• 한국전기전자재료학회논문지
• /
• 제33권4호
• /
• pp.310-314
• /
• 2020

Although waste oil derived fuel (WDF) production technology was developed under a government initiative ~10 years ago, it became stagnant owing to the small size of participating companies, residents' rejection of foul odor, and the nature of the technology for recycling waste that was avoided. However, this subject is under the spotlight again because of recent developments, such as garbage crisis. In particular, plastic is the most difficult waste to dispose of, with more than 4 million tons of plastic waste produced every year according to statistics from the Ministry of Environment. The most effective method for treating plastic waste is to produce WDF through low temperature thermal decomposition. The WDF includes several volatile ingredients that mostly limit the use of fuel for boilers, owing to safety concerns. In particular, flash point is legally stipulated because of secondary contamination in the distribution process and the risk of fire and explosion. It is required that external shipments (distribution) should be maintained in the range of at least 30~60℃ (excluding explosion prevention facilities) for diesel power generation. Therefore, this study seeks to find the flash point that is best suited to WDFs produced from plastic waste.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제21권1호
• /
• pp.22-27
• /
• 2016

Hydrothermal carbonization (HTC) is a carbonization method of thermochemical process at a relatively low temperature (180-250℃). It is reacted by water containing raw material. In this study, it was selected for effective disposal method of food waste because food waste in Korea has large amount water. 5 kg, 10 kg, 15 kg of food waste were reacted for 6 hours at 200℃ for selecting the optimum amount of raw material. Since the derived optimum amount, food waste was reacted for 2 hours, 4 hours and 6 hours at 200℃ and 1.5 MPa. After carbonization, it was analyzed to evaluated the properties by ultimate analysis, iodine adsorption, BET surface area and SEM. After analyzing the characteristics, it can be utilized as a basic data for applied.

• Journal of the Korean Wood Science and Technology
• /
• 제30권1호
• /
• pp.34-39
• /
• 2002

국내 주요 간벌재와 목질재료 탄화물중 성능면과 자원면을 고려하여 선정한 후 오수정화 실험을 실시하였다. 덩어리상태(약 3×3×3 cm)의 탄화물의 주방오수 및 정화조오수 정화실험에서 간벌재 탄화물보다 목질재료 탄화물의 정화능력이 뛰어났다. 덩어리상태에서는 미세세공보다는 파티클보드의 파티클 및 MDF의 섬유간의 간극이 정화에 더 유효하게 작용했기 때문이라고 판단된다. 처리오수의 색은 처리 후 옅어졌으며 목질재료탄이 간벌재탄보다 더 옅은 색을 보였다. 냄새는 모두 감소하는 경향을 보였다.

• 한국세라믹학회지
• /
• 제29권1호
• /
• pp.15-22
• /
• 1992

The reason for permanent shrinking of recycled castable refractories from alumino-silicate waste refractories was investigated and the method to control shrinking is suggested in order to increase maximum service termperature. The porosity of castable refractories with waste material as large aggregate decreases after heat treatment because the porosity of waste refractories is greater than the of green material, in which CaO around large aggregate penetrates into aggregate and promotes liquid phase sintering. The shrinking of recycled castable refractories resulted in the decrease in porosity can be controled by addition of green kaolin chamotte as large aggregate. The shrinking of recycled castable refractories caused by the differences in densities of mineral phases before and after heat treatment can be controled by addition of kyanite. The use of green kaolin chamotte and kyanite increases the service temperature of recycled castable refractories up to 1500$^{\circ}C$.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.387-392
• /
• 2001

Kobe Steel, LTD. and Midrex Technologies Inc. jointly developed the FASTMET$\circledR$ process as a steel mill waste recycle technology in which the DRI product meets BF feed material or BOF/EAF feed material requirements. FASTMET(R) process turns value-less wastes into valuable DRI and sellable zinc oxide, and gives the solution for the steel mill wastes recycling from both economical and environmental viewpoints. During the development of the process, Laboratory, Pilot Plant and Demonstration Plant tests were carried out from 1990 to 1998. The first FASTMET(R) commercial plant began operation in April, 2000 and the second commercial plant started in April, 2001 Both commercial plants have proceeded successfully preying that FASTMET$\circledR$ is a suitable process for recycling steel mill waste and for producing DRI as an iron source.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 가을학술발표대회논문집
• /
• pp.83-84
• /
• 2023

In this study, in order to utilize waste fishing net as a building materail, the possibility of replacing the fiber used in polymer repair mortar with waste fishing net fiber was confirmed. As for basic characteristics, flow, compressive strength, and flexural strength tests were performed to compare and analyze fiber performance, and the test results showed performance equal to or better than existing fibers.

• 한국건설순환자원학회논문집
• /
• 제8권4호
• /
• pp.436-443
• /
• 2020

다양한 복합재질 생활계 폐플라스틱의 물질재활용 확대를 위해서는 물질재활용 제품의 용도개발 및 이들의 품질 안정성 확보 노력이 필요하다. 본 논문에서는 생활계 폐플라스틱 물질재활용 제품의 품질에 대한 안정성을 확보하기 위한 기초 연구로서 발생지역에 따른 생활계 폐플라스틱의 혼입율 특성 및 이를 활용한 물질재활용 제품의 생산시기에 따른 품질특성을 비교 검토하였다. 그 결과 발생 도시에 따른 생활계 폐플라스틱 중 재활용 가능한 폐플라스틱의 구성비율은 64.5~90.4%로서 도시별 큰 차이를 보이고 있다. 또한 4개월간 생산시기별 물질재활용 제품의 평균 인장강도는 12.33MPa, 평균 연신율은 5.94%, 평균 밀도는 1.35g/㎤, 평균 회분은 3.66%인 것으로 나타났다.

• Nuclear Engineering and Technology
• /
• 제43권5호
• /
• pp.459-468
• /
• 2011

The current solution to the problem of using cementitious material for sealing purposes in a final radioactive waste repository is to develop a low-pH cement grout. In this study, the material properties of a low-pH cement grout based on a recipe used at ONKALO are investigated by considering such factors as pH variation, compressive strength, dynamic modulus, and hydraulic conductivity by using silica fume and micro-cement. From the pH measurements of the hardened cement grout, the required pH (< pH 11) is obtained after 130 days of curing. Although the engineering properties of the low-pH cement grout used in this study are inferior to those of conventional high-pH cement grout, the utilization of silica fume and micro-cement effectively meets the long-term environmental and durability requirements for cement grout in a radioactive waste repository.

• Elastomers and Composites
• /
• 제36권2호
• /
• pp.86-93
• /
• 2001

새로운 TPE(Thermoplastic Elastomer) 블렌드 재료로서 폐 EPDM(Ethylene Propylene Diene Monomer)분말의 사용에 따른 환경문제를 해결하고, TPE의 고부가 가치화를 위하여 PP (Polypropylene)와 폐 EPDM분말을 주원료로 하고, 동방향 이축압출기(Co-rotating Twin Screw Extruder)를 사용하여 동적가교를 이루어 TPE재료를 제조하였다. TPE 재료의 인장강도, 파단신율, 탄성율 등의 물성을 향상시킬 목적으로 스크류 조합별로 폐 EPDM/PP를 블렌드하여 기계적물성을 조사하였으며, 모폴로지를 조사하였다. 스크류 조합에서는 혼련판과 역 스크류 엘리먼트의 수가 증가할수록 블렌드물의 전단력과 체류시간이 증가하여 동적가교가 증가하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 춘계 학술논문 발표대회
• /
• pp.321-322
• /
• 2013

Recently, the exhaustion of resource and environmental damage is serious due to the global warming because of the CO₂ exhaust and each type the natural aggregate picking described below. meanwhile, The rest is the actual condition gone to the dumping ground that there is nearly no use which the waste glass can recycle and it is recycled. This research applied the waste glass as the cement substitute material the inorganic binder and coares aggregate substitute material. It utilizes the substitute material of the cement according to it and natural aggregate and tries to develop the environment-friendly artificial stone. The inorganic binder used the blast furnace slag, red mud, and fly ash. The straight type steel fiber, PVA fiber, PA fiber, and cellulosic fiber were used with a kind of fiber. As to the experimental item according to it, the compressive strength is the flexural strength and compressive strength.