• Fashion & Textile Research Journal
• /
• v.7 no.3
• /
• pp.333-338
• /
• 2005

We examined the antimicrobial effects of the cotton fabrics which were laundered at different conditions and treated with a colloidal silver solution using Staphylococcus aureus. Colloidal silver solution was made from commercial colloidal silver generator by electrolysis. The fabric which was innoculated and washed with water before drying had no more Staphylococcus aureus, but which was innoculated and dried before washing with detergent solution had lower reduction rate. The fabric washed with oxygen bleach did not have an antimicrobial effect, but rinsed with 0.07% fabric softener showed antimicrobial properties. The fabric rinsed with 0.7ppm colloidal silver solution had better antimicrobial effects. As the treating concentration of silver solution increased, the antimicrobial property of the fabric was increased. The fabric treated with 5% silver solution sustained reflectance and whiteness of untreated fabric. The colloidal silver treated fabric lost antimicrobial property after washing because nano-sized silver particles were located on uneven fiber surface without chemical bonding forces.

• Textile Coloration and Finishing
• /
• v.26 no.3
• /
• pp.254-262
• /
• 2014

In this study, the colorants of Wisteria floribunda leaf were extracted with water. Silk and wool fabrics have been dyed with the aqueous extract of Wisteria floribunda leaf and their dyeabilities was studied. Additionally the fastness to washing, drycleaning, light and perspiration were also investigated. Silk and wool fabrics dyed with the extract of Wisteria floribunda leaf were colored in yellowish red tint. The optimum dyeing condition of the colorants extracted from Wisteria floribunda leaf was three repeated dyeing at 70, $95^{\circ}C$ for 1hr using post mordanting. For dyed silk and wool fabrics, the fastness to washing was improved by mordanting, and the fastness to drycleaning was very outstanding.

• The korean journal of orthodontics
• /
• v.26 no.5 s.58
• /
• pp.497-507
• /
• 1996

The aim of present study in vitro was to evaluate and compare the effects of different washing times of enamels etched with low phosphoric acid solution which makes unsoluble salts and etched but contaminated with saliva on shear bond strength of an orthodontic adhesive to enamel, and to observe the washing effect on the etched enamel surface by scanning electron microscope. All brackets were bonded with Mono-$Lok2^{TM)}$) on the labial surface of extracted human bicuspids after etching with $20w/w\%\;and\;37w/w$ and phosphoric acid solution for 60seconds and then washing for 0,5,10 and 20seconds respectedly. After etching with $37w/w\%$ phosphoric acid solution and contaminating with saliva for 30seconds and then washing for 0,5,20 and 30seconds and re-etching for 10seconds. After 24hours passed in the $37^{\circ}C$ water bath, the shear bond strengths were measured on Universal Test Machine. The data were evaluated and tested by ANOVA and Duncan's multiple range test, and those results were as follows. 1. There was no significant differences between (p>0.05) shear bond strength of bonded brackets with 5, 10, 20seconds washing etched enamel using $37{\%}w/w{\%}$ phosphoric acid solution. 2. The shear bond strength of bonded brackets with $20w/w\%$ phosphoric acid and then washing for 5seconds showed bonded strength durable to occlusal force but its coefficiency score was high and etched surface was not cleaned completely and therefore it was assumed that its clinical application is not applicable. 3. There was no significant differences between (p>0.05) shear bond strengths of bonded brckets with washing for 5seconds etched enamel using $37w/w\%$ phosphoric acid solution and 10,20 seconds washing etched enamel using $20w/w\%$ phosphoric acid solution. 4. The shear bond strength of washing for 5seconds etched enamel which was contaminated with saliva showed sufficient bonded strength durable to occlusal force but its coefficiency score was high and therefore its clinical application was not applicable. 5. After etching, the sample contaminated with saliva showed the sufficient shear bond strength even washing 20seconds without re-etching.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.11
• /
• pp.151-159
• /
• 2016

This paper proposes a ceramic heating element-based tankless instant electric water heater for hand/face washing that does not require a lot of hot water. The heating module, which heats the input water and outputs hot water, operates the ceramic heating element detecting input water using a flow sensor. Inside of the heating module is designed to form one flow path in order to get almost $15^{\circ}C$ increased heated water compared to the input water temperature within 2 second after 1.5 liter per minute water supply. The design validity is verified using a heat flow analysis of the water flow and temperature variations inside of the heating module also. Based on the design data, the heating module is constructed including a single rod-type ceramic heating element. After that, a prototype system having temperature setting function by three steps were constructed. The prototype system is connected to a 1.5 liter per minute water supply line, and the water output temperature and time measurement experiments confirmed that the proposed system output the heated water increased by $18.3^{\circ}C$ in case of third step setting within 2 second after water supply. And standby power is under 1 W and peak power does not exceed the permissible range for the general house usage. Several performance results verify that the proposed tankless instant electric water heater is applicable for the washstand of the house, highway rest area and factory so on as winter-time hand/face washing.

• Journal of Environmental Science International
• /
• v.10 no.6
• /
• pp.401-405
• /
• 2001

For the purpose of developing a new process f3r the elimination of oil components from oily waste water, experimental researches using oil gelling agent were performed. The process is composed of three units, that is, decantator, gelling column and adsorption column. 10g of gelling agent in the gelling column could effectively absorb 15.65g of oil from ship washing waste water and 16.93g of oil from steel industry waste water. COD in waste waters dramatically diminished not in the gelling column but in the adsorption column. The .gelling is hindered by other organic components in waste water, and the optimum space time f3r the gelling column Is 20min. 1g of gelling agent absorbed 3.7-4.0g of oil from waste waters with 25 min in the batch operation.

• Food Science of Animal Resources
• /
• v.25 no.3
• /
• pp.265-270
• /
• 2005

This study was carried out to investigate the effects of washing times on quality characteristics of chicken breast surimi. The surimi was prepare after 2 (C), 4 (T1) and 6 (T2) times washed with a ratio 6 : 1 distilled water-chicken breast meat. The moisture and crude protein content of T1 and T2 were higher than that of C. The myofibrillay protein and yield of C was higher (p<0.05) than those of T1 and T2. The pH of C was higher (p<0.05) compare to other treatments. The WHC was no significant differences between the all treatments. The shear force of all treatments were tended to higher as washing times increased. The breaking force and deformation value of T2 were lower than other treatments. The $L^{*}$ values in C and $b^{\ast}$ values in T1 were significantly (p<0.05) lower among the treatments group. The hardness and gumminess of T1 was higher (p<0.05) compared to T2. The springiness of treatments increased as washing times increased. The sensory score of surimi made from chicken breast meat was not affected by the washing times.

• The Korean Journal of Pesticide Science
• /
• v.10 no.4
• /
• pp.306-312
• /
• 2006

The objective of this study was to compare the reduction of residues in/on mini-tomato by washing methods and to evaluate the relation of reduction rates in different pesticides. Mini-tomato was sprayed with three commercial pesticides, oxadixyl, thiophanate-methyl and chlorothalonil, and harvested for washing test as 0, 5 and 7 days elapsed. The reduction rates of oxadixyl in/on mini-tomato were 61, 11 and 4%, those of thiophanate-methyl were 89, 89 and 79%, and in case of chlorothlaonil, reduction rates were 84, 84 and 88%, respectively When mini-tomato at 0 day and 5 days after spray was washed by 0.02% of $Sur-ten^{(R)}$ solution, its pesticide residues were reduced by 81 and 55% on oxadixyl, 95 and 91% on thiophanate-methyl, and 97 and 98% on chlorothlaonil. When three wettable powdered pesticides with the same recipe were sprayed, their reduction rates in/on mini-tomato by washing with water at 0, 5 and 7 days were 76, 66 and 43% on oxadixyl, 91, 83 and 82% on thiophanate-methyl, and 65, 68 and 82% on chlorothlaonil, suggesting that the washing effect may be dependent on the amounts of active ingredients and inert types of the pesticides used.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.5 no.1
• /
• pp.9-14
• /
• 1981

The influence of laundering conditions on calcium deposition on the fabric was studied by repeated laundering the cotton fabric with soap in the hard water of 200 P.P.M. $CaCO_3$. The experimental variables were: 1) soap concentrations ($0.06\%$, $0.13\%$, $0.25\%$), 2) water contents in the fabric after hydroextraction. ($65\%$, $150\%$, $315\%$), 3) builders (Na-EDTA, sodium carbonate, sodium metasilicate), 4) washing cycle (5, 10, 15, 20 cycles). The fabric was washed for 15 minutes at $23\pm1^{\circ}C$ in a washing machine (Model; Gold Star Wp-2005) under the similar conditions with those of home laundering, and rinsed 5 times for 5 minutes. The amount of calcium deposits on the fabric was determined by the EDTA-Back titration method described by Wasserman and Basch. Results of this study were follows: 1) The amount of calcium deposits on the fabric increased with increasing wash cycles. 2) During the rinsing process, residual calcium content on the fabric increased with water content in the fabric after hydroextraction. 3) The amount of calcium deposits on the fabric decreased with the increasing soap concentration above the equivalent amount of calcium ion content in the water. 4) Sequestering agents and alkaline builders influenced the amount of calcium deposits on the fabric. The amount of calcium deposits on the fabric was in the order of sodium metasilicate, sodium carbonate, nonbuilder, and EDTA.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.27 no.5
• /
• pp.495-500
• /
• 1994

Mackerel water-soluble protein solution Mackerel meat washing water were concentrated by isoelectric point shifting precipitation process, and the concentrates were utilized as a material for processing of an elastic gel food such as kamaboko. The water-soluble proteins were partly polymerized during the isoelectric point shifting precipitation process. Then, the water soluble protein concentrates were partly substituted for frozen minced Alaska pollack meat in processing of a good quality kamaboko. The maximum substitution percentage for good quality kamaboko manufacturing was concluded to be below $30\%$, according to the criteria of color difference, jelly strength and folding tests using the substituted recovered protein concentrates.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.6 no.1
• /
• pp.9-15
• /
• 1982

The influence of builders on calcium deposition on the fabric was studied by laundering the cotton fabric with sodium carbonate, sodium metasilicate, sodium tripolyphosphate and built detergents in hard water. The laundry variables were: 1) Washing cycles: 5, 10, 20, 30 and 40 cycles. 2) Water hardness: 100 ppm, 150 ppm, 200 ppm and 300 ppm. 3) Builders: $Na_2\;CO_3,\;Na_2\;SiO_3$ and STPP. 4) Detergents: Na-DBS, $Na-DBS+Na_2CO_3,\;Na-DBS+Na_2\;SiO_3,\;Na-DBS+STPP,\;Na-DBS+Na_2\;CO_3+STPP$, and $Na-DBS+Na_2\;SiO_3+STPP$. The fabric was washed for 15 minutes at 23+$1^{\circ}C$ in a washing machine(Gold Star WP 3007) under the similar condition with those of home laundering, and rinsed 3 times in the same water hardness for 5 minutes. The calcium deposits on the fabric was determined by EDTA-BACK titration methods. The results of this study were as follows: 1) The amount of calcium deposits on the fabric was increased with increasing wash cycles. This deposit was due to the build up of insoluble calcium carbonate. 2) As the water hardness increased, the amount of calcium deposits on the fabric was increased. 3) Alkaline builders, such as, $Na_2CO_3$ and $Na_2SiO_3$, promoted calcium deposition on the fabric, however STPP prevented calcium deposition on the fabric. 4) Fabric laundered with $Na-DBS+Na_2CO_3$ showed the highest calcium deposits on the fabric, and decreased with the order of $Na_2CO_3$, $Na-DBS+Na_2SiO_3$, and Na-DBS. And fabrics washed with phosphate-built detergents showed a small amount of calcium deposition.