• 제목/요약/키워드: waste paper

검색결과 1,932건 처리시간 0.03초

폐기물 인증프로그램 (Waste Package Quality Certification Program)

  • 정의영;이락희;고덕준;김헌;이제창;임석남
    • 한국방사성폐기물학회:학술대회논문집
    • /
    • 한국방사성폐기물학회 2003년도 가을 학술논문집
    • /
    • pp.256-260
    • /
    • 2003
  • 본 논문은 처분시설에 인도될 폐기물이 처분시설의 폐기물인수기준(Site specific Waste Acceptance Criteria)에 적합한 특성을 갖고 있음을 입증하기 위해 폐기물발생자들이 이용하고 있는 방법과 처분시설운영자가 처분대상 폐기물의 처분적합성을 검증하기 위한 방법을 제안함으로써 처분을 고려한 폐기물 처리를 유도하고 궁극적으로 처분시설의 안전성을 확보하기 위함이다. 폐기물의 처분안전성을 위해서 폐기물 발생자는 발생된 폐기물을 처분자의 폐기물인수기준에 맞게 감용, 처리, 포장하여야 하며, 처분자는 체계적인 검사절차에 따라 인수기준의 충족여부를 확인하여야 한다. 폐기물에 대한 폐기물인수기준 충족여부 확인을 위하여 현재 처분시설을 운영하고 있는 국가에서는 폐기물인증프로그램(Waste package qualify Certification Program)을 도입하여 폐기물에 대한 처분수용여부를 확인하고 있다.

  • PDF

E-waste recycling의 경제성(經濟性) 고찰(考察) (Economical Review of the E-waste Recycling)

  • 오재현;강남기
    • 자원리싸이클링
    • /
    • 제22권4호
    • /
    • pp.12-21
    • /
    • 2013
  • E-waste(폐전기전자기기, WEEE)는 많은 종류의 금속을 함유한 유가물과 유해물의 복합혼합물로 자원의 유효이용과 환경부하저감을 위해 리싸이클링 처리가 필수로 되어 있다. 특히 최근 레어메탈의 공급제약문제 등으로 도시광산자원 중에서 E-waste의 비중이 높아지고 있다. 한편, E-waste의 리싸이클링산업에 있어서 E-waste의 경제적 가치의 파악은 매우 중요하다. 이와 같은 관점에서 본보에서는 E-waste를 대형가전, 소형가전, 휴대전화기 및 PCB(전자인쇄회로기판, 기판)로 분류해서 경제적 가치를 논하였다.

산업폐기물인 제지회의 활용방안에 관한 연구 (A Study on Utilization Method of Paper Ash in Industrial Waste)

  • 허열;이처근;이명원;안광국
    • 한국안전학회지
    • /
    • 제14권4호
    • /
    • pp.135-141
    • /
    • 1999
  • This study is an experimental study to investigate the possibility of the utilization of paper ash as the cover, liner in waste disposal landfill and other construction materials. The sample used in these tests was obtained from Daehan paper mill. A series of tests were peformed to evaluate basic properties, compaction, permeability, compressive strength, consolidation, leaching, and CBR of paper ash. In order to investigate the soil engineering properties of paper ash, the test results were compared with those obtained of fly ash. The results of unconfined compression tests show that paper ash had a larger strength than the fly ash. Also, the maximum dry unit weight of paper ash was approximately 59~76.9% less than that of the fly ash. It was found from the results of leaching test that paper ash is classified as non-detrimental general wastes according to the waste management law.

  • PDF

폐기물 매립지반에서의 PG Pile의 적용성에 관한 연구 (A Study on the Utilization of PG-Pile in waste landfill)

  • 천병식;최춘식
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2000년도 가을 학술발표회 논문집
    • /
    • pp.419-426
    • /
    • 2000
  • Waste landfill consists of cover layer, glass, robber, sheet, food waste, etc and is in very loose state. So, the proper method must be applied to ground improvement of waste landfill according to its characteristics and conditions. In this paper, analysis for field tests as static loading test, bearing capacity test were peformed. In result, PG pile method proved to be effective and economic, because it affected increase of end bearing capacity, the prevention of differential settlement and over 20% increase of density by expansion of pile.

  • PDF

폐기물 매립지반에서의 PG Pile의 적용성에 관한 연구 (A Study on the Utilization of PG-Pile in Waste Landfill)

  • 천병식;최춘식
    • 한국해양공학회:학술대회논문집
    • /
    • 한국해양공학회 2000년도 추계학술대회 논문집
    • /
    • pp.135-139
    • /
    • 2000
  • Waste landfill consists of cover layer, glass, robber, sheet, food waste, etc and is in very loose state. So, the proper method must be applied to ground improvement of waste landfill according to its characteristics and conditions. In this paper, analysis for field tests as static loading test, bearing capacity test were performed. In result, PG pile method proved to be effective and economic, because it affected increase of end bearing capacity, the prevention of differential settlement and over 20% increase of density by expansion of pile.

  • PDF

Appropriate Technologies for Municipal Solid Waste Management in Bantayan Island, Philippines

  • Yu, Kwang Sun;Thriveni, Thenepalli;Jang, Changsun;Whan, Ahn Ji
    • 에너지공학
    • /
    • 제26권1호
    • /
    • pp.54-61
    • /
    • 2017
  • In general, solid waste arises from lots of human activities such as domestic, agricultural, industrial, commercial, waste water treatment, construction, and mining activities etc. If the waste is not properly disposal and treated, it will have a negative impact to the environment, and hygienic conditions in urban areas and pollute the air with greenhouse gases (GHG), ground water, as well as the soil and crops. In this paper, the Carbon Resources Recycling Appropriate Technology Center feasibility studies are reported at Bantayan Island, Philippines on the municipal solid waste management. The present objective of our study is to characterize the municipal solid waste incineration (MSWI) bottom ash and case study of MSWI production status in Bantayan, Philippines. Currently, wide variety of smart technologies available for MSWI management in developed countries. Recycling is the other major alternative process for MSWI landfill issues. In this paper, the feasibility studies of applied appropriate technologies for the municipal solid waste generation in Bantayan Island, Philippines are reported.

Guided wave analysis of air-coupled impact-echo in concrete slab investigation on the use of waste tyre crumb rubber in concrete paving blocks

  • Murugan, R. Bharathi;Natarajan, C.
    • Computers and Concrete
    • /
    • 제20권3호
    • /
    • pp.311-318
    • /
    • 2017
  • This paper investigates the utilization of waste tyre crumb rubber as the fine aggregate in precast concrete Paving block (PCPB). PCPB's are generally preferred for city roads, pedestrian crosswalk, parking lots and bus terminals. The main aim of this paper is to evaluate the mechanical properties of wet cast PCPB containing waste tyre crumb rubber. The mechanical properties were investigated using a density, compressive strength, split tensile strength and flexural strength tests at 7, 28 56 days according to the IS 15688:2006 and EN1338. The wet cast method was followed for producing PCPB samples. The fine aggregate (river sand) was replaced with waste tyre crumb in percentage of 5%, 10%, 15%, 20% and 25% by volume. All the test results were compared with the conventional PCPB (Without rubber). The test results indicate its feasibility for incorporating waste tyre crumb rubber in the production of PCPB by the wet cast method.

Mechanical properties of recycled aggregate concrete produced with Portland Pozzolana Cement

  • Suman, Saha;Rajasekaran, C
    • Advances in concrete construction
    • /
    • 제4권1호
    • /
    • pp.27-35
    • /
    • 2016
  • The quantity of construction and demolition waste has been greatly increasing recently. It causes many problems to the environment. For this reason, demolition waste management becomes inevitable in order to overcome the environmental issues. The present study aims to evaluate the effects of using recycled coarse aggregate, which is generated from construction and demolition waste, on the properties of recycled aggregate concrete. An experimental investigation on the strength characteristics of concrete made with recycled coarse aggregate is presented and discussed in this paper. In this study, Portland Pozzolana Cement (fly ash based) is used instead of ordinary Portland cement. The results of this investigation show the possibility of the use of recycled coarse aggregates in the production of fresh concrete. Use of demolition waste as coarse aggregate will lead to a cleaner environment with a significant reduction of the consumption of natural resources. A comparative study on the strength characteristics of recycled aggregate concrete made with Ordinary Portland Cement and Portland Pozzolana Cement is presented and discussed in this paper.

A comprehensive optimization model for integrated solid waste management system: A case study

  • Paul, Koushik;Chattopadhyay, Subhasish;Dutta, Amit;Krishna, Akhouri P.;Ray, Subhabrata
    • Environmental Engineering Research
    • /
    • 제24권2호
    • /
    • pp.220-237
    • /
    • 2019
  • Solid waste management (SWM) is one of the poorly rendered services in developing countries - limited resources, increasing population, rapid urbanization and application of outdated systems leads to inefficiency. Lack of proper planning and inadequate data regarding solid waste generation and collection compound the SWM problem. Decision makers need to formulate solutions that consider multiple goals and strategies. Given the large number of available options for SWM and the inter-relationships among these options, identifying SWM strategies that satisfy economic or environmental objectives is a complex task. The paper develops a mathematical model for a municipal Integrated SWM system, taking into account waste generation rates, composition, transportation modes, processing techniques, revenues from waste processing, simulating waste management as closely as possible. The constraints include those linking waste flows and mass balance, processing plants capacity, landfill capacity, transport vehicle capacity and number of trips. The linear programming model integrating different functional elements was solved by LINGO optimization software and various possible waste management options were considered during analysis. The model thus serves as decision support tool to evaluate various waste management alternatives and obtain the least-cost combination of technologies for handling, treatment and disposal of solid waste.

구조모형을 이용한 적정 종량제 봉투 가격 추정에 관한 연구 (Estimating the Price of Standard Waste Bags Using a Structural Model)

  • 양준석;최은철;이상헌
    • 자원ㆍ환경경제연구
    • /
    • 제31권1호
    • /
    • pp.31-50
    • /
    • 2022
  • 이 연구는 배출자부담원칙을 달성하는 적정 수준의 종량제 봉투 가격을 추정한다. 이 연구의 주요한 기여는 기존 연구와 달리 생활폐기물 배출 수요함수와 생활폐기물 처리비용함수 간의 구조적 관계를 이용하여 새로운 균형 가격을 찾았다는 점이다. 추정방법은 고정점 반복법을 이용한다. 주요 연구 결과는 다음과 같다. 배출자부담원칙이 달성되는 조건을 생활폐기물 처리에 대한 총수입과 총비용이 일치하는 점으로 정의하고, 단순하게 산술적으로 계산하면 종량제 봉투 가격은 현재보다 약 3.12배 높은 수준에서 정해져야 한다. 그러나 구조적 관계를 이용하여 추정한 결과는 종량제 봉투 가격이 현재보다 약 4배 높은 수준에서 정해질 필요가 있음을 보여준다. 이러한 결과는 고정비용의 존재로 인하여 폐기물당 처리비용이 이전보다 높아지기 때문이다. 추정된 적정 가격을 적용할 경우 전국적으로 생활폐기물 발생량은 약 10% 정도 감소하는 것으로 나타난다.