• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.870-873
• /
• 2014

Green roof systems has widely been used on rooftop of buildings by considering environmental benefits in aspects of bio-diversity, storm-water runoff as well as noise reduction. To predict noise reduction effect by green roof systems, it is necessary to measure in-situ acoustical properties of the components by devices enabling in-situ measurements. In this study, Micro-flown, which is the state of the arts device to measure in-situ normalized impedance and absorption coefficient has been used to measure acoustical properties of green roof materials according to different water saturation condition in the materials.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2002년도 학술논문발표회
• /
• pp.31-36
• /
• 2002

Recently, more interests in surface treatment of structure with water repellent agent are steadily increased, But, investigation of its properties such as protection, durability, morphology of micro structure is not sufficient. Therefore, This paper is aimed for the investigation of water repellent property and change of morphology of micro pores in mortar that is treated by water repellent agent(Inorganic polymer based material). Water repellent property, water absorption coefficient, air permeability, porosity and the observation of micro structure was investigated in different water repellent agent type. The test results indicated that water repellent treated mortar showed low absorption coefficient and air permeability(breathing effect). This is why inorganic polymer is coated at the wall of capillary and micro pores, also, the volume of micro pore is reduced without the change of morphology in micro structure.

• 수산해양기술연구
• /
• 제14권1호
• /
• pp.37-41
• /
• 1978

Optical properties were studied in the costal waters of the southern part of Korea based on twenty oceanographic stations from 1 st to 9 th February, 1977. Submarine daylight intensity was measured by using an underwater luxmeter (Toshiba No.9). Daylight intensity in the upper 30m depth layer was measured at 1 m depth interval. The absorption coefficient of the sea water in the area ranged from 0.101 to 2.539 (mean 0.578). The Secchi-disc depth in the area ranged from 0.8 to 13 meters (mean 5.33 meters). The relationship between absorption coefficient (K) and transparency (D) was k= 1. 704/ D. The mean water color in the area was 5. 75 (3-9) in Forel scales. The rates of light penetration for daylight at 1m layer in the area ranged from 13.18 to 82. 05% and the mean was 59.56%, while the rate at 5m layer ranged from 0.007 to 46.1% and the mean was 18.47%.

• 동아시아식생활학회지
• /
• 제2권2호
• /
• pp.277-282
• /
• 1992

This study was designedto investigate changes in phsicochemical properties of rice extrudate with added glycerin fatty acid ester extruded by single screw extruder. According to emulsifier content, expansion ratio and water solubility index were represented minimum in rice extrudate with added 2.0% and 2.5% glycerin fatty acid ester. Extrudate with added 1.5% emulsifier revealed lowest break strength and bulk density, so got a tender and light texture. Meanwhile water absorption index was showed maximum at 1.5% emulsifier content. As emulsifier content increased, lightness raised. By the microstructure obsorved with image analyzer, addition of emulsifier had decreased area and fractarea of air cells of cross section of extrudates. On the results of this research, quality of extrudate with added 1.5% glycerin fatty acid ester was considered very well than 100% rice extrudate, because of tender and light texture, highest water absorption indexand fine structure with higher lightness.

• Advances in concrete construction
• /
• 제5권5호
• /
• pp.437-450
• /
• 2017

The present work investigates about the development of a novel construction material by utilizing Granulated Blast Furnace Slag (GBS), an industrial waste product, as substitution of natural fine aggregates. For this, experimental work has been carried out to determine the influence of GBS on the properties of concrete such as compressive strength (CS), modulus of elasticity, ultrasonic pulse velocity (UPV), chloride penetration, water absorption (WA) volume of voids (VV) and density. Concrete mixes of water/cement (w/c) ratios 0.45 and 0.5, and incorporating 20%, 40% and 60% of GBS as partial replacement of natural fine aggregate (sand) are designed for this study. The results of the experimental investigation depict that CS of concrete mixes increases with the increasing percentages of GBS. Moreover, the decrease in chloride penetration, WA and VV, and improvement in the modulus of elasticity, UPV, density of concrete is reported with the increasing percentage of GBS in concrete.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.803-806
• /
• 2005

The effect of coating method and binder content on the tensile adhesion strength, water absorption and cl- penetration depth of polymer-modified pastes using redispersible polymer powders and ceramic powder are examined. As a result, the tensile adhesion strength of the polymer-modified pastes tend to increase with increasing binder content and: number of coating. The water absorption and cl- penetration depth of the polymer-modified pastes tend to decrease with increasing binder content and number of coating.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.1007-1008
• /
• 2011

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2005년도 학술발표논문집
• /
• pp.128-134
• /
• 2005

This study was performed to evaluate the strength and durability properties of recycled concrete containing water - redispersible copolymer powder(WRP) and blast furnace slag powder(BSP) [RCWS]. Material used were cemente, recycled coarse aggregare, natural fine aggregate, water-redispersible copolymer powder, blast-furnace slag powder. Especially, Water-redispersible powder was used for blending with Inorganic binders such as cemente, gypsum and hydrated lime etc. First of all, Mixed ratio method of RCWS made Two Type. One was called type-1 which used to BSP content 5% and WRP(Water-redispersible powder) content 0%, 1%, 2%, 3%, 4%, 5%, 6%. respectively. Another was called Type-2 which used to BSP(blast furnace slag powder)content 10% and WRP(Water-redispersible powder) content 0%, 1%, 2%, 3%, 4%, 5%, 6%. respectively. According to the experimental results of (RCWS), Incase Type-2 at curing age 28days, Compressive strength, pulse velocity and dynamic modulous of elasticity were shown higher than Type-1 and The more WRP content increasing($0%{\sim}6%$) was the lower Compressive strength, Pulse velocity and Dynamic modulous of elasticity. Water absorption ratio was in the range of $3.85%\;{\sim}\;3.23%$, it was almost equal to Type-1, 2 but Increasing the WRP content($0%{\sim}6%$), The water absorption ratio is decreased.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2000년도 추계학술발표강연 및 논문개요집
• /
• pp.92-93
• /
• 2000

• 비파괴검사학회지
• /
• 제34권2호
• /
• pp.155-164
• /
• 2014

탄소섬유강화 복합재료(carbon fiber reinforced plastics; 이하 CFRP)는 금속재료에 비해 중량이 가벼우면서도 비강도와 비강성이 높은 재료로 항공기, 자동차, 선박 등의 다양한 분야에서 적용이 증가하고 있다. CFRP는 정적부하에 대해서는 우수한 역학적 특성을 가진 반면에 고온 다습한 환경에서는 우수한 역학적 특성을 기대할 수 없고, 복합재료의 유용한 기계적 성질이 장시간 주위 환경에 놓여 있어도 충분히 유지되어야 하지만 온도, 습도 등과 같은 환경적 요인으로 수분이 복합재료 내로 침투하여 기지의 분자 배열 및 화학적 성질을 변화시키고 복합재료의 계면 특성 및 구성 재질의 기계적 성질을 저하시킨다. 항공기의 경우 운항 시에 CFRP가 고온 다습한 환경조건에 장시간 노출되게 되면 CFRP 내부로 수분이 흡수되게 되는데 CFRP 내부에 흡수된 수분은 체적팽창을 야기시키고 내부 응력상태를 변화시킬 뿐만 아니라 섬유와 기지의 화학적 결합을 분리시킴으로써 접합강도를 급격히 저하시키게 된다. 따라서 CFRP를 사용하는 항공기의 구조 건전성 확보를 위하여 실제 환경에서의 특성 변화를 연구할 필요가 있다. 본 연구에서는 공기결합 초음파탐상검사(air coupled ultrasonic testing; 이하 ACUT) 시스템을 이용하여 흡습된 CFRP의 비파괴적 특성을 평가하고자 하였다. CFRP 시험편을 직접 제작한 후 고온다습한 환경을 설정하기 위해 항온수조를 이용하여 $75^{\circ}C$의 증류수에 30일, 60일, 120일간 침지하였고, ACUT를 이용하여 흡습에 의한 CFRP 시험편의 특성 변화를 초음파 C-scan 이미지와 흡습 전과 후의 신호의 전파시간 변화를 통해 초음파 신호 특성 변화를 고찰하였다. 또한 전단강도 평가를 통해 흡습에 의한 기계적 특성 변화를 실험적으로 검증하였다.