• Korean Journal of Soil Science and Fertilizer
• /
• v.22 no.2
• /
• pp.100-104
• /
• 1989

This study was carried out in order to develop a compound fertilizer for raising rice seedling in trays. A compound fertilizer, a trail product, was manufactured using the major fertilizer sources of ammonium sulfate, diammonium phosphate and potassium chloride in combination with zeolite and glutamic acid fermentation waste. Besides, polyacrylamide for slow release control of the fertilzer and Tachigaren and sulfuric acid for reducing the occurrence of seedling rot were used. The component ratios of N, $P_2O_5$ and $K_2O$ of trial product were 4.19, 5.41 and 4.05 percent respectively. The dissolution rate of nitrogen component in water for the trial product with polyacrylamide was lower about fifteen percents than the product without polyacylamide in six hours. Hymexazole, main component of Thachigaren, from the product was released about 86.2 percents in forty eight hours. When the product with polyacylamide applied on red earth soil and paddy soil, the pH of soil ranged from 4.6 to 5.4 for 25 days experiment.

• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.4
• /
• pp.493-499
• /
• 2011

The objective of this study was to find the way to prolong the storage time of sawdust-based oyster mushroom (Pleurotus osteratus) spent substrate (OMSS) by fermenting with potential probiotic microorganisms to recycle the otherwise waste of mushroom farms. To this purpose, lactic acid bacteria (LAB) were screened to select the best lactic acid-producing strains. Three strains of LAB (Lactobacillus plantarum Lp1', Pediococcus acidilacticii Pa193, L. plantarum Lp2M) were selected and in mixture they lowered the pH of the fermented OMSS to 3.81. fOMSS (fermented sawdust-based oyster mushroom spent substrate) could be stored at room temperature for at least 17 days without any deterioration of feed quality based on the pH, smell, and color. In dry matter disappearance rate in situ, commercial TMR (total mixed ration), OMSS and OMMM (oyster mushroom mycelium mass) showed no significant differences between the samples after 6, 12 and 24 h incubation except for 48 h. Two separate field studies were performed to test the effects of fOMSS supplement on the growth performance of postweaning Holstein calves. Field trials included groups of animals feeding calf starter supplemented with: Control (no supplement), AB (colistin 0.08% and oxyneo 110/110 0.1%), fOMSS (10% fOMSS) and fConc (10% fermented concentrate) and DFM (direct-fed microbials, average $10^9$ cfu for each of three LAB/d/head). Growth performance (average daily gain and feed efficiency) of the fOMSS supplement group was higher than that of AB followed by fConc and DFM even though there was no statistically significant difference. The Control group was lower than any other group. Various hematological values including IgG, IgA, RBC (red blood cell), hemoglobin, and hematocrit were measured every 10 days to check any unusual abnormality for all groups in trial I and II, and they were within a normal and safe range. Our results suggest that sawdust-based OMSS could be recycled after fermentation with three probiotic LAB strains as a feed supplement for post-weaning calves, and fOMSS has the beneficial effects of an alternative to antibiotics for a growth enhancer in dairy calves.

• Journal of Bio-Environment Control
• /
• v.14 no.3
• /
• pp.218-231
• /
• 2005

This paper reviews the engineering approach needed to support humans during their long-term missions in space. This approach includes closed plant production systems under microgravity or low pressure, mass recycling, air revitalization, water purification, waste management, elimination of trace contaminants, lighting, and nutrient delivery systems in controlled ecological life support system (CELSS). Requirements of crops f3r space use are high production, edibility, digestibility, many culinary uses, capability of automation, short stems, and high transpiration. Low pressure on Mars is considered to be a major obstacle for the design of greenhouses fer crop production. However interest in Mars inflatable greenhouse applicable to planetary surface has increased. Structure, internal pressure, material, method of lighting, and shielding are principal design parameters for the inflatable greenhouse. The inflatable greenhouse operating at low pressure can reduce the structural mass and atmosphere leakage rate. Plants growing at reduced pressure show an increasing transpiration rates and a high water loss. Vapor pressure increases as moisture is added to the air through transpiration or evaporation from leaks in the hydroponic system. Fluctuations in vapor pressure will significantly influence total pressure in a closed system. Thus hydroponic systems should be as tight as possible to reduce the quantity of water that evaporates from leaks. And the environmental control system to maintain high relative humidity at low pressure should be developed. The essence of technologies associated with CELSS can support human lift even at extremely harsh conditions such as in deserts, polar regions, and under the ocean on Earth as well as in space.

• Journal of the Korea Institute of Building Construction
• /
• v.18 no.5
• /
• pp.419-427
• /
• 2018

The purpose of this study is to recycle steel slag generated from the iron producing process and to use steel slag as a construction material which is currently landfilled Steel slag is subjected to aging treatment due to the problem of expansion and collapse when it reacts with water. The Slag Atomizing Technology (SAT) method developed to solve these problems of expanding collapse of steel slag. In this study, experimental study on the emergency repair mortar using the reducing slag, electric arc furnace slag and silicon manganese slag manufactured by the SAT method is Reduced slag was shown an accelerated hydration when it was replaced with rapidly-setting cement, and the rate of substitution was equivalent to 15%. It is shown that the electric furnace oxide slag is equivalent to 100% of the natural aggregate, and it can be replaced by 15-30% when the silicon manganic slag is substituted for the electric furnace oxide slag. With the above formulation, it was possible to design the rapidly repair mortar for road use. These recycling slags can contribute on achieving sustainability of construction industry by reducing the use of cement and natural aggregates and by reducing the generation of carbon dioxide and recycling waste slag.

• Resources Recycling
• /
• v.17 no.4
• /
• pp.3-9
• /
• 2008

The total amount of fluidized bed incinerator ash, i.e. incombustion materials generated from the municipal solid waste incineration(MSWI) in Korea was approximately 14,000 tons in 2006. Most of the ash after ferrous metal separation is finally discard to the landfill sites. In the present work, possibility for recycling of the ash is studied to utilize the ash as raw materials for ceramic products. Incombustion materials obtained from the two different incinerators were used to recover the raw materials by applying the magnetic separation and screening process to remove metallic particles. The raw materials show relatively low heavy metals content obtained from the KSLP leaching tests. The ceramic products were prepared by mixing the clay with the various amounts of the raw material. The physical properties, i.e. shrinkage rate, absorbancy and compressive strength of the ceramic products sintered at $1,000^{\circ}C$ and $1,050^{\circ}C$, respectively were improved by increasing the addition amounts of the incinerator ash. Based on the leaching tests the ceramic products also be satisfied with the standard limits on the leachability of heavy metals because most of the metallic materials are effectively removed from the incombustion materials by appling the separation processes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.6B
• /
• pp.595-604
• /
• 2009

The HCCA reserves the channel resources based on the mean data rate in IEEE 802.11e. It may cause either the waste of channel resource or the increase of transmission delay at MAC layer if the frame size is rapidly varied when a compressed mode video codec such as MPEG video is used. To solve these problems, it is developed that the packet scheduler allocates the wireless resource adaptation by according to the packet size. However, it is difficult to perform the admission control because of the difficulty with calculating the available resources. In this paper, we propose a CAC mechanism to solve the problem that may not satisfy the QoS by increasing traffic load in case of using EDCA. Especially, the proposed CAC mechanism calculates the EB of TSs using the traffic information transmitted by the application layer and the number of average transmission according to the wireless channel environment, and then determines the admission of the TS based on the EB. According to the simulation results of the proposed CAC mechanism, it admitted the TSs under the loads which are satisfied within the delay bound. Therefore, the proposed mechanism guarantees QoS of streaming services effectively.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.32 no.6
• /
• pp.713-717
• /
• 1999

In order to utilize protein hydrolysate produced from hoki (Johnius Belengeri) frame among many different fish processing wastes, hoki frame peptide (PHFP) and phosphorylated hoki frame peptide (PHFP) were prepared, and their calcium absorption accelerating effects were investigated in comparison to control and casein phosphopeptide (CPP). In in vitro experiment, HFP and PHFP inhibited calcium phosphate formation as high as 1.5-fold and 2.5-fold, respectively, comparing to control, In addition, the inhibition rate of calcium phosphate precipitation as increasing concentrations of HFP and PHFP was risen and was similar to that of CPP at 2.0 mg/ml of PHFP concentration, In in vivo experiment using the rats, the groups fed HFP and PHFP indicated significantly increased calcium content in the femur. In particular, the calcium content in the small intestine of the rat fed PHFP was higher than that of control group by approximately $60\%$.

• Applied Chemistry for Engineering
• /
• v.8 no.6
• /
• pp.920-926
• /
• 1997

The catalytic glycolysis process is the method of chemical recycling where the polyol and carbamate compounds recovered by transesterification reaction are reused to produce new polyurethane foams. In this work, ethylene glycol, diethylene glycol, and 1,4-butanediol were used to decompose polyurethane foams and various metallic acetates were provided as catalysts. The catalytic glycolsis of polyurethane foams was taken place in the reaction temperature of $180{\sim}200^{\circ}C$. The reaction rates of catalytic glycolysis reaction were indicated by the viscosity of the reaction products at different reaction times. IR and GPC analysis showed the types and the molecular weight distributions of the products. The catalytic glycolysis was profitable for using ethyleneglycol at high temperature. The activities of the catalysts are suitable for K, Na, Tl acetate, and the products are composed of comparatively high-contained amine compounds and carbamate compounds. In the case of Sr acetate and Quinoline, the reaction rate was somewhat low. However, the content of polyol was high and the content of the side-products was low. The foams which were prepared by blending up to 20wt% of recovered polyol with virgin polyols showed better physical properties in tensile strength, hardness, tear strength, and compressive strength compared to those of polyurethane foams from virgin polyol.

• Journal of the Korean GEO-environmental Society
• /
• v.10 no.6
• /
• pp.27-33
• /
• 2009

In this study, it was analysed physical characteristics, TS, moisture, C/N ratio, leaching test, and element analysis in landfill wastes of 10 years old without landfill pretreatment. The Organic material content was 7.2%~23.5% and soil was the main inorganic materials which it's rate was 54.1%~71.0%, in landfill wastes. The results of TS, VS, and moisture were represented 51.5%~68.1%, 23.6%~56.1%, 32.0%~48.4%, respectively. The analysis of hazardous materials did not indicate Hg, $Cr^{+6}$, CN, Organic Phosphorus, TCE and PCE, however the Pb of leaching materials showed 0.023~0.092 mg/L, which was the highest. As the result of the element analysis, C was 47.74%~56.72%, N was 4.09%~9.92%, the C/N ratio was 5.76~12.57 and the result of soils around landfill was the highest heavy material, Pb, 2.465 mg/kg~10.251 mg/kg. The objectives of this paper are to investigate states, stabilization of these closed landfills and to gain suitable data for post-closure care using some parameters through analysis of landfill environment.

• Plant Journal
• /
• v.12 no.1
• /
• pp.29-36
• /
• 2016

It is becoming increasingly important to make use of alternative energy source. because It is not able to rely on only fossil fuel for the recent increasing demand of energy consumption. With this situation, lots of studies for utilizing low grade energy such as industrial waste heat, solar energy, and geothermal energy have been conducted. The aim of this study is to predict the operation characteristics of working fluid by using performance analysis program (ThermoFlex) through the system analysis which is not mixing district return water but using ORC(Organic Rankine Cycle, hereinafter ORC) as a downstream cycle when accumulating district heating (hereinafter DH). In this study, We conducted the performance analysis for the case which has the district heating water temperature($120^{\circ}C$) and Flow rate of $163m^3/h$ (including District Heating return water flow), and examined several working fluid which is proper to this temperature. The case using R245fa (which is the best-case) showed 269.2kW power output, 6.37% efficiency. Additionally, Cut down on fuel was expected because of the boiler inlet temperature increase by being Formed $57.3{\sim}85^{\circ}C$ in a temperature of district heating return water, depending on a pressure change of a condenser in ORC system.