• 한국염색가공학회지
• /
• 제13권5호
• /
• pp.18-18
• /
• 2001

Natural colorants have attracted much attention all over the world because of their non-hazardous nature. The world is becoming increasingly aware of environmental issues, such as ozone layer depletion, water pollution and waste disposal problems. The use of synthetic dyestuffs for their synthesis and application in the dyeing industries has been criticized due to introduction of contaminants into the environment. This has led to the desire to turn to the traditional, and more natural way of life. In this study, the colorants of extract of Ginkgo biloba bark were analysed and their dyeing properties on silk, wool and cotton were studied. It was found that uv-visible absorption spectra of extract of Ginkgo biloba bark showed two strong absorption peaks in the range of 240∼400 nm. From the result of IR spectra, the major ingredient of extract of Ginkgo biloba bark seems to be the flavon which is one of the flavonoid derivatives. Silk, wool, and cotton dyed with the extract of Ginkgo biloba bark showed a reddish yellow color. Their color differences were increased drastically with repetition of dyeing by three times.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 춘계학술대회 논문집
• /
• pp.760-765
• /
• 2013

Eco-friendly material applied to building would be one of the materials which is must developed for global environmental conservation and reduction of carbon dioxide. For development of eco-friendly material, a cellulose sound-absorbing material has been developed with waste paper through adjustment of various mix proportions. The developed cellulose sound-absorbing material has been tested for its acoustic properties such as acoustic absorptivity and dynamic elastic modulus. The absorptivity was evaluated by developing six samples and using impedance tube and reverberation chamber. As a result of the evaluation, 0.64(NRC) was secured in absorptivity and $4.7MN/m^3$ was indicated in dynamic elastic modulus. Also, for practical use of developed sound-absorbing material as inner heartwood in drywall, comparison test of sound reduction index was performed with existing glass wool sound-absorbing material and constructed drywall of gybsum board. The results have shown 55dB(Rw) of sound reduction index in glass-wool wall and 46dB(Rw) in cellulose.

• 한국소음진동공학회논문집
• /
• 제23권5호
• /
• pp.456-462
• /
• 2013

Eco-friendly material applied to building would be one of the materials which is must developed for global environmental conservation and reduction of carbon dioxide. For development of eco-friendly material, a cellulose absorber has been developed with waste paper through adjustment of various mix proportions. The developed cellulose absorber has been tested for its acoustic properties such as absorption coefficient and dynamic stiffness. The absorption coefficient was evaluated by developing six samples and using impedance tube and reverberation chamber. As a result of the evaluation, 0.64(NRC) was secured in absorption coefficient and 4.7 $MN/m^3$ was indicated in dynamic stiffness. Also, for practical use of developed absorbers as inner heartwood in drywall, comparison test of sound reduction index was performed with existing glass wool absorbers and constructed drywall of gypsum board. The results have shown 55 dB(Rw) of sound reduction index in glass-wool wall and 46 dB(Rw) in cellulose.

• 한국잠사곤충학회지
• /
• 제43권1호
• /
• pp.41-48
• /
• 2001

The purification, dissolution and powdering of stained waste silk obtained from weaving and dyeing process were studied for the surface modification of textile fabric and plastic materials. The whiteness of stained waste silk could be improved through degumming and bleaching with sodium hydrosulfite. The water-soluble fibroin solution can be obtained by dissoving the degummed waste silk in a boiling solution of 50% calcium chloride for 60 minutes. The salts and heavy metals contained in fibroin solution were removed by electric dialysis, wool fiber filtration and gel filtration chromatography. The fibroin powder was prepared by using a fine grinder after the alkali treatment for weakening the silk fiber. The fine fibroin powder of particle size around 30 ㎛ was obtained with a ultra fine-mill, while it was finer below 10 ㎛ with a ball-mill. The dissolved or powdered silk was applied to the surface of fabric with addition of the binder (a urethane resin). The moisture content of polyester and nylon fabrics treated with the silk solution was improved due to hygroscopic property of silk. The fine fibroin powder mixed with the binder ws coated on the surface of synthetic film by use of the air pressed sprayer. It was revealed that the hygroscopicity as well as the softness of fibroin powder coated film was much improved. Therefore, it is thought that the fine silk fibroin powder is applicable as an coating agent for the surface modification of plastic and synthetic leather.

• 한국염색가공학회지
• /
• 제29권2호
• /
• pp.62-68
• /
• 2017

Coffee sludge and onion shells are known typically as waste resources as well as simultaneously being the raw material for dye having a golden brown color. This research studies the dyeability, functionality, and colors of woolen fabric after being dyed by different dyeing method using coffee sludge and onion shells extract. The woolen fabric was refined and pre-mordanted with tannin. The dyeing process conducted was single-dye, using coffee sludge and onion shells extract, sequential multi-dye, consecutively dyeing with coffee sludge and onion shells, and mixed-dye, blending coffee sludge extract and onion shells extract to dye. The dyeing was measured on the surface color, color fastness, and UV-protection ability. As a result, the expression of various hues of tan using coffee sludge and onion shells extract were shown to be possible. Additionally, single-dye, sequential multi-dye, mixed-dye had generally superiority in color fastness to light, all rating 3 and color fastness to washing, rating 3 or 4, showing relatively stable color fastness to washing. The UV protection ability was shown to be better, especially appearing satisfactory in the UV-B protection, all measured to be over 90%.

• 한국산학기술학회논문지
• /
• 제7권5호
• /
• pp.935-939
• /
• 2006

The environmentally benign inorganic bacterioide was developed by using waste shell as a matrix and its efficacies against various bacteria were examined in this investigation. The inorganic bacteriocide inhibited strongly the growths of various bacteria such as S. aureus and E.coli. The inorganic bacteriocide also showed strong killing effect on the growth of P.acnes which causes the acne on human face. Moreover, this bacteriocide inhibited the activity of lipoxygenase prominently, indicating notable anti-inflammatory activity of the bacteriocide.

• 한국잠사곤충학회지
• /
• 제41권3호
• /
• pp.205-210
• /
• 1999

Silk nonwoven fabrics are prepared by needle punching and thermal bonding with silk waste. To enhance the carding efficiency, the degumming rate was controlled with sodium hydrogen sulfite solution. The amount of the remained sericin was 3%(S-3), and 6%(S-6). Mixing wool and LMP(Low melting polyester) with the silk, to improve carding efficiency, was also effective. Following items were tested with prepared silk nonwovon fabrics : weight, thickness, compression, tensile strength, heat insulation, water absorption, and deodorization. The results show that the silk nonwoven fabrics could be used for apparels and new biomaterials.

• 한국수소및신에너지학회논문집
• /
• 제31권2호
• /
• pp.169-176
• /
• 2020

There is a growing interest in hydrogen energy utilization since an alternative energy development has been demanded due to the depletion of fossil fuels. Hydrogen is produced by the reforming reaction of natural gas and biogas, and the electrolysis of water. An solid oxide electrolyte cell (SOEC) is reversible system that generates hydrogen by electrolyzing the superheated steam or producing the electricity from a fuel cell by hydrogen. If the water can be converted into steam by waste heat from other processes it is more efficient for high-temperature electrolysis to convert steam directly. The reasons are based upon the more favorable thermodynamic and electrochemical kinetic conditions for the reaction. In the present study, steam at over 180℃ and 3.4 bars generated from a boiler were converted into superheated steam at over 700℃ and 3 bars using a cylindrical steam superheater as well as the waste heat of the exhaust gas at 900℃ from a solid refuse fuel combustor. Superheated steam at over 700℃ was then supplied to a high-temperature SOEC to increase the hydrogen production efficiency of water electrolysis. Computational fluid dynamics (CFD) analysis was conducted on the effects of the number of 90° elbow connector for piping, insulation types and insulation layers of pipe on the exit temperature using a commercial Fluent simulator. For two pre-heater injection method of steam inlet and ceramic wool insulation of 100 mm thickness, the highest inlet temperature of SOEC was 744℃ at 5.9 bar.

• Korean Chemical Engineering Research
• /
• 제48권3호
• /
• pp.391-396
• /
• 2010

본 연구에서는 퇴비공장 또는 공공시설에서 발생되는 악취폐가스의 대표적인 제거대상 오염원인 암모니아의 효율적 처리를 위하여, 여러 운전 조건 하에서 동 부피의 폐타이어담체와 compost를 충전하고 반송슬러지를 고정한 바이오필터의 암모니아 제거 특성을 조사하고 바이오필터공정의 적정운전조건을 구축하였다. 암모니아를 함유한 폐가스의 처리를 위하여 바이오필터를 30일(2회/1일의 회수로 총 60회 실험) 동안 약 $30^{\circ}C$의 온도조건 하에서 암모니아부하를 $2.18g-N/m^3/h$부터 $70g-N/m^3/h$ 까지 증가시키면서 운전하였다. 바이오필터를 가동하여 I부터 IV 단계까지는 암모니아 제거율이 거의 100%로서, 암모니아부하가 $17g-N/m^3/h$에 이르기까지 거의 모든 암모니아가 제거되었으나, 바이오필터 운전 V 단계에서 암모니아부하를 약 $35g-N/m^3/h$로 증가시켰을 때에 암모니아제거율은 약 80% 정도로 급락하여 암모니아 제거용량이 약 $28g-N/m^3/h$이었다. 그러나 바이오필터 운전 VI 단계에서 암모니아부하를 약 $70g-N/m^3/h$로 두 배로 증가시켰을 때에도 암모니아제거율은 80%를 유지하여 최대암모니아 제거용량이 약 $55g-N/m^3/h$에 달하였다. 이와 같이 본 연구의 최대 암모니아 제거용량은, 분뇨슬러지를 유기담체인 rock wool에 접종하고 Kim 등에 의하여 수행된 바이오필터실험의 최대 암모니아 제거용량인 $1,200g-N/m^3/day$(i.e., $50g-N/m^3/h$)보다 다소 우월하였다. 그러나 본 연구의 암모니아 질소 임계부하는 Kim 등에 의하여 수행된 바이오필터실험의 암모니아 질소의 임계부하인 $810g-N/m^3/day$(i.e., $33.75g-N/m^3/h$)에 미치지 못하였다. 본 연구의 최대 암모니아 제거용량이 Kim 등보다 우월한 이유는 Kim 등에 의하여 사용된 미생물담체보다 본 연구에서 사용한 미생물담체인 폐타이어담체의 코코넛 활성탄분말로 도포된 표면 및 발달된 내부공극이 각각 질산화 및 탈질 미생물이 고정화되기 더욱 쉬운 환경을 제공하기 때문이라고 사료된다.

• 복식문화연구
• /
• 제6권2호
• /
• pp.163-180
• /
• 1998

The purpose of this study is to investigate the main characteristics of the environment-friendly design expressed in Koran fashion. Environment-friendly design can be categorized into choice of material, extension of products life cycle, and recycling design. In this study, Korean fashion designers can be found having the conciousness of environment for fashion design since 1990. First, in choice of material, the designers used Natural fibers which are cotton, linen, wool, and etc, and used natural dyes. Some of the designers have moved from using real fur to using fake fur for animal welfare. But fake furs produced from synthetic or regenerated fibers have the environmental problems during textile production processes. Some of the designers used fake leather made from the skins of an edible fish which are otherwise going to waste. Secondly, Design for extension of products life cycle can economize the resources and energy. Design for extension of products life cycle are classified into reversible clothing, many function clothing, modular style, patina clothing, simple style, and layered look. Finally, recycling design are classified into recycling of daily necessaries and expression techniques of recycling design which are designer's works used patchwork, mash techniques, and handmade of knits or buttonhole stitch.