• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.4
• /
• pp.66-75
• /
• 2015

Disposable diaper waste is consisted of plastic, fiber, and SAP (Super Absorbent Polymer). They are valuable to be used as raw materials of other products including plastic blocks and pulp mold. Nevertheless, disposable diaper waste have been disposed by landfill and incineration without recycling. Due to strict environmental regulations it is necessary to develop fractionation technique to recycle the disposable diaper waste. In this study the fractionation technique using pilot-scale stock preparation units was investigated. Process for separation of plastic and fibers from disposable diaper waste was composed by the combination of pilot-scale pulper, drum screen, screen and cleaner. Recovery rate of plastics and fiber was checked according to the various operating conditions. In drum screen, recovery rate of plastic was high when the cut size of disposable diaper waste was $5cm{\times}5cm$. The highest recovery rate of fiber was achieved with 0.3 mm slot screen. It is important to control the neutral state of SAP for improvement of recovery rate of fiber since SAP can be swelled easily in water. Therefore SAP can be controlled efficiently by the addition of calcium chloride into the pulper. Consequently recovery rates of plastics and fibers were over 90 and 80% under the optimum pilot operating conditions.

• Resources Recycling
• /
• v.18 no.6
• /
• pp.10-17
• /
• 2009

Degradation of the organic component in the waste were carried out by superheated steam in a pressurized vessel. The effects of waste characteristics, reaction temperature and residence time on the degradation rate have been determined. The biodegradable organic components such as food and paper waste have been degraded, and plastics, wood and metal were remained without degradation. The degradation efficiency is decided by the desizing rate of the waste, and the waste mixture with 23% biodegradable organic component shows higher desizing rate than that of the 43% of the biodegradable organic component in a short residence time and the desizing rate is found to be 90% in the maximum condition.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.46 no.2
• /
• pp.34-40
• /
• 2023

As agricultural production increases due to population growth, agricultural by-products that are generated at all production stages increase commensurately. Black soldier fly (BSF) (Hermetia illucens) treatment has potential as an environmentally friendly process to combat the environmental pollution caused by agricultural by-products. This study examined the utilization of BSF larvae in the decomposition of the by-products of apples and mandarins, fruits commonly produced in South Korea. The BSF test larvae were fed apple pomace or mandarin waste, and the control larvae were fed calf feed. Larval weight and size were measured at 4-day intervals until larvae reached the pre-pupal stage. Larval development time, survival rate, and BSF fecundity rate were calculated for all three substrates. Waste reduction and bioconversion ratios were also calculated. The developmental time of larvae fed with apple pomace and mandarin waste was greater than that of the control larvae. The average weight of larvae fed with the fruit by-products was less than that of the control. There was no significant difference in the survival rate of BSF larvae or the fecundity rate of BSF between the substrates used in this study. BSF larvae decomposed 48.0% and 61.5% of apple pomace and mandarin waste, respectively. The bioconversion efficiency rates of BSF larvae fed with apple pomace and mandarin waste were 9.1% and 12.1%, respectively. These results indicated that decomposition of single fruit by-products by BSF larvae is an environmentally friendly and effective bioconversion process.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.10 no.2
• /
• pp.65-70
• /
• 2002

The previous studies showed that rumen microorganisms had an enhanced waste-degrading capability and controlling the dilution rate was very effective in improving acidification efficiency. Generally the composition of food waste has a small deviation value, but one of the waste components (grains, vegetables or meats) can be increased dramatically depending on a seasonal variation. Thus, it is important to evaluate the efficiency of acidogenic fermentation in this case. Each component was spiked to be 80% of the total waste in R1 (grains), R2(vegetables), and R3 (meats). In Rl, rapid degradation occurred during the initial two days. R2 showed similar performance to that of general food waste. In R3, degradation retarded in the initial stage and then increased after controlling the dilution rate. The acidification efficiencies of the reactors were 88.7 (R1), 73.5 (R2), and 62.1% (R3), respectively. Therefore, the fermentation efficiency was kept over 62% regardless of waste components, indicating that it was stable to acidify food waste by employing rumen microorganisms and controlling the dilution rate.

• Korean journal of food and cookery science
• /
• v.16 no.5
• /
• pp.416-424
• /
• 2000

Food waste is inevitable in any institutional food system. Although many factors contribute to plate waste, few quantitative studies of plate waste have actually been carried out. This study was undertaken to check (a) how the service style that affects the amount of plate waste, (b) the difference of plate waste between men and women and, (c) the influence of plate waste and customers'satisfaction to served meal. The survey was conducted through March 15 and April 9, 2000 by weighing the amount of plate waste and by questionnaires. Statistical data analysis was completed using the SPSS-PC program for descriptive analysis and ANOVA test. The results were as follows; (1) The largest amount, plate waste percentage measured were 19% of‘Hot alaska pollack soup’and 18% of‘Kuansh soup’respectively. (2) Amount of leftovers can be reduced if the pre-portioned serving style is changed to self-portioned serving. (3) The main reasons for leaving leftover were‘served too often’and‘disliked food’. (4) The customers'satisfaction rate was highly correlated with the leftover amounts.

• Journal of Korean Society for Atmospheric Environment
• /
• v.26 no.6
• /
• pp.657-665
• /
• 2010

Carbon dioxide ($CO_2$) is known to be a major greenhouse gas partially emitted from waste combustion facilities. According to the greenhouse gas emission inventory in Korea, the quantity of the gas emitted from waste sector in 2005 represents approximately 2.5 percent of all domestic greenhouse gas emission. Currently, the emission rate of greenhouse gas from the waste sector is relatively constant partly because of both the reduced waste disposal in landfills and the increased amounts of waste materials for recycling. However, the greenhouse gas emission rate in waste sectors is anticipated to continually increase, mainly due to increased incineration of solid waste. The objective of this study was to analyze the property of Municipal Solid Waste (MSW) and estimate $CO_2$ emissions from domestic MSW incineration facilities. The $CO_2$ emission rates obtained from the facilities were surveyed, along with other two methods, including Tier 2a based on 2006 IPCC Guideline default emission factor and Tier 3 based on facility specific value. The $CO_2$ emission rates were calculated by using $CO_2$ concentrations and gas flows measured from the stacks. Other parameters such as waste composition, dry matter content, carbon content, oxidation coefficient of waste were included for the calculation. The $CO_2$ average emission rate by the Tier 2a was 34,545 ton/y, while Tier 3 was 31,066 ton/y. Based on this study, we conclude that Tier 2a was overestimated by 11.2 percent for the $CO_2$ emission observed by Tier 3. Further study is still needed to determine accurate $CO_2$ emission rates from municipal solid waste incineration facilities and other various combustion facilities by obtaining country-specific emission factor, rather than relying on IPCC default emission factor.

• Journal of Korea Society of Waste Management
• /
• v.35 no.7
• /
• pp.606-615
• /
• 2018

Over the past two decades, the options for solid waste management have been changing from land disposal to recycling, waste-to-energy, and incineration due to growing attention for resource and energy recovery. In addition, the reduction of greenhouse gas (GHG) emission has become an issue of concern in the waste sector because such gases often released into the atmosphere during the waste management processes (e.g., biodegradation in landfills and combustion by incineration) can contribute to climate change. In this study, the emission and reduction rates of GHGs by the municipal solid waste (MSW) management options in D city have been studied for the years 1996-2016. The emissions and reduction rates were calculated according to the Intergovernmental Panel on Climate Change guidelines and the EU Prognos method, respectively. A dramatic decrease in the waste landfilled was observed between 1996 and 2004, after which its amount has been relatively constant. Waste recycling and incineration have been increased over the decades, leading to a peak in the GHG emissions from landfills of approximately $63,323tCO_2\;eq/yr$ in 2005, while the lowest value of $35,962tCO_2\;eq/yr$ was observed in 2016. In 2016, the estimated emission rate of GHGs from incineration was $59,199tCO_2\;eq/yr$. The reduction rate by material recycling was the highest ($-164,487tCO_2\;eq/yr$) in 2016, followed by the rates by heat recovery with incineration ($-59,242tCO_2\;eq/yr$) and landfill gas recovery ($-23,922tCO_2\;eq/yr$). Moreover, the cumulative GHG reduction rate between 1996 and 2016 was $-3.46MtCO_2\;eq$, implying a very positive impact on future $CO_2$ reduction achieved by waste recycling as well as heat recovery of incineration and landfill gas recovery. This study clearly demonstrates that improved MSW management systems are positive for GHGs reduction and energy savings. These results could help the waste management decision-makers supporting the MSW recycling and energy recovery policies as well as the climate change mitigation efforts at local government level.

• Korean Journal of Soil Science and Fertilizer
• /
• v.19 no.2
• /
• pp.133-137
• /
• 1986

A liquid waste from methane fermentation was applied on a pasture of grass-legume mixtures to determine its effect and optimum application rate on plant growth. Fresh yields of the pasture increased as the liquid waste application rate increased, especially markedly increased when the 42 ton/10a of waste was applied only. The NPK components in soil and plant was also higher in the plots of liquid application than that of control. Therefore, the optimum application rate of liquid waste was found to be 42 ton/10a. This result indicates that the liquid waste is potentially useful source for a fertilizer and irrigation water.

• Fire Science and Engineering
• /
• v.16 no.2
• /
• pp.22-26
• /
• 2002

It is very important to find out how to economically recycle waste tyres thrown away from the industry to the field. This one is also consistent with environmentally-friend policy. Many papers have been produced for focusing on the strength using waste-tyre material. Now, many kind of particle sizes of waste-tyre material are being produced in Korea, with support of the government. This study is to figure out how much the waste tyre mixing concrete resists against temperature at fire and how much decrease rate it shows. All the result are compared here in order to find out the way to applicate it to the practical structure for this area. The mixing proportion rate is selected with an experience and try-and error method. Eventually some of distinctive results are mentioned in the conclusion. The waste tyre concrete heated with $600^{\circ}C$ temperature was almost no change of its strength comparing with the normal one.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.24 no.1
• /
• pp.51-57
• /
• 2016

This study is conducted to find out the problems of the public food waste recycling facility operation and its improvement. In order to save the national budget by analyzing plans to expand including operation rate for the food waste recycling facility, the alternative ways are suggested. The result can be as follows: Policy switch is required not only to save budget and stable disposal of food waste but also to promote resource recycling rather than expanding public facilities. In order to change the policy for stable and eco-friendly disposal of food waste, it is necessary to adopt semipublic system that prevent the decline of the rate of operation of private resource recycling facility. Furthermore, it is required to prepare both qualified technologies of public resource recycling and the ways of profitability secure.