• 한국지반공학회논문집
• /
• 제22권11호
• /
• pp.25-35
• /
• 2006

본 연구에서는 폐어망을 이용한 보강 경량토의 역학적 특성을 고찰하였다. 본 실험에서 사용된 보강 경량토는 부산 신항 건설현장에서 채취한 준설토와 시멘트, 기포 및 폐어망으로 구성되어졌다. 다양한 함유율의 폐어망이 혼합된 보강 경량토의 보강효과를 고찰하고, 무보강 경량토와 보강 경량토의 거동 특성을 비교하기 위하여 다양한 실내실험이 수행되어졌다. 보강 경량토에 대한 실험결과 응력-변형 관계와 일축압축강도는 폐어망에 의해 큰 영향을 받는다는 것이 나타났다. 보강 경량토의 압축강도는 양생기간이 증가할수록 증가하며, 폐어망을 첨가함으로써 일반적으로 증가하지만, 압축강도 증가량은 폐어망 함유율에 비례하지는 않는다. 본 실험의 경우 폐어망 함유율이 0.25%일 때 최대 압축강도가 발현되는 것을 알 수 있었다. 한편, 보강 경량토의 함수비 변화는 양생기간 7일까지 급격하게 감소한 후 일정한 값에 수렴하였다.

• 펄프종이기술
• /
• 제48권2호
• /
• pp.56-60
• /
• 2016

Neutral or alkaline papermaking provides many advantages in paper strength and processing conditions. It also provides the opportunity of using calcium carbonate fillers in papermaking. These diverse advantages have made almost all paper machines of printing and writing papers run under neutral and alkaline conditions. On the other hand, linerboard machines, which use recycled papers as a raw material, are running under acid conditions using a rosin sizing system. Because the recycled raw materials used by the linerboard industry contain significant amounts of alkaline papers, the linerboard industry has an interest in the possibility of using the neutral or alkaline papermaking opportunity. In this study, the compatibility of the recycled linerboards under neutral or alkaline papermaking conditions was examined by recycling them under various pH conditions. The sizing degree of the papers recycled under neutral or alkaline was significantly lower than that of acid formed papers indicating that during the neutral or alkaline recycling process the rosin sized papers lost their sizing efficiency. Recycling of acid formed linerboards under neutral or alkaline conditions increased the amount of foam, and the foam contained substantial amount of solid materials derived from the acid sizing systems. Use of cationic polyelectrolytes including PEI and poly-DADMAC improved the sizing degree of the recycled papers under neutral and alkaline conditions. PEI decreased the foam generation as well while poly-DADMAC did not show any reducing effect of the foam. These results suggest that PEI forms coordinate bonds with rosin acid and precipitate them onto the surface of recycled fibers, while the reaction products between poly-DADMAC and rosin acid ions still remain water soluble under neutral or alkaline conditions.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 춘계 학술논문 발표대회
• /
• pp.217-218
• /
• 2012

To prevent energy waste in buildings used heat insulator. Heat insulator materials can be classified inorganic and organic. The organic material is be toxic gas emission, when a fire occurs. And it has lower water resistance. The inorganic material is heavy and worse thermal performance than organic materials. This study focused on thermal conductivity and density of inorganic foam material for using industrial by-products materials.

• 한국어업기술학회:학술대회논문집
• /
• 한국어업기술학회 2003년도 춘계 수산관련학회 공동학술대회발표요지집
• /
• pp.219-220
• /
• 2003

The success of recirculating system depends largely on the treatment efficiency of waste generated in the system. fine solids were suspected to be responsible for fish kill in a recirculating system. Clogging of biofilter may be induced by high solids concentration in recirculating systems. Also, the solids could generate more ammonia nitrogen and oxygen demand if not removed out of recirculating system as soon as possible (Weeks et al., 1992). (omitted)

• 방사성폐기물학회지
• /
• 제2권3호
• /
• pp.219-230
• /
• 2004

Most of the low-level liquid radioactive wastes generated from PWR plants are classified into high or low total suspended solid(HTDS or LTDS), and into radiochemical and radioactive laundry waste. Although the evaporation process has a high decontami- nation ability, it has several problems such as corrosion, foam, and congestion. A new liquid waste disposal process using the ion-exchange demineralizer(IED), instead of the current evaporation process, has been introduced into the Yonggwang NPP #5 and 6. These two methods have been compared to understand the differences in this study. Aspects compared here were the released radioactivity amount of the liquid radioactive wastes, the dose of off-site residents, the decontamination factor, and the amount of the solid radioactive wastes. The IED system is designed to discharge higher radioactivity about 20% than the evaporating system, and the actual radioactivity released from the evaporating and IED system were 0.473mCi and 1.098mCi, respectively. The radioactivity released from the IED was 2.32 times higher than that of the evaporating system. The dose of off-site residents was $2.97{\times}10^{-6}$mSv for the evaporating system, and $6.47{\times}10^{-6}$mSv for IED. The decontamination factor(DF) of the evaporator is, in most cases, far lower than the lower limits of detection(LLD) with the Ge-Li detector. Due to the low concentration of the liquid wastes collected from the liquid waste system, the decontamination factor of IED is very low. Since there is not enough data on the amount of solid radioactive wastes generated by the evaporation system, the comparison on these two systems has been conducted on the basis of the design, and the comparison result was that the evaporating system generated more wastes about 40% than IED.

• 한국응용과학기술학회지
• /
• 제3권1호
• /
• pp.73-77
• /
• 1986

The effect of $^{60}Co$ are discussed with regard to radiochemical destruction detergent. The study deals specifically with the effect gamma radiation from $^{60}Co$ source upon aquous solution of detergent. Test on biodegradation of A B S (solium alkyl benzene sulfonate) under the waste-water prior to the detergent conversion to biodegradable surfactants. The reason for removal of A B S was their extreme environmental stability and the associateo appearance of foam in waste water treatment plants. Although the A B S are considered biodegradable the time required for biodegradation in practical with the present environmental guidelines.

• International Journal of Advanced Culture Technology
• /
• 제3권1호
• /
• pp.21-30
• /
• 2015

Ceramic foams are prepared as positive images corresponding to a plastic foam structure which exhibits high porosities (85-90%). This structure makes the ceramic foams attractive as a catalyst in a dry reforming process, because it could reduce a high pressure drop problem. This problem causes low mass and heat transfers in the process. Furthermore, the reactants would shortly contact to catalyst surface, thus low conversion could occur. Therefore, this research addressed the preparation of dry reforming catalysts using a sol-gel catalyst preparation via a polymeric sponge method. The specific objectives of this work are to investigate the effects of polymer foam structure (such as porosity, pore sizes, and cell characteristics) on a catalyst performance and to observe the influences of catalyst preparation parameters to yield a replica of the original structure of polymeric foam. To accomplish these objectives industrial waste foams, polyurethane (PU) and polyvinyl alcohol (PVA) foams, were used as a polymeric template. Results indicated that the porosity of the polyurethane and polyvinyl alcohol foams were about 99% and 97%. Their average cell sizes were approximate 200 and 50 micrometres, respectively. The cell characteristics of polymer foams exhibited the character of a high permeability material that can be able to dip with ceramic slurry, which was synthesized with various viscosities, during a catalyst preparation step. Next, morphology of ceramic foams was explored using scanning electron microscopy (SEM), and catalyst properties, such as; temperature profile of catalyst reduction, metal dispersion, and surface area, were also characterized by $H_2-TPR$ and $H_2-TPD$ techniques, and BET, respectively. From the results, it was found that metal-particle dispersion was relatively high about 5.89%, whereas the surface area of ceramic foam catalysts was $64.52m^2/g$. Finally, the catalytic behaviour toward hydrogen production through the dry reforming of methane using a fixed-bed reactor was evaluated under certain operating conditions. The approaches from this research provide a direction for further improvement of marketable environmental friendly catalyst production.

• Korean Chemical Engineering Research
• /
• 제46권6호
• /
• pp.1039-1042
• /
• 2008

폐폴리우레탄의해중합에의하여제조된재생폴리올의작용기를증가시키기위하여해중합시첨가한 pentaerythritol(PEN, 작용기(f)=4) 또는 sorbitol(SOR, f=6)이 생성된 재생 폴리올의 작용기와 이를 사용하여 제조한 경질 폴리우레탄폼(polyurethane rigid foam; PUR)의 기계적 물성에 미치는 영향을 조사하였다. PEN 또는 SOR를 첨가한 경우 OH 작용기가 2.2에서 약 2.8로 증가하였고, PUR의 치수안전성 등을 비롯한 기계적 물성이 크게 향상됨을 확인하였다. 이러한 결과는 폴리올의 작용기가 증가하여 제조한 PUR의 가교밀도를 향상시킨 것으로 해석되었다. 또한 재생 폴리올의 폴리올 시스템에 대한 사용량을 8 wt%에서 약 20 wt%로 증가시킬수 있었다.

• Journal of the Korean Wood Science and Technology
• /
• 제26권4호
• /
• pp.43-49
• /
• 1998

The availability of large quantities of waste woods provides an impetus for investigating woody biomass potential uses. Polyurethane (PU) foams are prepared with reacting isocyanates and polyols, and are used. in various industry fields. Thus, lignocellulosic waste raw-materials are proposed as replacement for synthetic polyol to PU foam formulation. In this study PU foams were manufactured from liquefied woods, methanediisocyanate(MDI), catalyst, foaming stabilizer, and viscosity aids. The polyol content, isocyanate.hydroxyl group (NCO/OH) ratio, and water content were varied to evaluate their effects on the foaming and water absorption of the PU foams. Less than 400 Molecular weight. of polyethylene glycol(PEG) and 1 to 3 solvent to woody raw-material ratio were desirable for liquefying woody materials. Liquefying rate was increased with more than 3 % addition of inorganic and organic catalysts and raising reaction temperature more than $150^{\circ}C$. Addition of starch enhanced liquefying of woody materials. Fourty percents of starch resulted in about 90% liquefying rates. Foaming rates were increased with increasing moisture contents of liquefied wood. Moisture contents of 0.6% resulted in 5 time-foaming rates, and seven percents of moisture contents more than 30 time-foaming rates. But, an increase in water content may result in a decrease in cross-links between wood polyol and isocyanate, because the NCO/OH ratio is constant. Increasing moisture contents have significantly decreased density of PU foams. The optimum water content should be about 2.5% or less in this adopted condition.

• Elastomers and Composites
• /
• 제38권3호
• /
• pp.251-261
• /
• 2003

본 연구에서는 폐타이어 고무분말 (GTR)과 일부 난연제를 포함한 acrylonitrile-butadiene rubber (NBR) 발포체를 제조하고, 난연 및 발포특성에 GTR이 미치는 영향을 조사하였다. 그결과 고무/난연제의 조성비가 $1/1.95{\sim}3.70 wt%$이며, GTR의 함량이 20 wt% 범위 이내에서 원활한 핵의 생성 및 cell의 성장으로 인해 높은 발포율 ($215{\sim}300 %$)과 균일한 닫힌/반 닫힌 셀(closed/semi-closed cell)을 보여주었으며, 높은 LOI ($29.4{\sim}40.0$)와 낮은 (A)-HRR을 보임을 확인하였다. 또한 GTR의 함량이 증가함에 따라 자체적인 난연 특성으로 인해 LOI가 증가하고, HRR이 감소하는 반면에 (A)-COY는 증가함을 확인하였다.