• 한국자원식물학회지
• /
• 제20권4호
• /
• pp.267-271
• /
• 2007

본 연구는 자귀나무의 종자의 주요발아촉진법인 열탕처리에 있어 구체적인 처리시간을 구명하고자 실시하였다. 각각 0.5, 1.0, 2.0, 3.0, 5.0, 10.0분 동안 열탕처리된 종자와 무처리 종자, 24시간 침지종자의 발아특성 및 수분흡수특성을 비교한 결과, 발아율의 경우 열탕처리시 그 효과가 현저하였으며, 특히, 2.0분에서 그 효과가 가장 뛰어나 적정처리시간으로 판단되었다(p<0.01). 그러나 평균발아일수는 무처리구와 처리구간에 차이를 보이지 않았다(p=0.502). 즉, 시간별 열탕처리는 자귀나무 종자의 발아소요일수 단축에는 효과가 없었다. 발아속도 및 발아균일지수는 발아율과 유사한 경향을 나타내었다. 수분흡수특성 중 수분흡수율과 수분흡수속도상수는 무처리구와 현저한 차이를 나타내었다. 또한, 발아특성과 수분흡수특성과의 상관관계를 분석한 결과 발아특성 중 평균발아일수를 제외한 모든 특성이 수분흡수율 및 수분흡수속도상수 (24시간 침지)와 높은 상관성을 나타내었다($r=0.854{\sim}0.931$, p<0.01). 그러나 초기수분흡수속도와는 상관관계가 없었다. 한편, 발아특성들 간에는 평균 발아일수를 제외하고 모두 높은 상관을 나타내었으며(p<0.01), 수분흡수특성들 간에는 수분흡수율과 수분흡수속도상수만이 상관성을 나타내었다(r=0.9508, p<0.01).

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 가을 학술논문 발표대회
• /
• pp.178-179
• /
• 2021

Comparing the absorption volume of test pieces immersed over time in room temperature moisture with weight, WF absorbed about 40% more than PLAIN, and PLAIN stopped absorbing after 10 minutes, but WF continued to absorb. It is thought that the woven fabric layer of the core material continued to absorb moisture. In the heat transfer test, the test piece to which only WF was applied had a temperature difference of about 2℃ compared to PLAIN, and when the insulating liquid was sprayed, there was a difference in heat transfer properties of up to 5℃. This is judged to have low heat transfer properties of the basic woven fabric, but the heat insulating liquid also further reduces heat transfer properties.

• 멤브레인
• /
• 제19권4호
• /
• pp.341-347
• /
• 2009

Poly propylene carbonate (PPC)와 cloisite 20B (PPC/C-20B)을 solution method를 통하여 합성하였고, 이를 통해 합성된 나노 조성물의 morphology, 열적 특성, 수분 흡수의 특성을 평가하였다. 나노 조성물의 구조는 X-ray diffraction (XRD) 로 확인하였고, 열적 특성은 thermal gravimetric analysis (TGA)와 differential scanning calorimetric (DSC)를 이용해 분석하였다. TGA와 DSC의 결과를 통해 나노 조성물은 기존의 PPC에 비해 높은 열적 안정성을 가짐을 확인할 수 있었다. DSC측정에서 5 wt%의 clay를 포함한 nanohybrid의 유리전이온도는 순수한 PPC의 $21^{\circ}C$에서 $30^{\circ}C$로 $9^{\circ}C$ 증가하였고, TGA 측정을 통해 확인한 열분해온도($T_{d50%}$)는 순수 PPC에 비해 $23^{\circ}C$가 높아졌음을 확인하였다. 또한 PPC 나노 조성물의 수분 흡수량은 기존의 PPC에 비해 상당히 감소하였다. 이는 clay의 PPC matrix 구조 내에 존재함으로 인해 수분 흡수를 감소시킨 것으로 해석할 수 있다. 수분 흡수는 코팅 막의 분해를 유발하고 물리적, 기계적 성능에 영향을 미친다. 따라서 나노 조성물로 인한 PPC의 열적 안정성, 수분흡수도 향상은 PPC의 사용과 실제 공정에 중요한 변수로 작용할 수 있다.

• Advances in concrete construction
• /
• 제16권1호
• /
• pp.59-68
• /
• 2023

In the pumping process, concrete moves along the pipe and experiences both pressure and shear. This changes the workability and flow characteristics of the concrete. However, the effect of pressure and shear on the change in properties of concrete during the pumping process has not yet been accurately identified. This study analyzed the effects of pressure and shear on the properties of concrete during pumping. For quantitative tests, lab-scale test equipment capable of simulating the pressure and shear applied to concrete during pumping was used. For one coarse aggregate type, two paste types, three mortar types, and five concrete types, the effects of pressure, shear, and shear under pressure conditions were examined by varying the maximum pressure (0 to 200 bar) and the rotational speed of the vane for shear (0 to 180 rpm). Under the maximum pressure condition of 200 bar, the water absorption of coarse aggregate increased by 0.62% and that of fine aggregate also increased. When the concrete was under pressure, significant changes (a reduction in a slump and an increase in viscosity and yield stress) compared with the effect of the elapsed time occurred owing to an increase in the water absorption of the aggregates. When both pressure and shear were applied to concrete, both the slump and viscosity decreased. As the rotational speed of the vane increased, changes in properties became significant. Shearing in the absence of pressure maintained the properties of concrete. However, shearing under pressure conditions caused a reduction in slump and viscosity.

• 한국의류학회지
• /
• 제23권6호
• /
• pp.800-808
• /
• 1999

The demand for PU coated synthetic leather is increasing as a high fashion material. But it has some faults of water vapor permeability surface tacky property and static electricity. Therefore the purpose of this study was the produce of PU coated fabric added collagen with hydrophilic property and soft touch. In the PU coated fabric water vapor permeability water vaper absorption and frictional electronic voltage were investigated surface bending and compression properties were also examined by the use of KES-FB System. The followings were the results of this study. 1. There was no Cr in the collagen so that Cr was not treated in the collagen. 2. The surface and cross sectional layer of PU coated fabric with collagen were highly developed by micro porous structure. 3. The water vapor permeability of PU coated fabric was increased as collagen concentration increased. 4. The water vapor absorption of PU coated fabric was increased as collagen concentration increased. 5. The frictional electronic voltage of PU coated fabric was decreased in accordance with the increase of collagen concentration. Especially it effectively decreased by the use of only 5% collagen concentration. 6,. The bending and compression properties of PU coated fabric were increased in accordance with the increase of collagen concentration so that it became stiff. 7. The Value of MIU, SMD was decreased in accordance with the increase of collagen concentration so that the PU coated fabric became smooth.

• 한국의류학회지
• /
• 제14권3호
• /
• pp.229-240
• /
• 1990

The purpose of this study was to investigate the effect of hydrophilicity of the fiber on the water vapor transport properties of the fabric by using double layered fabrics of natural and synthetic fibers such as cotton, wool, nylon, dacron, orlon and polypropylene. Wickability and absorption rate were measured to determine the absorbancy of the fabrics. Dynamic and steady state water vapor transport properties were measured by cobaltous chloride method and evaporation method, respectively. Absorption was in the order of orlon> cotton > wool > nylon > polypropylene > dacron. Dynamic surface wetness of synthetic fabrics were faster than that of natural fabrics. For the double layered fabrics, higher water vapor transport was resulted when the natural fabric was exposed to lower vapor pressure and synthetic fabric was exposed to higher vapor pressure than when the fabrics were layered the other way around. Opposite result was obtained for orlon, which suggested that when the fabric of high absorbancy is exposed to the environment and lower absorbancy is to the skin, higher water vapor transpont could be resulted.

• 한국자원식물학회지
• /
• 제11권3호
• /
• pp.272-278
• /
• 1998

This study was carried out to investigate the functional properties such as nitrogen solubility, emulsifying property , foaming capapcity , water and oil absorption of Camellia (Camellia japonica .) seed protein isolate in condition of distilled water and 0.5M NaCl solution at pH 2.0∼10.0. Nitrogen solubility of Camellia protein isolate in distilled water showed the minimum value at pH 4.0 and increased at pH lower or higher than the isoelectric point(pH 4.0). It was 90.0 %at pH 10.0 Nitrogen solubility of 0.5M NaCl solution showed a similar pattern with that of distrille dwater but was higher than that of distilled water except pH 2.0 and pH 10.0. Emulsifying activity of Camellia seed protein islate showed the minimum value at pH 4.0, but was higher at ether value of pH. Emulsifying stability of protein isolate was stable by heat treatment for 30min, at 80℃ and increased in 0.5M NaCl solution more than that of distille dwater. Foaming capacity of Camellia seed protein isolate in distill3ed water showed the minimum value near the isoelectric point, While it changed little at other values of pH. Foaming stability slowly decreased as, but didn't make a significant difference as time was delayed . Oil absorption was 1.4ml per a sample of 1g and water absorption was 0.9ml per a sample of 1g. The former was higher than the latter . The content of total amino acid of Camellia protein isolate was 43.67% and the major total amino acid of Camellia protein isolate was 43.67% and the major total amino acid was in the order of glutamic acid , arginine, aspartic acid, and leucine.

• Journal of the Korean Wood Science and Technology
• /
• 제38권4호
• /
• pp.298-305
• /
• 2010

본 연구에서는 목분 첨가된 폴리프로필렌 복합재의 수분흡수 특성에 목재수종, 화학조성분, 충진제 함량, 입자크기 및 상용화제의 첨가가 미치는 영향에 관해서 알아보았다. 500, 1,000, 1,500, 2,000, 2,500 및 3,000 시간 동안 물에 침지시킨 후, 상수리나무(Quercus accutisima Carr.)와 다릅나무(Maackia amuresis Rupr. et Maxim)는 낙엽송(Larix kaempferi Lamb.)에 비하여 훨씬 낮은 물흡수도를 보였다. 모든 수종에서 목분의 함량이 10 wt%로부터 50 wt%까지 증가할수록, 주어진 시간동안 물에 침지시켰을 때 복합재의 수분흡수율이 증가하 였다. 목분의 입자크기는 복합재의 수분흡수율에 큰 영향을 주는 것으로 나타났다. 상용화제의 첨가는 복합재의 수분흡수율을 낮추는데 아주 효과적이다. 가장 낮은 수분흡수율은 다릅나무 목분을 이용하고, 목분의 함량이 낮을수록, 목분의 입자크기가 작을수록, 그리고 상용화제를 첨가했을 때 얻을 수 있다. 복합재의 두께팽창은 수분흡수율과 아주 높은 상관관계를 가지고 있다.

• 접착 및 계면
• /
• 제13권3호
• /
• pp.121-130
• /
• 2012

본 연구에서는 대나무섬유의 분쇄 유 무에 따라 섬유함량이 각각 30, 40, 50 wt%인 대나무/PLA 펠렛을 압출공정으로 제조하고 사출공정을 통해 대나무/PLA 바이오복합재료를 성형하여 그들의 기계적, 열적, 충격 특성과 수분흡수성을 조사하였다. 대나무/PLA 바이오복합재료의 굴곡탄성률, 인장탄성률, 저장탄성률 및 충격강도는 neat PLA에 비하여 두드러지게 증가되었다. 특히 탄성률은 분쇄된 대나무섬유의 도입에 의하여 더욱 증가하였다. 또한 분쇄한 대나무섬유의 사용이 바이오복합재료의 장시간 동안 측정한 수분에 대한 저항성 증가에 효과적이었다. 대나무섬유의 사용이 neat PLA의 열변형온도를 약 16% 향상시키는 효과를 나타내었으나, 분쇄된 대나무섬유의 사용에 의한 증가는 미미하였다. 분쇄된 대나무섬유의 사용은 바이오복합재료의 인장강도와 충격강도에는 크게 영향을 주지 않았다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 가을 학술발표회 논문집
• /
• pp.375-380
• /
• 1997

The purpose of this study is to examine the properties of polymer-modified mortars using asphalt emulsion. The polymer-modified mortars using asphalt emulsion with various asphalt-cement ratios are prepared, and tested for flexural and compressive strengths, water absorption and permeability, carbonation, Cl ion penetration and chemical resistance. From the test results, the flexural and compressive strengths, water absorption and permeability, carbonation and Cl ion penetration depths of polymer-modified mortars using asphalt emulsion tend to be decreased with increasing asphalt-cement ratio, and chemical resistance is improved. It is evident that polymer-modified mortars using asphalt emulsion having an excellent properties as a waterproof and finish materials can be produced.