cultured on Murashige and Skoog (MS) media supplemented with 2 mg $1^{-1}$ benzylaminopurine (BA). Spontaneous rhizogenesis was observed after 7-10 days of culture on MS media without hormonal additives. The rooted shoots developed into normal plants in soil after hardening on distilled water for 3-4 days. The average plantlet regeneration frequency was higher for the apical buds (64.33%) than for the top (15.66%), middle (4%), and basal (1.33%) segments of the hypocotyls. This regeneration system demonstrates a capacity for high-frequency plantlet recovery and thus should be considered for use in the genetic manipulation of leafy perilla.

• Journal of Soil and Groundwater Environment
• /
• v.20 no.5
• /
• pp.11-15
• /
• 2015

The three processes of 1) high- & low-temperature microwave heatings, 2) the soil washing, and 3) the thermal desorption processes in soil remediation are analysed on the treatment cost data for 2003-2012 years. The cost of microwave heating method with at temperature 500-700℃, for 30 minutes, and at 4-6 kW is approximately 10 $/ton (13,000 ₩) due to the deep through heating of micro-wave, the soil washing with chemicals is about 80 $/ton (85,000 ₩) due to the chemicals & duration, and the thermal desorption process is around 40 $/ton (41,000 ₩) from the less efficiency. Furthermore the sustainability has been assessed, and suggestions are made. 1) Green; the minimal environmental footprint, 2) Growth; the least cost, 3) Shared; the social & environmental justice, 4) Smart; the microwave characteristics of deep through irradiation & heating, and 5) Mutuality; the flexibility of the technology. More additives including water, the government support, and public relation are suggested realizing the microwave in this condition is not harmful to human beings.

• Structural Engineering and Mechanics
• /
• v.63 no.1
• /
• pp.55-64
• /
• 2017

The paper concerns concrete carbonation, the phenomena that occurs in every type of climate, especially in urban-industrial areas. In European Standards, including Eurocode (EC) for concrete structures the demanded durability of construction located in the conditions of the carbonation threat is mainly assured by the selection of suitable thickness of reinforcement cover. According to EC0 and EC2, the thickness of the cover in the particular class of exposure depends on the structural class/category and concrete compressive strength class which is determined by cement content and water-cement ratio (thus the quantitative composition) but it is not differentiated for various cements, nor additives (i.e., qualitative composition), nor technological types of concrete. As a consequence the selected thickness of concrete cover is in fact a far estimation - sometimes too exaggerated (too safe or too risky). The paper presents the elaborated "self-terminated carbonation model" that includes abovementioned factors and enables to indicate the maximal possible depth of carbonation. This is possible because presented model is a hyperbolic function of carbonation depth in time (the other models published in the literature use the parabolic function that theoretically assume the infinite increase of carbonation depth value). The paper discusses the presented model in comparison to other models published in the literature, moreover it contains the algorithm of concrete cover design with use of the model as well as an example of calculation of the cover thickness.

• Microbiology and Biotechnology Letters
• /
• v.48 no.3
• /
• pp.358-365
• /
• 2020

An organic solvent- and bleach-stable protease-producing strain was isolated from a polluted river water sample and identified as Aeromonas veronii OB3 on the basis of biochemical properties (API 20E) and 16S rRNA sequence analysis. The strain was found to hyper-produce alkaline protease when cultivated on fish waste powder-based medium (HVSP, 4080 U/ml). The biochemical properties and compatibility of OB3 with several detergents and additives were studied. Maximum activity was observed at pH 9.0 and 60℃. The crude protease displayed outstanding stability to the investigated surfactants and oxidants, such as Tween 80, Triton X-100, and H₂O₂, and almost 36% residual activity when incubated with 1% SDS. Remarkably, the enzyme demonstrated considerable compatibility with commercial detergents, retaining more than 100% of its activity with Ariel and Tide (1 h, 40℃). Moreover, washing performance of Tide significantly improved by the supplementation of small amounts of OB3 crude protease. These properties suggest the potential use of this alkaline protease as a bio-additive in the detergent industry and other biotechnological processes such as peptide synthesis.

• Korean journal of food and cookery science
• /
• v.18 no.3
• /
• pp.319-324
• /
• 2002

In a previous study, we developed a new food additive as an egg yolk antibody (IgY) against carbohydrate digestion enzymer for the regulation of blood glucose level and weight control. The IgY delayed and decreased the increment if blood glucose level after administration of sucrose in human being by 30% in 20∼30 min. We also developed a lipase inhibitor as a water extract of two kinds of herb, Platycodon grandiflorum and Solanum Melongena, Twenty three volunteers were subjected to the intake of the egg yolk IgY Plus the herbal extracts for 50 days. In average, the treated subjects appeared to lose 1.96 kg of body weight and 3.4 kg of body fat mass during the treated period. Furthermore, Panniculus adiposus and breech size were significantly decreased during the experimental period. Above results suggested that the administration of the dietary additives composed of egg yolk IgY and natural herbal extract improve the obesity by the decrement of body weight and body fat mass.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.215-219
• /
• 2001

Impurities removal from waste carbon black was carried out to produce high-grade carbon black. A lot of hydrophilic carbon black is produced as a byproduct of the hydrogen production process by flame decomposition of water. Due to its impurity content such as sulphur, iron, ash and etc., it can only be used as low-grade carbon or burnt out. High-grade hydrophilic carbon black is 3-5 times more expensive than oil-based carbon black because of its process difficulties and requires pollutant treatment. Hydrophilic carbon is normally used far conductive materials for batteries, pigment for plastics, electric wire covering, additives for rubber, etc.. In these applications, hydrophilic carbon must maintain its high purity. In this study magnetic separation, froth flotation and ultrasonic treatment were employed to remove impurities from the low-grade hydrophilic carbon black. As results, the ash, iron and sulphur content of product decreased to less than 0.01wt.%, 0.0lwt.% and 0.3wt.% respectively, and the surface area of product was about 930 $m^2$/g.