• Steel and Composite Structures
• /
• 제46권5호
• /
• pp.689-707
• /
• 2023

Geopolymer concrete production is interesting as it is an alternative to portland cement concrete. However, workability, setting time and strength expectations limit the sustainable application of geopolymer concrete in practice. This study aims to improve the production of geopolymer concrete to mitigate these drawbacks. The improvement in the workability and setting time were achieved with the additional use of NaOH solution whereas an increase in the strength was gained with the addition of recycled steel fibers from waste tires. In addition, the use of 25% basalt powder instead of fly ash and the addition of recycled steel fibers from waste tires improved its environmental feature. The samples with steel fiber ratios ranging between 0.5% and 5% and basalt powder of 25%, 50% and 75% were tested under both compressive and flexure forces. The compressive and flexural capacities were significantly enhanced by utilizing recycled steel fibers from waste tires. However, decreases in these capacities were detected as the basalt powder ratio increased. In general, as the waste wire ratio increased, the compressive strength gradually increased. While the compressive strength of the reference sample was 26 MPa, when the wire ratio was 5%, the compressive strength increased up to 53 MPa. With the addition of 75% basalt powder, the compressive strength decreases by 60%, but when the 3% wire ratio is reached, the compressive strength is obtained as in the reference sample. In the sample group to which 25% basalt powder was added, the flexural strength increased by 97% when the waste wire addition rate was 5%. In addition, while the energy absorption capacity was 0.66 kN in the reference sample, it increased to 12.33 kN with the addition of 5% wire. The production phase revealed that basalt powder and waste steel wire had a significant impact on the workability and setting time. Furthermore, SEM analyses were performed.

• 공업화학
• /
• 제20권2호
• /
• pp.223-226
• /
• 2009

본 연구에서는 기존 소각방법의 단점을 보완할 수 있는 열분해를 통해 폐전선을 처리하고 부가적으로 생성되는 구리 및 합성연료유의 회수를 그 목적으로 하고 있다. 폐전선의 열분해 공정을 거쳐 구리를 회수하고 쉽게 오일로 분해될 뿐 아니라 오일의 유용성이 매우 크기 때문에 아주 고가의 유효자원을 회수할 수 있다. 폐전선 열분해를 위한 최적 온도를 결정하기 위하여 350, 450, $550^{\circ}C$에서 열분해를 실행하였다. $700^{\circ}C$까지 TG/DTA를 실행하였으며 온도상승률은 분당 $5^{\circ}C$로 하였다. 그 결과 PVC의 염화수소제거를 위한 최적 온도 범위가 PE나 PP보다 낮은 영역인 $280{\sim}350^{\circ}C$임을 보였다. 실질적으로 폐전선으로부터 95% 이상의 구리금속과 발열량이 8027 kcal/kg인 합성연료유를 회수할 수 있었다.

• 한국환경과학회지
• /
• 제24권2호
• /
• pp.237-244
• /
• 2015

This objectives of research are to figure out combustion characteristics with increasing temperature with petrochemical sludge by adding wasted organic matters which are waste electric wire, anthracite coal and sawdust, and to exam heating value and ignition temperature for using refused derived fuels(RDFs). After analyzing TGA/DTG, petrochemical sludge shows a rapid weight reduction by vaporing of inner moisture after $170^{\circ}C$. Gross weight reduction rate, ignition temperature and combustion rates represent 68.6%, $221.9^{\circ}C$ and 54.1%, respectively. In order to assess the validity of the RDFs, the petrochemical sludge by adding wasted organic matters which are waste electric wire, anthracite coal and waste sawdust. The materials are mixed with 7:3(petrochemical sludge : organic matters)(wt%), and it analyzes after below 10% of moisture content. The ignition temperatures and combustion rates of the waste electric wire, anthracite coal and waste sawdust are $410.6^{\circ}C$, $596.1^{\circ}C$ and $284.1^{\circ}C$, and 85.6%, 30.7% and 88.8% respectively. In heating values, petrochemical sludge is 3,600 kcal/kg. And the heating values of mixed sludge (adding 30% of the waste electric wire, anthracite coal and waste sawdust) each increase up to 4,600 kcal/kg, 4,100 kcal/kg and 4,300 kcal/kg. It improves the ignition temperatures and combustion rates by mixing petrochemical sludge and organic matters. It is considered that the production of RDFs is sufficiently possible by using of petrochemical sludge by mixing wasted organic matters.

• 환경위생공학
• /
• 제15권2호
• /
• pp.34-40
• /
• 2000

In the tungsten industry, molybdenum wire which used as the center supporter for coil shape tungsten wire was removed. Nitric acid dissolution method which used prevalently up to the present, takes nitric acid as major component and use noxious material such as sulfuric acid and hydrochloric acid remove molybdenum wire which used as center supporter by dissolve selectively within the range of no damage on tungsten wire. Mixed acid waste water occurred to the process were difficult to be decomposed by the conventional methords. This mixed acid waste water was treated by ozone, and It was obtained using possible by-product through the treatment waste water. For the three reactors with the same volume ; Blank reactor, Disturbance plate reactor, Packed-bed reactor ; the results were as follows : For the blank reactor COD removal efficiency in the pH = 4 (HRT : 6hr) was 28.5%, COD removal efficiency in the pH = 7 (HRT : 6hr) was 28.6%, and COD removal efficiency in the pH = 10 (HRT : 6hr) was 27.8%. For the disturbance plate reactor COD removal efficiency in the pH = 4 (HRT : 6Min.) was 86.5%, COD removal efficiency in the pH =7 (HRT : 6Min.) was 84.4%, and COD removal efficiency in the pH = 10 (HRT : 60Min.) was 86.8%. For the packed-bed reactor COD removal efficiency in the pH = 4 (HRT : 40Min.) was 76.0%, COD removal efficiency in the pH = 7 (HRT : 40Min.) was 81.3%, and COD removal efficiency in the pH = 10 (HRT : 40Min.) was 84.6%. After O3 treatment using possible by-product(Na2SO4) was 150g/ℓ.

• Steel and Composite Structures
• /
• 제45권5호
• /
• pp.653-663
• /
• 2022

This study reports the results of a series of tests of pultruded glass fiber reinforced polymer (P-GFRP) box section composite profile columns, geometrically similar with/without concrete core, containing 0-1-2-3% steel fiber, with different lengths. The recycled steel wires were obtained from waste tyres. The effects of steel fiber ratio on the collapse and size effect of concrete filled P-GFRP columns under axial pressure were investigated experimentally and analytically. A total of 36 columns were tested under compression. The presence of pultruded profile and steel wire ratio were selected as the primary variable. The capacity of pultruded profiles with infilled concrete are averagely 9.3 times higher than the capacity of concrete without pultruded profile. The capacity of pultruded profiles with infilled concrete are averagely 34% higher than that of the pultruded profiles without infilled concrete. The effects of steel wire ratio are more pronounced in slender columns which exhibit buckling behavior. Moreover, the proposed analytical approach to calculate the capacity of P-GFRP columns successfully predicted the experimental findings in terms of both pure axial and buckling capacity.

• 한국안전학회지
• /
• 제18권4호
• /
• pp.35-38
• /
• 2003

The wire rope, one of the component of the elevator, is extremely important for the sage operation of the elevator. That is why the wire rope is replaced at a specific interval regradless of the operating conditions or the degree of damage to prevent the breakage of the wire rope. This is the waste of resources, causing economic and environmental loss. This paper has surveyed and analyzed and analyzed the status of replacing wire-rope by buildings that use elevators, in order to compare the replacement cycles of the wire rope under each operating conditions.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2004년도 학술논문집
• /
• pp.306-315
• /
• 2004

MSM의 결점인 접근 지역의 제한을 극복하기 위해 차세대관리 공정장치 유지보수용 천장이동 서보 매니퓰레이터(Bridge Transported Servo Manipulator, BTSM) 시제품을 개발하였다. 시제품은 부분적으로 와이어 구동방식을 채택한 단일 팔 형태의 힘반영 마스터-슬레이브 서보 매니퓰레이터로 중량 및 규모에 비해 취급하중이 기존 마스터-슬레이브 서보 매니퓰레이터 보다 크다. 와이어 구동 메카니즘은 한 축이 움직일 때 다른 축도 영향을 받을 수 있다. 본 논문에서는 이의 현상을 극복하기 위해 와이어 길이 변화에 대한 관계식을 유도하였으며, 실험을 통해서 검증하였다.

• 자원리싸이클링
• /
• 제22권5호
• /
• pp.63-70
• /
• 2013

국내의 한국전력망 또는 민간 산업공장에서는 노후선로 교체 또는 부하 증가에 의한 송전용량 증대를 위한 가공전선 교체 작업으로 인하여 매년 수백 톤의 폐가공전선이 발생되고 있는 실정이다. 최근 경제적인 측면과 환경적인 측면, 효율성에 관한 측면에서 전선의 재활용 기술이 폭넓게 연구되고 있다. 본 연구에서는 폐전선의 재활용 기술에 대한 특허와 논문을 분석하였다. 분석범위는 1975년 ~ 2011년까지의 미국, 유럽연합, 일본, 한국의 등록/공개된 특허와 SCI 논문으로 제한하였다. 특허와 논문은 키워드를 사용하여 수집하였고, 기술의 정의에 의해 필터링 하였다. 특허와 논문의 동향은 연도, 국가, 기업, 기술에 따라 분석하여 나타내 보았다.

• Journal of Electrical Engineering and Technology
• /
• 제9권1호
• /
• pp.239-246
• /
• 2014

Incineration is conceptually sound as a waste treatment technology. There is, however, concern over its emissions when it is improperly designed and operated. An electrostatic precipitator is one of the most commonly used devices to control particulate emissions from boilers, incinerators and some other industrial processes. In this work, a modular electrostatic precipitator with sizing of $1m{\times}1m{\times}1m$ was developed for removal of particulate matter from the exhaust gases of a small waste incinerator. Its design was based on a simple wire-and-plate concept. The corona discharge wires were connected to a positive high-voltage pulse generator, while the collection plates were grounded. The high-voltage pulse generator was used to produce the corona discharge field between the individual discharge wire and the collection plate. The particulate-laden exhaust gas flow was directed across the corona discharge field. The charged particles were deflected outward and collected on the plate. The collection efficiency was evaluated as a mass loading ratio between the difference at the inlet and the outlet to the particulate loading at the inlet of the precipitator. The collection efficiency of this modular electrostatic precipitator design was approximately 80 %.

• 한국지반공학회논문집
• /
• 제33권7호
• /
• pp.55-64
• /
• 2017

심층 처분방식은 고준위폐기물을 처분하기 위한 가장 적합한 대안으로 고려되어지고 있다. 심층 처분시설은 지하 500~1,000m 깊이의 암반층에 설치되며 심층 처분시스템의 구성 요소로는 처분용기, 완충재, 뒷채움 및 근계 암반이 있다. 이 중 완충재는 심층 처분시스템에 있어 매우 중요한 역할을 한다. 완충재는 지하수 유입으로부터 처분용기를 보호하고, 방사성 핵종 유출을 저지한다. 처분용기에서 발생하는 고온의 열량이 완충재로 전파되기에 완충재의 열적 성능은 처분시스템의 안정성 평가에 매우 중요하다고 할 수 있다. 따라서 본 연구에서는 국내 경주산 압축 벤토나이트 완충재에 대한 열전도도 추정 모델을 개발하고자 하였다. 압축 벤토나이트 완충재의 열전도도는 비정상 열선법을 이용하여 다양한 함수비와 건조밀도에 따라 측정하였으며, 총 39개의 실험 데이터를 토대로 회귀분석을 이용하여 경주 압축 벤토나이트의 열전도도 추정 모델을 제시하였다.